Zest 4 Leisure Sleeper Raised Bed User manual

Assembly Instructions
(W x D x H) 1.80m x 0.45m x 0.45m
Product Name: Sleeper Raised Bed
Pressure Treated products should not be treated with any other products for the first month.
PLEASE KEEP THESE INSTRUCTIONS
Zest4Leisure
01352 752555 option 1 –[e-mail]
V2-08.14

Sleeper Raised Bed Assembly Instructions
Requires 2 person assembly.All screw holes to be pre-drilled.
Tools required: Corded / Cordless Drill, Pozi-drive Bit / Screwdriver, 3mm Drill Bit.
Sleeper raised Bed Pack List
Item Description Quantity
A End Panel 2
B Side Panel 2
C Long Capping Trim 2
D Short Capping Trim 2
Fixings
60mm Screws 18
www.zest4leisure.co.uk

Please take a few moments to check all pack contents listed.
Please contact “Zest4Leisure” directly if any of the pack contents are damaged
or missing. Contact telephone: [phone] option 1or email:
[e-mail]
Assembly requires 2 persons. All screw holes to be pre-drilled.
Tools required: Corded / Cordless Drill, Pozi-drive Bit / Screwdriver, 3mm Drill
Bit.
The Sleeper Raised Bed is now complete.
1. Interlock End Panels A with Side Panels B (Figs.1a & 1b) to form a rectangular
planter.
2. Secure in position using 8no Screws (2 per corner). See Figs.2a & 2b.
3. Position Long Capping Trim C, ensuring internal face is flush with planter body
and rounded corner outermost. Fix in position as shown in Fig.3a using 3no
Screws.
Fix Short Capping Trim D as shown (circled) in Fig 3b using 2no Screws.
Similarly fix remaining capping trims.

www.zest4leisure.co.uk
1b
1a
2a
2b
3a 3b
2b