Zorlu ADX-6004 User manual

COOKER HOOD
USER MANUAL

2
r product.

3

45
1
2
3
2
5
0
2
6
2
20
400
2080
Min695Max975
500
40
5
0
0
5
9
8
,8
9
8
100
4
1
2 External chimney
3. Control panel
4. Cooker lighting
5.Aleminum cassette filter
Internal chimney
INTRODUCTION OF DEVICE
ADX-6004
ADX-9004
MODELS

*This product is designed for usage at
home.
*Your products usage voltage is 220-240
Volts~50Hz
*Grounded plug is used at your product's
electric network cable. This cable should
definitely be plugged in a grounded
socket.
*All electrical networks should be set by
a qualified electrician.
*Installation applied by unauthorized
people may cause the product to operate
at low performance, damage of the
product and accidents.
*Power supply cable should not be
exposed to press or smash during
montage. Network cordon should not be
placed near the cookers; it may cause
fire if it melts.
*Do not plug into the socket before
installation of the product is completed.
*Keep the plug at a reachable place so
that you can unplug it in case of any
danger.
*Do not touch the lamps when they are
on for long time. Lamps may hurt your
hand as they will be hot.
*Kitchen cooker hoods are designed for
usage during normal and home-style
cooking. If it is used for other purposes,
failure risk occurs and it will be out of
warranty.
*Follow applicable rules and directions
for passing out outlet air. (This warning is
not valid for usage without chimney.)
*Flaming foods should not be cooked
under the product.
*Start your product after you put pot,
fry-pan etc. on the hob. Otherwise
high temperature may cause some
parts of your product to get
deformed.
*Before you take pot, fry-pan etc.
from the hob, put their lids on.
*Do not leave hot oil on the hob. Pots
that have hot oil in them may cause
self-ignition.
*Pay attention to curtains and covers
during cooking of meals like frying
because oil may flare up.
*Make sure that filters are changed in
convenience. Filters that are not
changed at appropriate time has risk
of causing fire due to oil that will be
gathered on them.
*Do not use filter materials that are
not flame resistant instead of filter.
*Do not operate your product without
aluminum filter; do not remove filters
when the product is on.
*In case of flame, cut power of the
product and the cooking appliances.
(Cut power of the product by plugging
it off the socket).
*Your product may cause fire risk if
cleaning is not applied periodically.
*Cut power of the product before
maintenance process. (Cut power of
the device by unplugging it)
5
WARNINGS AND SAFETY PRECAUTIONS

*When chimney hood and the
appliances working with energy other
than electricity are operated at the
same time, negative pressure in the
room should not be more than
4 Pa (4 x 10 bar)
*If there is an appliance working with
fuel or gaseous fuel at the same place
with your hood, this appliance's exhaust
should be isolated from its volume
totally and the appliance should be
hermetic type.
*When chimney connection is applied to
your product, use ducts of 150mm or
120mm diameter. Duct connection
should be as short as possible and
should include few bends.
*Keep package materials away from
children as they may be dangerous for
them.
*Be sure that your child does not play
with the product. Do not allow kids to
use your product.
*If power supply cable is damaged,
this cable should be changed by its
producer or its service agency or a
personnel who is a specialist at the
same level in order to prevent a
dangerous situation.
*In case of flame, cut power of the
cooker hood and the cooking
appliances, cover the flame. Never
use water in order to extinguish it.
Use “MAX 6 A” fuse at cooker hood
installment for your security.
Warning about Transportation and Carriage
*All the materials used at package of your product are suitable for recycling.
*Please comply with the signs on the product's box during transportation.
*Hold the holders placed at sides of the box in order to carry your product.
If you need transportation;
*Keep the original box.
*Carry your product in its original box; comply with the carrying signs on the
product's box.
If there is no original package;
*Do not put heavy material on the chimney hood.
*Keep the external surface from bash.
*Pack your product to avoid damages.
-5
6

If the product does not work:
Before you contact the technical service:
Make sure that the product is plugged in and the electric fuse of the electric
wiring is running. Do not take any action that will damage the product. Before
you contact with technical service, check your cooker hood according to Table 2.
If the problem goes on, contact the seller or the most authorized service.
Check electric connection
Check lamp switch
Cooker-hood does not work
Illumination Lamp does
Cooker-hoods air suction
Cooker-hood does not
Check motor switch
Check aluminum filter (Aluminum Cassette Filter should be washed once a month at normal conditions.)
Check lamps (Lamps should be firm.)
Check outlet (Outlet should be open)
Check Carbon Filter (Carbon filter should be replaced with a new one each 2-3 months at the models with Carbon Filter at normal conditions)
X
X
X
X
X
X
X
X X
X
not work
is weak
direct air out
(at places without
chimney)
(Voltage of the electric network should
be between 220-240V, cooker hood should
be connected to grounded plug.)
(Motor switch should be at on position)
(Lamp switch should be at on position)
Table 2
7

