Zling Studio Z-cyber User manual

P.
2
Welcome
Thank you for purchasing Zling Studio. This User’s Manual provides
detailed instructions and illustrations to help you enjoy this multi-functional
portable media player. Please read the manual carefully before you start to
operate it.
Features
Video Display :3.6” TFT LCD
Video Playback
:ASF Format(320x240) at 30fps
Video Formats :ASF, AVI, VOB, DAT, WMV, MPEG, MOV**
Video Recording
:320x240(ASF format)
Voice Recording
:MP3
Audio Playback
:MP3(8Kbps - 320Kbps) / WMA(24Kbps - 28Kbps)
Equalizer :Flat/Rock/Pop/Jazz/Classic/Dance/Heavy/Disco/
Soft/Live/Hall
ID3 Tag
:ID3v1
Photo Display
:JPG format
Video Out
:NTSC / PAL
Speaker
:Built-in
Memory Support
:Built-in memory + External SD / MMC Cards
Battery
:Li-Polymer rechargeable
Output Power
Output Power Output Power
:5mW+5mW at 32 ohm
Frequency Response
:20Hz-20kHz
Signal to Noise Ratio :>85dB
USB Interface
:USB 2.0 Full Speed
Supported OS
:Windows ME / 2000 / XP (no driver required)
Windows 98SE (driver required)
Physical Size
:101mm(L) x 71mm(H) x16mm(D)
Weight
:120g
** Transcoder software is included for converting different file extensions
into ASF format.
All specifications are subject to change without notice.

P.
3
Minimum System Requirement

Windows 98SE, Windows ME, Windows 2000 and Windows XP

One available USB Port

CD ROM drive required for driver installation (Windows 98SE only)

Windows Media Player 9 and Direct X 9.0c or above is required for
video conversion software
Important notes before you begin
1. Do not operate the device under extreme temperature
condition. The best working temperature is 0C – 40C.
2. Avoid placing the device to direct sun light.
3. Insert the SD/MMC card ONLY when the device is turned off.
Failure to so may result in data loss or damage to the circuit.
4. Always back up your important files. The manufacturer is not
liable for any loss of data.
5. Do not connect the USB port while the device is playing media
files.
Product Illustration
Zling Studio Portable
Media Player
A. Hold Switch
B. Power
C. B Button
D. A Button
E. Menu
F. Forward
G. Play / OK
H. Backward
I. Volume Up
J. Volume Down
K. SD/MMC Card Slot
L. DC Power In
M. USB
N. AV In
O. AV Out
P. Earphones
A B C D E
K
F
G
H
I
J
P
O
N
M
L

P.
4
Quick Start!
1. Charge the player by using the bundled AC adapter. The default
charging time is 2-3 hrs. The LED will be turned on in Red while
charging. It will be off when the battery is fully charged.
2.
Use the bundled Media Conversion program to prepare your video,
music and picture files for the player. See below “Using Media
Conversion Program” section for details.
3. Press and hold POWER button to turn on the device. To turn off the
device, press and hold the POWER button for 2 seconds.
4. Connect the device to computer by via the bundled USB cable. The
“MSDC” screen will appear on the device. The computer will now
detect the device and 2 removable drives will appear. One is the
internal memory of the device and the other is the external memory
respectively.
5. Now you can drag and drop the video files or audio files to the
appropriate folders in the device. For optimal result, please use Media
Conversion Program to convert the files before copying to the player.
Using the Media Conversion Program
Your PMP Player has come with a very useful media converter that allows
you to convert Video, Music and Picture files to be played with the player.
Insert CD ROM driver and run “Setup.exe” from “Transcoder” folder. Follow
the screen instruction and proceed.

P.
5
1. Function
The PMP Transcoding Tool can convert a video file to .asf, CD Tracks to
.mp3 or an image file to .jpg.
2. Step
(1) Select the conversion mode
(2) Select audio sample rate only for Media Mode
(3) Select video quality only for Media Mode
(4) Browse and select the input file (include the full file path)
(5) Preview the input file (if you want)

P.
6
(6) Browse and select
the output file (you may write it by yourself but
include the
full file path) and designate it to the correct folder of the
player. For example,
Video files --- D:\Video
Picture files --- D:\DCIM\100MEDIA
MP3 files --- D:\MP3
** Assumed C: is your only HDD then D: will be assigned for the
device’s internal memory. And E: will be assigned to external
memory card if it is in used.
(7) Start conversion
(8) Stop conversion when converting (if you want)
(9) Play the output file when conversion ended (if you want)
(10) End program
(if you want to exit)
Now you have successfully converted the media files into the player.
To Play Video
1. In the main menu screen, select VIDEO and click “OK” to confirm
and enter.
2. In the video selection screen, select the video file that you wish to
play and press “OK” to start playing. To pause the video, simply
press “OK” button again.
3. To display the video file information, select the video file and press
“B” button in the video selection screen.
4. Press “UP” and “Down” button to control the volume up/down.
5. To exit the current section, press the “MENU” button.

