Zontos 750 User manual

Z on t os
AD V ANCED IONIZED W ATER S Y S TEM
Model 7 5 0
Living water.
SEVEN PLATINUM/
TIT ANIUM-C O ATED PLA TES
USER
MAN UAL

Alkali
W a t
USER
MAN U AL

User Manual
www.z
ont
os.us
er Ioni z er
1 Directions . . . . . . . . . . . . . . . . . . . . . . . . 0 2
1-1 Directions for Ins tallation
1-2 Directions for Saf ety
1-3 Directions for Use
> Precautions for Drinking
> Directions for Appliance Use
2
Product Information . . . . . . . . . . . . . . . 05
2- 1 Outline of the Applianc e
2-2 Composition of the Pr oduct
2-3 Part Names and Functions
> The Main Body
> LCD and the Touch Panel
3 Howto Use . . . . . . . . . . . . . . . . . . . . . . . 09
3- 1 Howto Use
3-2 Directions for Use
3-3 Malfunctions and C orrections
01
4 How to Utilize. . . . . . . . . . . . . . . . . . . . . . 1 2
4- 1 Howto Drink Alkali W a t e r
4-2 Applications for Acidic W a t e r
4-3 Application for Purified W a t e r
5 Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 5
5- 1 Whento Replacethe Filt er
5-2 Howto Replace the Filt er
6 Product Specifications . . . . . . . . . . . . . . 1 6
7 Quality Assurance . . . . . . . . . . . . . . . . . . 1 7

1
Zontos Model
7
5
0
Advanced Ionized Water
Sy
s
t
em
Dir ections
1-1 DIRECTIONS FOR
INS T ALLATION
Don’t let the outer tube curv e
or be pressed by the main
body .
Please keep the product away
from fi r e , mois tur e , and oil.
Install the product higher than
the faucet for easy water fl ow .
02
Do not raise the acidic w a t er-
releasing hose higher than the
machine .
Neverput the product on an
unlevel surf ac e . Please keep the
product on a level surf ac e .
Do not install it more than
one meter (3 feet) away fr om
the dr ain.
• Please check the power voltage before connecting the power cord because this product is only for 110
volts, 1 amp , 50-60 Hz, and 120 W .
• Do not installthis product in a place where there is direct sunlight or where the temperature is below 0°C
(32°F),as this may cause deforma tion.
• Be sure you turn off the tap before the installation. And the main body should be connected to cold w a t e r .
(Connectingto hot water may cause product f ailur e . )
• Please installthe acid tube lower than the main body . If the tube is long or higher than the main body , the
water taste can change , because the ion creation will be affected. (At the installation, make sure the acidic-
water hose is not bent or pres sed.)
• Do not put the product near fi r e , as this may cause product def ormation.
• Neverdisassemble the product arbitr arily , as this may cause a malfunction or a safety ac cident.
• Maximuminlet water pressure is 50 psi; minimuminlet water pressure is 4.4 psi.

User Manual
www.z
ont
os.us
1-2 DIRECTIONS FOR
S AFETY
This is
to prevent possible danger by notifyingconsumers of damage (physical or property damage) r elat ed
t o safety issues resulted from misuse or use for other purposes, Please read the instructions carefully to use it
c orrectly .
(The product may cause) Electric shocks, leaks or fi re
• This appliance can be used with 110 volts alternating current only .
• Use it after cleaning dirt or foreign substances off of the power plug.
• Do not use it when the power cord is damaged or shaking.
• Whenyou insert the power cord into the outlet or pull it out, be sure your hands are dry .
• Do not bend, tie, or pull out the power cord by f o r c e .
• Do not attempt to disassemble or repair the pr oduct.
Causes of Product Failure or Damage
• Do not installthe product in the place where it is humidas in bathrooms, shower rooms, or outdoors or f or
eavesdrops or raindropsthat the product may get wet.
03
• Do not put heavyobjects on the pr oduct.
• Install it on a solidand level surf ac e .
• Be sure to connect the product withthe cold water pipe .
• Do not move the product while it is w orking.
• Do not apply seriousimpact to the pr oduct.
Causesof L eakage
• Makesure not to twist or bend the water supplyhose .
Causes of Product Damage Resulted from Discoloration or Peeling
• In cleaningthe product, do not use thinner , benzene or w ax.
Deformation of Product Appearanc e
• Avoidopen flame or direct sunlight.