Zjiang ZJ-5890T User manual

58mm Thermal Receipt Printer
-Operating Manual

Version
Feb, 2017
All Rights Reserved
This manual is the Company's intellectual property rights, copyright protection
of the manual contains proprietary information, without prior written permission is
strictly prohibited in any form or by any machine, electronic or other means to copy
any part of this manual.
Statement
Thank you for purchasing our series of printer paper,
Series 58 thermal receipt p r i nter, use the hand this manual will help you understand
the most comprehensive series of machine functions and operations, we are very
careful preparation of this manual, although the manual strive to be accurate , but
we are the contents of this manual can not be guaranteed to be completely correct,
because our products have b een continuous improvement and updating, so my
company the right to modify without notice reservations I f u sers need further
information about our products, contact your local dealer.
this manual a pplicable
Safety Precautions
Please be sure to read this manual carefully before using the printer operation
to ensure correct and safe use of the printer.
Warning：Don’t touch the printer paper cutter and tear serrated avoid scratching
Warning: Print head for the heat-generating components, just after the end of the
printing process and print can not touch the print head and the surrounding parts,
in order to avoid burns.
Warning：Don’t plug the interface cable in the charged state, in order to avoid
damage to the printer and personal electric shock.
1. Don’t use and storage of the printer on t he high temperature, high humidity
and pollution.
2. The printer's power adapter is connected to a properly grounded outlet, avoid
large motors or other power supply voltage fluctuations can cause the device
to use the same socket.
3. Avoid water or conductive material (such as: metal) into the inside of the
printer, in the event, immediately turn off the power.
4. The printer can not print without paper state, otherwise it w ill seriously
damage the platen and the thermal print head.
5. Users are not allowed to disassemble the printer for repair or renovation.
6. Power adapter Use only the designed with the power adapter or 12V - 3A
standard power adapter.
7. In order to ensure the print product quality and life , we ecommend using
r
equivalent quality thermal paper.
8. Keep manual for future use reference。
Precautions
Security Warning

POWER Green Blue Light
OFF
ON
ON
（/）FEED Red Light
OFF
Flash
ON
（ ） Printer Status
Turn Off
Turned on
and no paper
Have Paper
In the case of a power, holding the FEED button, Paper Feed
In the off state and the FEED button while holding down the POWER button,
and then release the POWER button for two seconds and then release the
FEED button
The printer
self-test
58 mm Thermal Receipt Printer Operating Manual
12
1.Application Area
Cash register and POS System receipt printing
EPT and POS System receipt printing
Sports, postal services, aviation receipt printing
Inquiry, bill printing service system
Measuring Instruments Data Printing
Tax receipt printing
2.Technical Parameters
Print Method: Thermal Line Printing
Print Character: 384dot/Line ; ANK Character
Font A:12*24dots,1.5(W)*3.0(H)mm
Font B:9*17dots,1.1(W)*2.1(H)mm
Font C:19*24dots,1.1(W)*3.0(H)mm
Simplified / Traditional:12*24dots,1.5(W)*3.0(H)mm
Print parameters: Support Download Logo trademark Print
(Support bar-code types: UPC-A / UPC-E / JAN 13 (EAN13) / JAN8 (EAN8) / CODE39 / ITF / CODABAR /
CODE93 / CODE128 ; Two-dimensional code: QR CODE)
Chinese characters: GB Store a two-point support GB18030 24x24 large font support Taiwan, Hong Kong
Traditional
Spanish: ASC11 12 × 24 points
Extended Character Table:
OEM437/Katakana/OEM850/OEM860/OEM863/OEM865/West Europe/
Greek/Hebrew/East Europe/Iran/WPC1252/OEM866/OEM852/
OEM858/IranII/Latvian/ Arabic/PT151,1251/OEM747/
WPC1257/Vietnam/OEM864/Hebrew/WPC1255/Thai
Print Speed: 90mm/sec
Interface: USB / COM /LTP / LAN
Print Command: Compatible with ESC/POS
Print Width：57.5±0.5mm
Roll Diameter: 50 mm
Print Thickness: 0.06-0.08mm
Power: DC 12V/3A
Cash Drawer Control: DC 12V/1A
Reliability Print:100km
Temperature:0-45℃
Contrast Humidity:10-80％
Drivers: Win 2000/ Win2003/ Win XP/ Win Vista/ Win 7/ Win 8/Win 10/ Linux
Compatible with EPSON, SAMSUNG
3.Installation Roll Paper
58 thermal printer using thermal 58mm paper roll, using easy paper loading mechanism, very convenient
paper loading.
Thermal printer maximum outer diameter of 75mm.
Thermal paper installation method is as follows:
（1） Open the printer cover.
（2） Thermal paper roll as shown in the following figure into the paper loading position.
（3）Pull out the paper short to box outside, close the top cover.
（4）Remove the excess with a knife-edge machine rolls.
Button Instruction
4.Driver Installation (for USB Port)
Note: Please make sure the printer is turn on, and the paper is in right direction before this step.
1：Insert the CD driver, and find the driver in the menu (58, 80 series printer driver software),
then click it to start the installation, you will see the pictures as below which need to choose
the language:

58 mm Thermal Receipt Printer Operating Manual
34
2 Choose the language you will use, and click” OK”, you will see following picture. Click
“Next”:
：
3 Then you will find following picture, just click “ I accept”, then “Next”:：
4. You will see following picture, you can choose the default path, also can save the driver to
anywhere you want :
5. Click “Next”, then you will find following picture, here choose “Install”. If your PC have any
anti virus software, please allow this install.
6. After the installation, you will see the following picture, choose the system of the PC you
using and the the model of printer you using(POS 58Series Printer). Then click “USB Port
Check”. If the installation is successful , the printer will print some words to show the
installation is ok.