P.
7
To Play Audio
1. In the main menu screen, select AUDIO and click “OK” to confirm
and enter.
2. In the audio selection screen, press “B” button to cycle through
repeat once, repeat all and random play settings.
3.
Select the audio file that you wish to play and press “OK” to start
playing.
4. During audio playback, press “B” button to cycle through various EQ
settings.
5.
Press “A” button to set A/B repeat.
6. To exit the current section, press the “MENU” button.
To Display Pictures
1. In the main menu screen, select PHOTO and click “OK” to confirm
and enter.
2. In the Picture selection screen, select the picture file that you wish
to display and press “OK” to start.
3.
The player supports “Picture Bridge” function.** In the full screen
picture display, press “B” to bring up the Printing menu. Select
either 3R, 4R or print default and click “OK” to execute.
4. During the full screen picture display, press “A” button to set the
picture as boot up screen.
5.
Press “UP” and “DOWN” buttons to zoom in/out of the picture. And
press
OK” to enable navigation mode. You can then press <<, >>, UP
and DOWN” to navigate the picture.

P.
8
6. To exit the current section, press the “MENU” button.
** Your printer needs to support Picture Bridge function.
To delete a file
-
Under Video, Audio or Photo main selection screen,
simply press button B. The delete menu will appear with options of:->
Cancel -> Delete Current -> Delete All.
Recording
The device is capable of recording your favorite TV program into MPEG 4
format. It can also record voice via its microphone and record audio signal
only via AV in.
AV in(video & audio)
– In the main menu screen, select RECORD and
press “OK” to confirm and enter.
1. Select “Av in” and press “OK”.
2. Plug in the bundled AV cable to the device and connect the RCA
connectors to your video device (For example TV).
3. Press “OK” to start recording. The yellow icon on the upper
left corner will start blinking to red to indicate the recording is in
progress.
4. Press “OK” again to stop a recording.
Mic only(audio)
1. Select “Mic Only” and press “OK”.
2. Press “OK” to start recording. The time meter will appear to
indicate the recording is in progress.
3. Press “OK” again to stop a recording.

P.
9
Line in(audio only)
.
1. Select “Audio Only” and press “OK”.
2. Press “OK” to start recording. The time meter will appear to
indicate the recording is in progress.
3. Press “OK” again to stop a recording.
Press “Menu” button to exist the current section.
Note:
•
It is recommended that the volume of the audio source to be
adjusted to its louder level to achieve the optimal recording result.
Scheduled Recording
The device is able to perform scheduled recording function by setting the
internal recording timer.
1.
Go to Setup menu and press “OK”.
2.
Select “OnTimeRec” and press “OK”.
3.
Switch to “ON” by pressing “Up” button.
4.
Set “Hour” and “Min” for which you wish the player to start recording
automatically.
5.
In the “Length” section, set how many minutes you wish the player
to record. And click “OK” to confirm.
6.
Press “Menu” button to exist. The player’s timer is now on and will
start recording automatically based on your scheduled setting.
Note: It is highly recommended that the player is connected to AC
power in order to avoid battery runs out.

P.
10
Setup
Time
– Set the Year, Month, Day and Time for the internal real time clock.
Scheduled Recording
– Schedule the time to start a recording and the
video length to record.
Alarm Clock
– Set the time to sound. The alarm clock will sound even if
the player is turned off.
Key Tones
– Turn the internal speaker on or off. The earphone audio
output will be turned off if the Key Tone is on.
Be sure to turn off the Key
Tone if you want hear from the earphones
Storage
– Set to use either Nandflash or external memory card.
Format
– Set to format the memory. Important! All data will be lost after
formatting.
Auto Off
– Set the time to automatically power off after certain period of
Auto Off – Set the time to automatically power off after certain period of Auto Off
idle.
Language
– Available in English, Traditional Chinese, Simplified Chinese,
Spanish, Portuguese, Italian, German and France.
Time
Scheduled
Recording
Alarm Clock
Key Tones
Storage
Format
Auto Off
Language
Default
TV_Out