ZLINK ZL-WS-100 User manual

WS-100
English
Size: 5cm x 10 cm, total: 20cm x 30cm (H)
WS-100
In Wall Switch
with other Z-Wave
INTRODUCTION
FEATURES
Manual Reset
BASIC OPERATION
Step 3
IMPORTANT: WS-100 requires LINE, NEUTRAL and LOAD wires for every installa�on
Traveler
Neutral
(White)
wire hole
WARNING! RISK OF SHOCK! Make sure power is OFF in the circuit before wiring!
Step 1
SETUP
Step 2
1
2
3
5
2. Neutral - White
5.
Gang Box
Step 4
Step 5
Wiring Informa�on
Making Connec�ons
Screw terminal Hole
Neutral
(White)
terminal.
1
2
35
Neutral
(White)
1
2
Traveler
3 5
1
2
3
5
The Traveler terminal is not
tape on the Traveler
Please refer to WA-100 user manual for
Hot
Neutral
Neutral
Line
Traveler
Hot
Neutral Neutral
Neutral
Line
Traveler Traveler
WA-100
Connecng Things That Maer

WS-100
English
Size: 5cm x 10 cm, total: 20cm x 30cm (H)
Associa�on:
ADVANCED CONFIGURATION
SPECIFICATIONS
WARRANTY
FCC ID: 2ABWCWS100
Scene and Central Scene
Interoperability with Z-Wave devices
IC: 11786A-WS100
suivantes :
#
3 0 1
the rocker
0 1
Descrip�on
Parameters
Values Default Bytes
ZL-WS-100
Input power
temperature
FOR INDOOR USE ONLY
IMPORTANT
Your Z-Wave device has a unique Device
Specific Key (DSK) on the product and packaging that is
required to add or re-add the device to a network with a
controller supporting Security 2 (S2). Be sure to save the
DSK code for each device and store in a safe place. Do not
remove the DSK from the product. Take a photo of the full
DSK code on the packaging or write the full code here:
Installation Date:
Device Location:
Other ZLINK Switch manuals
Popular Switch manuals by other brands

Cisco
Cisco Nexus 9808 Hardware installation guide

Lutron Electronics
Lutron Electronics Aviena AN-1PS quick guide

Altuscn
Altuscn ALTUSCN KHO116 specification

NewTek
NewTek TRICASTER ADVANCED EDITION 3 MINI HD-4SDI quick start guide

UTEPO
UTEPO UTP1-SW0401-TP60 user manual

Broadcast Tools
Broadcast Tools SS 4.1 Plus Installation and operation manual