Zest 4 Leisure Rabbit Hutch 1.2m User manual
Assembly Instructions
(W x D x H): 1.220m x 0.635m x 1.065/0.975m
Product Name: Rabbit Hutch 1.2m
Pressure Treated products should not be treated with any other products for the first month.
PLEASE KEEP THIS INSTRUCTION
Zest4Leisure
01352 752555 option 1 –sales@zest4leisure.co.uk
V1-03.16
Rabit Hutch 1.2m Assembly Instructions
Requires 2 person assembly.
Tools required: Corded/Cordless Drill, Pozi-drive Bit / Screwdriver, 3mm Drill Bit
required in order for you to drill all screw holes before construction, hammer.
The colour version of this document can be downloaded from:
www.zest4leisure.co.uk/downloads/category/C1
Rabbit Hutch 1.2m Pack List
Item Description Quantity
A Back Panel 1
B Side panel (Handed) 2
C Front panel 1
D Floor Panel 1
E Brace 8
F Internal Panel 1
G Roof Panel 1
H Felt 1
J Back/Front Fascia 2
K Side Fascia 2
Rabbit Run –Optional Extra
L Rabbit Run Back Panel 1
M Rabbit Run Side Panel 2
N Rabbit Run Front Panel 1
www.zest4leisure.co.uk
Fixings
30mm Screws 6
40mm Screws 30
50mm Screws 37 + 26 (for Rabbit Run)
Felt Nails 28
Rabit Hutch 1.2m Assembly Instructions
Requires 2 person assembly.
The colour version of this document can be downloaded from:
www.zest4leisure.co.uk/downloads/category/C1
www.zest4leisure.co.uk
Rabbit Hutch 1.2m is now complete.
1. Fix Back PanelA to Side Panels B using 6no 50mm Screws, 3no per side (Figs.1a & 1b)
2. Fix Front Panel C to Side Panels B using 6no 50mm Screws, 3no per side (Figs.2a &
2b)
3. Attach Floor Panel D to Back PanelA and Front Panel C using 6no 30mm Screws –2no
into Back PanelA and 4no into Front Panel C (Figs.3a & 3b).
With the assembly laid on its back and the entry ramp fully opened, further attach Floor
Panel D to Side Panel B using 3no 50mm Screws as shown in Fig.3c.
4. Fix 8no Braces E as shown in Fig.4 using 16no 50mm Screws –2no per Brace E.
5. Attach Internal Panel F to battens of Back Panel A and Front Panel C as shown in
Fig.5a using 6no 50mm Screws –3no into each panel.
Further attach Internal Panel F to Floor Panel D using 2no 40mm Screws (Fig.5b).
6. Position Roof Panel G centrally over assembly and attach using 12no 40mm Screws –
4no into each of the Back and Front PanelA and C and 2no into each Side Panel B
(Fig.6).
7. Fix Felt H to the Roof Panel G using 28no equally spaced Felt Nails around the sides as
shown in Fig.7.
8. Attach Front and Back Fascias J to Roof Panel G using 10no 40mm Screws –5no per
Fascia J (Fig.8a)
Attach Side Fascias K to Roof Panel G using 6no 40mm Screws –3no per Fascia K
(Fig.8b)
Rabbit Run –Optional Extra
9. With the assembly up side down Place Rabbit Run Back Panel L between legs of Side
Panels B and fix in position using 7no 50mm Screws –2no into each leg and 3no into
Back Panel A (Figs.9a & 9b).
10. Place Rabbit Run Side Panels M between legs of Side Panels B and fix in position using
12no 50mm Screws –2no per Side Panel B (Fig.10a) and 2no per leg of Side Panel B
(Fig.10b).
11. Place Rabbit Run Front Panel N between legs of Side Panels B and fix in position using
7no 50mm Screws –2no into each leg and 3no into Front Panel C (Figs.11a & 11b).
www.zest4leisure.co.uk
1b1a
2a 2b
3a 3b
3c 4
www.zest4leisure.co.uk
5b5a
6 7
8a 8b
www.zest4leisure.co.uk
9b9a
10a 10b
11a 11b
Rabbit Run –Optional Extra
Table of contents