58 mm Thermal Receipt Printer Operating Manual
56
7.Click “Begin Setup”,You will see following picture, choose “Install”,
Then “install this driver anyway”
8 When finish, please find the printer driver”pos 58” in the control panel of your PC,then
right click the “ Printer Property”, you will find the following picture
：
Select your printer port that matches the "port" option, select the printer you want to feature
in the “device settings”. In conventional option "Print Test Page" to verify that OK.
If the Test print is ok, then the printer can working now. If it shows: Error, Please click “Ports’
again, choose: USB001, or USB002 , or USB003.
5.Lan Port Settings Operating Instructions
1 Obtain the IP address of the machine through a self-test
Press and hold the printer "paper feed button (Feed)", at the same time turn on the printer,
release the FEED button after 1.5 seconds (Feed),then the printer will begin to print
a self-test, IP address of the machine to print a self-test will be listed on a single.
（ The factory default setting is：192.168.1.100）
、
Noted: If need to modify the IP address of printer, please do it by the tool "
Printer_tools_V3.1.exe" of the enclosed CD disc.

58 mm Thermal Receipt Printer Operating Manual
78
2 Set network port shown as following: Choose “Port”, then click “Add port” 、
3.Choose the “standard TCP / IP port”, and then click the New Port, as shown below.
4. According Add Standard TCP / IP Printer Port Wizard, click Next continued following the
installation, as shown below:
5..Input IP address which you can find on the self-test page, as shown below:
6.Click next, and then you will see following picture, select the type of device --- the standard
way, and then click Next to continue the installation, as shown below:

58 mm Thermal Receipt Printer Operating Manual
910
7.According Add Standard TCP / IP Printer Port Wizard, click “Finish “to complete the installation,
as shown in the following figure:
8. Find the printer driver-pos58 , Click the “Printer property”, and choose the “Ports”, select the
correct IP port, click "Apply", as shown below:
9.Return to the "General", click "Print Test Page", as shown below:
6.The operate instruction of RS232/Parallel port
6.1 For RS232 (COM)port (If you printer is rs232 port)
1.Open the Printer Properties screen, and then select the "Port" item, as shown below:

58 mm Thermal Receipt Printer Operating Manual
11
12
2.Select the list of ports "COM1" → "Configure Port", choose the right option. Here are our
default parameter, you can see the parameters of serial port from self-test page
Click "Apply", then click "OK", you will see the following picture:
(Note: This setting must consistent with the setting parameters of serial port from the
self-test page, otherwise it may print garbled words will be garbled words)
Click "Apply" again.
Return to the "General" tab, click "Print Test Page" as shown below:
If the printer prints a normal page, then it shows that the connection is successful.
If you feel the print speed is slow, please click on the "Device Settings" → " Print Mode" →
Choose "soft font" button as shown below, then “Apply”:

58 mm Thermal Receipt Printer Operating Manual
13 14
6.2 Connection of Parallel port (if your choose to use parallel port)
1. Open the Printer Properties screen, and then select the "Port" item, then choose the
“LTP1”, then “Apply”, just as shown below:
Return to the "General" tab, click "Print Test Page" as shown below:
If the printer prints a normal page, then it shows that the work was successful.
6.3 Bluetooth port to be used (if your printer can support bluetooth function )
1: Make sure you are using the device (such as a laptop) is Bluetooth-enabled, then
activate Bluetooth, Bluetooth started successfully, you can see the computer icon
on the bottom right of the display.
2:Power on the Bluetooth printer.
3:To add the Bluetooth printer, please left-click the - click “Add a Bluetooth
Device” , then you will enter wizard screen , please choose “My device is set up according
and ready to be found”click “Next”(showed as below).

58 mm Thermal Receipt Printer Operating Manual
15 16
7.Operating Manual for Android OS
4:if you can see screen as below,then the device is searching the bluetooth printer,please
wait.
5:Once the Bluetooth printer is found. You can see it listed on the screen, Here, for example,
Bluetooth printer is successfully found. Please click “Bluetooth printer”, click “Next”
6:Choose “Let me choose my own passkey”, then enter “1234”(this is factory default
passkey, if you want to change it, you have to inform us to set the new passkey for you in
our factory before shipping),then click “Next”.
7:if you can see the screen as below, that means the Bluetooth printer is already connected.
Please notice the assigned COM ports ,then Click”Finish”.
(Note: The Bluetooth device will automatically assign a COM port.)
8: Now if you want to test if the printer is OK to print, you could use a com tool , and send
printed data to Outgoing COM port( just as above image shown: COM5).
(Com tool setting is 9600,N,8,1.)
This manual applies to all of our android OS compatible printers ( both 58mm & 80mm
width printer) Currently, the common communication ports we used for android OS are ( USB
、Ethernet、Bluetooth and WiFi )
If you want to use Android Device connected with our printer, first of all make sure that
printers can be supported Android Operate System, proceed as follows ( Bluetooth as example):
Step 1:
- Insert the CD driver disc into the CD-ROM, connect your Android device with your
computer;