User’s Manual Cool Disk 2.0 V2 Portable USB Flash Disk
- 3 -
Driver Installation
A. Installation Procedure for Win 98 / 98se
1. Do NOT plug in the Cool Disk 2.0 V2.
2. Insert CD driver disc and run “X:\cooldisk20v2\win98\Setup.exe”.(Letter “X”
refers to the CDROM drive location.)
3. Click “Start”button.
4. Plug in Cool Disk 2.0 V2 into the computer USB portand Windowswill install
the driver automatically.
5. Afterwards, in “MY COMPUTER”you will find newicon(s) “REMOVABLE
DISK”.This is the location of Cool Disk 2.0 V2.
6. Now,you are able to access all features that provided by Cool Disk 2.0 V2.
** Please also read “UTILITIES”in this installation quick reference.
B. Installation Procedure for Win Me / Win 2000 / Win XP
There is Cool Disk 2.0 V2 driver support in Win Me / Win 2000 / Win XP.After you
plug in Cool Disk 2.0 V2 Windowswillautomaticallyinstall the driver.Just follow
the simple installationprocedure, and finally,in “MY COMPUTER”youwill find a
newicon(s) “REMOVABLE DISK”.
Now,you are able to access all features that provided by Cool Disk 2.0 V2.
** Please also read “UTILITIES”in this installation quick reference.
** To “Uninstall” Cool Disk 2.0 V2, plug offfromthe USB port.
C. Write-Protect Switch (for Security partition)
1. When youpush the switch atthe “unlock”position and plug it into the computer,
the Cool Disk 2.0 V2 is configured as tworemovable drives(public partition and
security partition)
*** For Windows 2000, you need to install service pack 3 to recognize both disks.
2. When you push the switch at the “lock”position and plug it into the computer, the
Cool Disk 2.0 V2 is configured as single removable drive (public partition). The
securitypartition is hidden and it cannot be accessed until you push backthe
switch at the “unlock”position and re-plug it again into the computer.