8
3
Figure 5
USAGE
Remove protective foil on your inox product after installation.
Speed Selection The product has 3 ventilation speed choice. Ventilation speed is
selected in accordance with steam of cooking or fry. You may switch on your
product by pressing control buttons on the front panel.
Automatic timer (TIMER) is available at all models with electronic control. When
pressed on any of the motor control buttons for more than 2 seconds, timer
function will be set for 15 minutes. When the timer is on, Display will signal and the
motor will be off automatically in 15 minutes. Please use the cooker and the
product at the same time to enable air circulation. This will have positive effect on
air suction power. We recommend you to operate your product for few minutes
more after the cooking is completed to enable absorption rest of smell and steam.
TOUCH BUTTON POSITIONS
Illumination
The product has 2 lamps and one lamp button to operate illumination. Press
lamp button in order to start illumination.

Motor Step Lamp
on/off
Motor
on/off
Cleaning Periods of Aluminum Filter
Filter should be cleaned when “C” signal appears on the Display or each 2-3
weeks (in accordance with the usage frequency). After cleaning and replacing
filters to their places, button should be pressed for more than 3 seconds
(when the product is off) in order to remove the “C” signal. “E” signal will
appear on Display and product will start working at normal position. If you want
to continue using your product without removing “C” signal, active speed will
appear for 1 second when you press button, then “C” signal will appear
once more and the motor will continue operating.
NOTE: “C” signal will appear after you use the product for 60 hours.
9

Picture 19
Picture 18
VEfficient Ventilation
In order to ensure correct ventilation, keep your kitchen windows closed.
IMPORTANT NOTE
Please pay attention when the product is operated at the same time with a product
which operates using air and fuel (for instance; heater, water heater etc. which
operates using gas, diesel fuel, coal or wood), since cooker hood may affect
burning negatively as it directs the air out.
This warning is not valid for usage without chimney.
10
MAINTENANCE
*Disconnect electricity connection before
maintenance and cleaning process.
*Aluminum cassette filter holds the dust and the
oil in the air.
*Metal filter should be washed once in a month
with hot and soaped water or, if possible, at
dishwasher (55C).
*Take off aluminum cassette filter pressing on
springy latches on end point. After cleaning, do
not replace before it dries.
*Outer surface of the cooker hood should be
wiped with a wet cloth that is wetted with water or
alcohol.
*Please avoid contact of electronic parts with
water or similar materials.
*Using Inox cleaning and maintenance products
available in the market will help your product to
perform longer.
Warning: Aluminum filters may be washed in the
dishwasher. Color of aluminum filters may change
after several washings. This is normal and it is not
necessary to change the filters.umdur ve filtrelerin
deðiþtirilmesini gerektirmez.
Washable Aluminum
Cassette Filter

Functions of the Product
Your hood is compatible for use with our without chimney.
Usage with chimney
The product should be connected to a chimney that will direct the air out during usage with
chimney. In order to achieve best performance, pay attention that the duct system follows the
shortest way for connection to the chimney. Your product is produced as it will be appropriate for
usage with chimney.
Attention!!!
Outlet of the product should not be connected to air canals that have other smoke as well.
Active Carbon Filter
To provide air recirculation where product's chimney air outlet cannot be connected to exterior,
it is necessary to use active carbon filter with your product. You may purchase this accessory
from authorized sellers and after sales services
Carbon Filter Usage
Your product is compatible with two types of carbon filters.
You may see following information on how to use carbon filters.
Before installing or replacing carbon filter, first you should cut your product's power off.Carbon
filters should be replaced with a new one each 3-5 months because it is used at kitchens that does
not have chimney outlet.
Carbon filter should never be washed.
Grease filters should be installed on the product even when carbon filter is not in use. Do not use
your product without grease filter.
Replacing Carbon Filter
It is necessary to install 2 carbon filters to your product.
To place the carbon filter, place your filter on connection channels on motor and turn it clockwise.In
order to remove filter, turn it anti-clockwise. Figure 17
Figure 17
11

