Zetronix OMINI-PRO User manual

OMINI-PRO
Bluetooth Hidden Cam Alarm Clock
USER MANUAL

DIAGRAM

APP INSTALLATION
For iOS Devices:
a. Scan below QR Code for iOS operating system to download and install
“Camama” APP with iPhone or iPad devices.
b. Search “Camama” in App Store with your iOS devices, download and
install App.
For Android Devices:
a. Scan below QR Code for Android operating system to download and
install “Camama” App with Mobile or tablet devices.
b. Search “Camama” in Google Play with your iOS devices, download
and install App.
iOS Device QR Code
Android Device QR Code

ADDING A CAMERA
A. Connected the power supply and turn on the device by ON/OFF
switch. The green light will flashing and the camera are waiting to be
connected.
B. Enter your phone “settings”-> choose “WLAN”-> find the camera’s
hot-spot signal (the name of the signal is “Camama_XXXXX”),connects
the camera’s hot spots.
Important Note!
If you can not find the camera’s hot-spot signal, please reboot the device
by press the reset button about 5s until listening a sound of “Ding”, after
that, the hot spot signal will come up again and you can connect it for
next steps.
C. Load the APP (Camama) and click the button to add new

device->choose “Search in LAN”->Click the device ID and Saved. After
this step Finished, the camera has been added to the App and you can
watch the video via hot spots at distance of 10-15m range(Point-Point
Mode).

Please noted: On the above step, some of IPhone user can’t find the
device, how to resolve it?
If you’re using IOS14.0 or above, when you connect the device at the first
time, please shut-off the cellular data of your phone, then go back to app
and refresh it, then you’ll find the device come up, after connection was
done, you can turn on the cellular data of your phone.
REMOTE LIVE FEED SETUP
Click the setting button->Choose the “WIFI Setting”->Click the” Manage
Wi-Fi networks” and choose your home wifi and input your passwords,
then click the OK button. Waiting for about 5~10 second. when it shows
“online” again, it means the wifi setting is successful.
After this step was done, the second green light will not flashing, it
means the camera has been connected to router successfully, then you
can watch your home and access the live feed at any anytime from
anywhere by your mobile phone (Remote Control)
Note:
1.After input your wifi passwords and config the connection, the device
will restart automatically and wait for the camera to restart, which will
be completed in about 20-40 seconds. During the connection process,
please do not shut-off the device manually.
2.When connecting to WiFi, please make sure input the correct WiFi
password. If the passwords is wrong, the camera will be offline, then you
need to reboot the device and re-pair it.

REMOTE LIVE FEED VIEWING
(Live Stream and Remote 7/24 Monitoring from anywhere)

MOTION DETECTION SETUP
Click the setting button->Choose the “Alarm Setting” to set motion
detection.
You can active the motion mode here and choose the levels of motion
detection. It has 4 levels of motion(Low, Medium, High, Max)

LOCAL RECORDING SETUP
Click the setting button->Choose the “Other Setting” to setting SD Card.
You can active the SD card recording while insert a Micro SD card, you’re
able to choose the 3 recording modes (Full time recording, Alarm
recording and Timing Record)
Notes:
This camera support both recording with/without SD card.
A. If without SD card, it records videos and saves them to your smart
phone storage.
B. If with SD card, the device recording automatically and save the
videos to SD card, and it also saves the recordings to your smart
phone as well.

BLUETOOTH SETUP
Long press the Bluetooth switch to turn on/off the clock Bluetooth. Enter
the Bluetooth setting on your phone, search and find the device’s
bluetooth name “Amzcev” and connected it, then you can enjoy great
music by this bluetooth speaker, the bluetooth distance is about 10-15m.
(PS:You could control the voice by your phone or media player)
CLOCK SETTINGS
1. Setting alarm: Long press the alarm switch button to turn on/off.
When the alarm turn on, press the alarm switch button one time to set
the hour, press two times to set the minute. Press the “+” or “-” button
to set the time.
When the alarm goes off, the clock will make a drip sound for 60 seconds.
Press any button to turn off the sound.
2. Setting time: Press the “M” button one time to setting the hour, Press
the “M” button two times to setting the minute. Press the “+” or “-”
button to set the time.
3. Setting the hour system: Press the “+” button one time to choose
24-hour system or 12-hour system. When you choose 12-hour system,
the clock would show the AM/PM sign.

QUICK TROUBLESHOOTING
What can I do if the camera is offline, shut-down or not working?
Please reboot the device to factory settings, then connect the hot-spot
signal and do the Wi-Fi configuration again.
What kind of MicroSD card is required for recording?
The camera supports 8G-128GB MicroSD cards. Please use high speed
class 10 FAT32 formatted memory card. Note that cards above 32GB
come as exFAT, so they need to be formatted as FAT32 using the App.
Why can't use my MicroSD Card for recording?
You should format the MicroSD first before using. If SD card is not
recognized, just remove the card and re-insert it.
Why can't the camera go online?
1. No power connected.
2. Check if your router is working properly.
3. Weak Wi-Fi signal
4. Wrong password in Wi-Fi setting.
Why is remote monitoring glitchy?
You should choose a suitable resolution to watch according to your
internet speed.
Why I can't save to my SD card?
Please make sure you have turn-on the SD card recording function in App,
and the SD card must be formatted at the first time to use it.
If I forgot my password?
Press and hold the reset camera button (see diagram) for 5 seconds to
restore the device to factory setting, then you have to re-connect the
Wi-Fi and set a new password.
Reminder:
The default password for the camera is 123456. Please change your own
passwords to ensure the security of your camera

SPECIFICATIONS
Resolution Ratio
4K/2K/1080P
Video Format
AVI
Frame Number
30
Visual Angle
120 degree
Motion Detection Recording
Straight line 6 meters
Compressed Format
H.264
Night Version
5~8M
Recording Range
20 ㎡
Consumption
2A/5V
Storage Temperature
-20-80 degree centigrade
Operating Temperature
-10-60 degree centigrade
Operation Humidity
15-85%RH
Memory Card Type
TF card
Player Software
Mainstream player
Mobile Phone Operating System
Android/iOS