Notes on safety
This section presents important information intended to ensure safety and effective use of
the printer. Please read carefully.
Be sure to use the specified battery and power source provided by our company.
Connection to an improper power source may cause fire , explosion or damage to the
printer.
Don’t put the battery into the fire or water, don’t disassemble or modify the battery,
don’t be short circuit, otherwise may result in injury or fire even explosion.
Please don’t open the paper room cover when it is printing or just when printing is over, do
not touch the print head with hand or body, overheat may cause scald.
Notes on using
1、Do not store the printer in hot and humid conditions.
2.、The lithium battery have a character that if it is not used for several months, it possibly
can’t be charged ever. So for that, we suggest to use the adapter what less than 1A for
charging .
3、The printer’s power adapter is to be connected to a stable power 100~240Volts, please do
not use other devices on the same power socket, to avoid voltage fluctuations.
4、Avoid water or conductive material (for example: metal). If water is present on the
surface please turn off the power immediately.
5、Please ensure that a thermal paper roll is always inserted in the printer to avoid damaging
the printing roller and the printer head.
6、Please ensure that your printer is serviced and repaired by a qualified technician. No
responsibility is taken for misuse and/or non-qualified servicing.
7、In order to ensure print quality and longevity of your printer, please ensure that only good
quality thermal paper rolls are used.
8、Please keep this manual in a safe place, where it can be accessed easily and used for your
reference.