Replacing the Lamps
Cut off the connection of the cooker hood with electricity.
Take off the aluminum cassette filter. Take off the failed
lamp and replace it with a new one that is of the same
rating. (Please wait for the lamps to cool as they might
hurt your hand.)
Replacing 50W Halogen Lamp
In order to change halogen lamps, take the lamp
downwards pushing back of lamp holder downwards and
then turning it a little bit anti-clockwise take it off
downwards.Figure 3
Figure 3
Standard Accessories
Plastic Outlet (Figure 1)
Plastic outlet mounted to air outlet of the cooker hood
Place of the Product:
After installation of your product, distance between
range hood and electrical hob should be at least 65
cm and gas hobs at least 75cm. Figure 2
Installation, taking off your product from its package:
*Check if there is any deformation on your product.
*Transportation damages and failures should immediately be reported to the transportation
responsible.
*If you notice any damage please report to the seller.
*Do not allow children to play with packing material!!!
Installing Hanging Bar
There are 2 L shaped hanging bars in to install your product,
provided with screws. Fix bars on product body via M5 x 35
screws into M5 turn screws (Figure 3).
Figure 1
12

C
17
12
38
34
336,5±1
298
204
259
620
460,5
B
A
170
A,B,C = Ø8
336,5
Drilling hanging holes
Stick montage template on the place
that chimney hood will be placed. Drill
holes via Ø8 mm driller on A,B,C,D
points. Taking min. and max. height
as reference, drill hole via ø 6mm
driller to screw chimney montage
plate. Figure 2
Chimney hood is hang on the wall through 2 hanging
plates in (L) shape. These plates are provided with screw
set for ease of packing. Before you hang the product on
the wall, screw these plates to M5 turnscrew with M5 x 40
capscrews. Picture 5
Picture 5
Installation of plastic chimney to chimney hood
Fix plastic chimney to motor connection plate with 3,5 x
9,5 screw. Picture 6
Picture 6
H670.1000.01
min.650-max.750mm min.750-max.800mm
ELECTRO GAS
Figure 2
Nailing dowels
Nail ø8mm dowels on (A,B,C) drilled holes for hanging
screw. Nail 2 6mm dowels into ø6mm drilled holes for
chimney installation plate. Picture 7
Picture 7
13

Screw chimney installation plate to ø6 dowels nailed on the
wall with 3,9 x 22 screws. Picture 8
Picture 8
Hanging screws
Screw hanging plugs with 5,5 x 45 screws to ø8mm dowels
(A,B). Distance between screw head and wall should be
5mm. Picture 9
Picture 9
AB
Hanging the Chimney Hood ojn the Wall
Hold the hood on its body and hang it on the wall to A and
B points through (L) plates installed to the hood
previously. Picture 10
When hanging process is completed, thighten the
hanging screws placed on the wall as shown on Picture
9in order to prevent hood from moving. Picture 11
Picture 11
When your hood is completely thightened, fix it on
the wall passing a screw through hole (C ) on the
body in order to prevent hood's movement.Picture
12
Picture 12
Picture 10
14

Picture 14
Installation of aluminum flexible duct
Fix aluminum flexible duct to product's plastic chimney.
Fix the other end to the chimney hole on the wall.
Picture 14
NOTE: If your hood is montaged inclined, loosen M5
screws on which hanging plates on the top are installed.
Picture 13
As bends and ells will result in decrease in suction power, avoid using them as
much as possible. Picture 15
Incorrect
Resim 15
Fix the chimney over the body. Picture 16
Picture 16
Resim 13Picture 17
Screw internal chimney to chimney installation plate
fixed on the wall through its outer top ends. Picture 17
Picture 15
Correct
15

Model
220-240 V 50Hz
210 W
1
2
3
220
320
F
CLASS I
500
2 x 50 W
220
320
420
Table 1
Feeding Voltage
Lamp Power (W)
Motor Power (W)
Flow Capacity
(m3/h)
S
P
E
E
D
Isolation Class
Motor Isolation Class
185 W
16
TECHNICAL SPECIFICATIONS
In order to use the cooker hood efficiently;
*Use ducts of 150/120mm diameter and as few bends as possible when you
make the chimney connection.
*Pay attention to aluminum filters' cleaning periods and changing periods of
carbon filters.
*Use the product at middle speed if high suction power is not necessary.
* In order to ensure that ventilation occurs correctly, windows of the kitchen
should be kept closed.
ADX-6004/ADX-9004

17

18

19