Zest 4 Leisure Salisbury User manual

Assembly Instructions
(W x D x H) 1.619m x 1.308m x 2.15m
Product Name: Salisbury Corner Seat
Pressure Treated products should not be treated with any other products for the first month.
PLEASE KEEP THESE INSTRUCTIONS
Zest4Leisure
01352 752555 option 1 –[e-mail]
V2-08.14

Salisbury Corner Seat Assembly Instructions
Requires 2 person assembly.All screw holes to be pre-drilled.
Tools required: Corded / Cordless Drill, Pozi-drive Bit / Screwdriver, 3mm Drill Bit, Tape
Measure.
Salisbury Corner Seat Pack List
Item Description Quantity
A Seat Support 2
B Post/TrellisAssembly 2
C Seat 1
D Fascia 1
E1,E2 Long Rafter, Short Rafter 2
F Rail 1
G Bracing Rail 1
H Slotted Rafters (LH, RH & C) 3
Fixings
120mm Screws 4
90mm Screws 4
60mm Screws 22
40mm Screws 31
www.zest4leisure.co.uk

Please take a few moments to check all pack contents listed.
Please contact “Zest4Leisure” directly if any of the pack contents are damaged
or missing. Contact telephone: [phone] option 1 or email:
[email protected]
Assembly requires 2 persons. All screw holes to be pre-drilled.
Tools required: Corded/Cordless Drill, Pozi-drive Bit/Screwdriver, 3mm Drill Bit,
Tape Measure.
Salisbury Corner Seat is now complete.
1. Position Seat SupportA between posts at a height of 400mm (nom.) from base of
posts. Fix in position using 2no 90mm Screws (Fig.1a) and 2no 120mm Screws
(Fig.1b).
Repeat procedure for remaining Seat SupportA and Post/Trellis Assembly B.
2. Position Seat C and Post/Trellis Assemblies B as shown in Fig.2a (ensuring
narrower posts are rearmost). Attach Seat C to Seat SupportsA using 24no
40mm Screws –12no per side.
Attach Fascia D to Seat SupportsA using 4no 40mm Screws –2no per side
(Fig.2b)
Attach Seat C to Fascia D using 3no 40mm Screws (Fig.2c).
3. Ensuring scalloped ends are faced downwards, attach Long Rafter E1 to Short
Rafter E2 using 2no 60mm Screws (Fig.3a).
Position Rail F as shown in Fig.3b and attach to both Rafters E1 & E2 using 4no
60mm Screws.
Attach Bracing Rail G to Rafters E1 & E2 using 4no 60mm Screws, ensuring
underside of rail is flush with underside of rafters (Fig.3c).
Ensuring correct orientation of Slotted Rafters H, equispace and fix to Rail F
using 3no 60mm Screws (Fig.3d). Invert rafter assembly and attach rafter ends to
Bracing Rail using 3no 60mm Screws (Fig.3e)
4. Locate rafter assembly onto notched post tops and fix in position through posts
using 2no 60mm Screws per front post (Fig.4a) and 1no 60mm Screw per rear
post (Fig.4b)

www.zest4leisure.co.uk
1b1a
2a 2b
2c 3a
3b 3c

www.zest4leisure.co.uk
3e3d
4a 4b