ZMODO CM-Z2212GY User manual

Outdoor IR Speed Dome PTZ Camera User’s Guide
CM-Z2212GY
1201-1205, Sangda Mansion, High Technology Park,
ShenZhen, Guangdong, China
Fax: Tel: [phone] 0755-3363-1639

1201-1205 ,Sangda Mansion, High Technology Park,
ShenZhen, Guangdong, China
Fax: Tel: [phone] 0755-3363-1639
SAFETY PRECAUTIONS
CAUTION
1. Do not drop objects on the product or apply strong
shock to it. Keep away from a location subject to
excessive vibration or magnetic interference.
2. Do not install in a location subject to high
temperature (over 120F), low temperature (below
-5F), or high humidity. Doing so may cause fire or
electric shock.
3. If you want to relocate the already installed
product, be sure to turn off the power and then
move or reinstall it.
4. Remove the power plug from the outlet when then
there is a lightning. Neglecting to do so may cause
fire or damage to the product.
5. Keep out of direct sunlight and heat radiation
sources. It may cause fire.
6. Install it in a place with good ventilation.
7. Avoid aiming the camera directly towards
extremely bright objects such as sun, as this may
damage the CCD image sensor.
8. Apparatus shall not be exposed to dripping or
splashing and no objects filled with liquids, such as
vases, shall be placed on the apparatus.
9. The Mains plug is used as a disconnect device and
shall stay readily operable at any time.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE REAR COVER. NO USER SERVICEABLE PARTS
INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN
This symbol indicates high voltage is present inside. It is
dangerous to make any kind of contact with any inside part
of this product.
This symbol alerts you that important literature concerning
operation and maintenance has been included with this
product.
WARNING
1. Be sure to use only the standard adapter that is
specified in the specification sheet. Using any
other adapter could cause fire, electrical shock, or
damage to the product
2. Incorrectly connecting the power supply or
replacing battery may cause explosion, fire,
electric shock, or damage to the product.
3. Do not connect multiple cameras to a single
adapter. Exceeding the capacity may cause
abnormal heat generation or fire.
4. Securely plug the power cord into the power
receptacle. Insecure connection may cause fire.
5. When installing the camera, fasten it securely and
firmly. A falling camera may cause personal injury
6. Do not place conductive objects (e.g.screwdrivers,
coins, metal things, etc.) or containers filled with
water on top of the camera. Doing so may cause
personal injury due to fire, electric shock, or falling
objects.
7. Do not install the unit in humid, dusty, or sooty
locations. Doing so may cause fire or electric
shock.
8. If any unusual smells or smoke come from the unit,
stop using the product. In such case, immediately
disconnect the power source and contact the
service center. Continued use in such a condition
may cause fire or electric shock.
9. If this product fails to operate normally, contact the
nearest service center. Never attempt to modify
this product in any way. (ZMODO is not liable for
problems caused by unauthorized modifications or
attempted repair.)
10. When cleaning, do not spray water directly onto
parts of the product. Doing so may cause fire or
electric shock.
1

PRODUCT OVERVIEW
Product Overview
Main Features
1/4" Sony Super HAD Color CCD Image Sensor
420 TV Lines, Horizontal
4~88mm Vari-focal Lens
Signal: NTSC
Weatherproof
IR Night Vision Distance: 260’ (80m)
Minimum Illumination: 0Lux (12 LEDs)
22X Optical Zoom and 10X Digital Zoom
Pan Rotation: 0°~360° (Endless)
Tilt Rotation: Auto Flip180°
PT Speed: Pan: 0.5~350°/sec,Tilt:0~90°/sec
128 Presets
Communication: Rs485
Protocols: PELCO-D, PELCO-P
Video Connector: BNC
Power Connector: RCA12V DC, 3A
It is a economical, PTZ Dome camera, with a
performance of 22X Optical Zoom and 10X Digital
Zoom and 420 TV Lines of Horizontal Resolution.
Also with functions such as 128 preset positions,
full 360° of endless pan, auto flip 180° of tilt rotation
and weatherproof, it offers exceptional performance
at an affordable price. This constant dome camera
will provide the user with all the basic functions needed
for surveillance, such as low-light sensitivity of 0Lux,
Day & Night auto switch, 360°pan rotation and 360°tilt
rotation and built-in housing. It will provide crisp and
clear images, indoors and especially outdoors, 24
hours a day.
1) CM-Z2212GY Weatherproof IR PTZ Camera
1) Mount Bracket
1) Cable
1) 12V DC Power Supply
4) Screws
1) Package Box
Package includes
Please check your camera and accessories
included in the package. Those components are
as shown below:
Camera Mount Bracket
Screws
WWW.ZMODO.COM
CCD CAMERA
CCD CAME RA
WWW.ZMODO.COM
CCD CAMERA
Package Box
2
1201-1205 ,Sangda Mansion, High Technology Park,
ShenZhen, Guangdong, China
Fax: Tel: [phone] 0755-3363-1639
Power & Cables

SCHEMATIC DIAGRAM
3
1201-1205 ,Sangda Mansion, High Technology Park,
ShenZhen, Guangdong, China
Fax: Tel: [phone] 0755-3363-1639
Main Body
1
Ceiling Mounting
2
Lens
4
3
LEDs

