Zest 4 Leisure Aquatic Planter User manual

Assembly Instructions
(W x D x H) 1.80m x 0.90m x 0.30m
Product Name: Aquatic Planter
PLEASE KEEP THIS INSTRUCTION
Zest4Leisure
01352 752555 option 1 –[e-mail]

Aquatic Planter Assembly Instructions
Requires 2 person assembly.All screw holes to be pre-drilled.
Tools required: Corded / Cordless Drill, Pozi-drive Bit / Screwdriver, 3mm Drill Bit.
Aquatic Planter Pack List
Item Description Quantity
A End Panel 2
B Side Panel 2
C Long Capping Trim 2
D Short Capping Trim 2
Liner 1
Fixings
60mm Screws 30
www.zest4leisure.co.uk

Please take a few moments to check all pack contents listed.
Please contact “Zest4Leisure” directly if any of the pack contents are damaged
or missing. Contact telephone: [phone] option 1 or email:
[e-mail]
Assembly requires 2 persons. All screw holes to be pre-drilled.
Tools required: Corded / Cordless Drill, Pozi-drive Bit / Screwdriver, 3mm Drill
Bit.
Aquatic Planter is now complete.
1. Interlock End PanelsA with Side Panels B (Figs.1a & 1b) to form a rectangular
planter.
2. Secure in position using 8no Screws - 2no per internal corner (Fig.2a) and 12no
screws - 3no per external corner (Fig.2b).
3. Place Liner into planter ensuring edges of liner are flush with outside edge of
planter.Position Long Capping Trim C, ensuring internal face is flush with planter
body and rounded corner outermost. Fix in position as shown in Fig.3a using 3no
Screws.
Fix Short Capping Trim D as shown (circled)in Fig 3b using 2no Screws.
Similarly fix remaining capping trims.

www.zest4leisure.co.uk
1b1a
3a 3b
2a 2b