Zest 4 Leisure Twilight Arch 00001 User manual

www.zest4leisure.co.uk | 01352 752555 option 1 | [e-mail]
V5
Assembly Instructions
Twilight Arch
(W x D x H) 2.1m x 0.72m x 2.13m
PLEASE KEEP THESE INSTRUCTIONS
Code: 00001
is product is made from pressure-treated timber. It should not be painted
or coated with any other treatment until at least 6 months after purhcase

www.zest4leisure.co.uk | 01352 752555 option 1 | [e-mail]
Twilight Arch Assembly Instructions
Requires 2 person assembly.
Tools required: Corded / Cordless Drill, Pozi-drive Bit / Screwdriver, Tape Measure. 3mm
Drill Bit required in order for you to drill all screw holes before construction.
Fixings Quantity
60mm Screws 34
Product Name Pack List
Item Description Quantity
A Rail 2
B Rafter 5
C Post 4
D Trellis Panel 2
E Bracing 4

www.zest4leisure.co.uk | 01352 752555 option 1 | [e-mail]
Please take a few moments to check all pack contents listed.
Assembly requires 2 persons.
Tools required: Corded/Cordless Drill, Pozi-drive Bit/Screwdriver, Tape Measure, 3mm
Drill Bit required in order for you to drill all screw holes before construction.
1. Position Rafters B 150mm from edge at both ends of Arches A and fix using 4no 60mm Screws - 2 per
Rafter (Fig.1a). Space out remaining Rafters B evenly (Fig.1b) and attach using 6no 60mm Screws.
2. Locate Post C onto Arch A as shown in Fig.2a (adjust width to suit). Fix in position using 2no 60mm
Screws (Fig.2b).
3. Place Trellis Panel D 400mm from base of Post C and fix in position using 2no 60mm Screws
(Figs.3a & 3b).
4. Position second Post C as shown in Fig.4a and fix to Arch A using 2no 60mm Screws.
Fix Trellis Panel D to second Post C using 2no 60mm Screws (Figs.4b & 4c).
Repeat stages 1-4 for remaining Posts & Trellis Panel on opposite side of arch.
5. Ensuring Post C is perpendicular to Rail A, place Bracing E as shown in Fig.5 and fix in position using 2no
60mm Screws.
Repeat procedure for remaining bracings.

www.zest4leisure.co.uk | 01352 752555 option 1 | [e-mail]
Please take a few moments to check all pack contents listed.
Assembly requires 2 persons.
Tools required: Corded/Cordless Drill, Pozi-drive Bit/Screwdriver, Tape Measure, 3mm
Drill Bit required in order for you to drill all screw holes before construction.
1a
2a
3a
4a
1b
2b
3b
4b

www.zest4leisure.co.uk | 01352 752555 option 1 | [e-mail]
Please take a few moments to check all pack contents listed.
Assembly requires 2 persons.
Tools required: Corded/Cordless Drill, Pozi-drive Bit/Screwdriver, Tape Measure, 3mm
Drill Bit required in order for you to drill all screw holes before construction.
4c 5