CONNECTING CABLES
4
To connect cables
1. Connect the BNC cable to the video connector attached on your camera
2. Connect the BNC cable to the Video Input on a DVR or Video Balun.
3. Connect the power adapter to the RCA Power connector attached on your camera. And then connect the
power adapter to a power source nearby.
4. Run an 18 gauge power wire for the RS-485 (Control Wire) and connect it to the DVR and the Camera
using the above guide.
It is very important that you identify these ends before installing the cable so that you have the correct
ends at the correct location.
Note
1201-1205 ,Sangda Mansion, High Technology Park,
ShenZhen, Guangdong, China
Fax: Tel: [phone] 0755-3363-1639
BNC Cable
RCA Cable
DVR
Video Balun
- [phone]
RS 48 5 SENSO R AL AR AM
Connect to DVR RS-485
18 Gauge Power Wire
RS-485 Wire
Orange = Positive
Yellow = Negative

Go through the short cable that
come with the Main Body from the
Wall Mount Bracket. Fix the Mount
Bracket on the wall with the screws
supplied in the package using a
screwdriver.
1
step
HOW TO INSTALL
5
1201-1205 ,Sangda Mansion, High Technology Park,
ShenZhen, Guangdong, China
Fax: Tel: [phone] 0755-3363-1639
Before installation
Please read the following instructions before installing your camera:
You have to check whether the location (ceiling or wall) can bear five times the weight of your
camera.
Do not allow the cable to be caught in a pinched area, otherwise the electric line cover may be
damaged. This may cause cable breakdown or fire.
When installing your camera, don't allow anyone to walk or stand under your installation site,
and remove all valuable items. A dropped camera may cause injury to bystanders or harm to
valuable items.
Installation procedure
To install your camera

HOW TO INSTALL
6
1201-1205 ,Sangda Mansion, High Technology Park,
ShenZhen, Guangdong, China
Fax: Tel: [phone] 0755-3363-1639
Attach the Main Body to the Mount
Bracket by twisting the screws
into the three holes using a screwdriver.
2
step
You can also install the camera on the
ceiling. The same as before, go through
the short cable supplied in the package
from the Ceiling Mount Bracket. Fix the
Mount Bracket onto the ceiling with the
screws supplied in the package. And then
attach the Main Body to the Mount Bracket.
But we do not offer ceiling Mount Bracket in
this package.
The camera is now installed on the
mounting location. What you need
to do next is wiring cables!
3
step
Note

CAMERA SPECIFICATION
Visible up to 260’(80m)
Lens
Outdoor Speed Dome IR PTZ Camera
DC 12V, 5A
NTSC Standard color system PAL Standard color system
(525 Lines, 60 Fields) (625 Lines, 50 Fields)
Min. 3800mA
1/4 inch SONY Super HAD Color CCD
510(H) x 492(V), 250,920 pixels
NTSC Standard PAL Standard
525 Lines 625 Lines
12 LEDs
1 Lux (Color), 0Lux (infra LED on)
Product type
Power input
Broadcast type
Power Consumption
Image device
Effective Pixels
Scanning mode
IR Lamps
Minimum illumination
IR Distance
Pan: 0.5~180°/ sec, Tilt: 0~90°/ sec
1/50 to 1/120,000
Auto Back Light Compensation
Auto Switching between Color and B&W by day and night change(D/N)
RS-485
-5F—120F
Number. of Presets
P/T Speed
Controls
Communication
Operation temperature
Specifications for NTSC & PAL Standard
7
1201-1205 ,Sangda Mansion, High Technology Park,
ShenZhen, Guangdong, China
Fax: Tel: [phone] 0755-3363-1639
Item Details
Weatherproof Yes
4~88mm Vari-Focal
128
Dome Movement
Zoom
Pan: 0°~360° (Endless), Tilt: Auto Flip 180°
Electronic Shutter
S/N Ratio > 50dB
PTZ Control PELCO-D
11.24 lbs
Weight
15.4”x 12.6"x 11.8”
Size (package)
Baud Rate 1200/2400/4800/9600 selectable
Optical: 22X Digital: 10X
Horizontal resolution 420 TV Lines

8
1201-1205 ,Sangda Mansion, High Technology Park,
ShenZhen, Guangdong, China
Fax: Tel: [phone] 0755-3363-1639
This device complies with part 15of the FCC
Rules. Operation is subject to the following
two conditions:
1) This device may not cause harmful
interference.
2) This device must accept any interference
received including interference that may cause
undesired operation.
This equipment has been tested and found to
comply with the limits for a Class A digital device,
pursuant to part 1 5 of FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference when the equipment
is operated in a commercial environment. This
equipment generates, uses, and can radiate
radio frequency energy and, if not installed and
used in accordance with the instruction manual,
may cause harmful interference to radio
communications. Operation of this equipment in
a residential area is likely to cause harmful
interference in which case the user will be
required to correct the interference at his own
expense.
Note
FCC Statement
(Waste Electrical & Electronic
Equipment) (Applicable in the
European Union and other
European countries with
separate collection systems)
This marking shown on the product
or its literature, indicates that it shouldnot be
disposed with other household wastes at the end of
its working life. To prevent possible harm to the
environment or human health from uncontrolled
waste disposal, please separate this from other
types of wastes and recycle it responsibly to
promote the sustainable reuse of material
resources.
Household users should contact either the retailer
where they purchased this product, or their local
government office, for details of where and how they
can take this item for environmentally safe recycling.
Business users should contact their supplier and
check the terms and conditions of the purchase
contract. This product should not be mixed with
other commercial wastes for disposal.
Correct Disposal of This Product
SKU: CM-Z2212GY
8 04 6 6 5 5 0 0 2 7 5