ZORO EB-FS-YB-110 Instructions for use

OPERATING
INSTRUCTIONS
&
PARTS MANUAL
(OIPM)
Expandable Barrier
EB-FS-YB-110

Parts List
Product diagrams
Methods of use：
Method 1 - Use alone
Step 1: Unpack the product and remove the product and the caster base. Place the
retractable guard on a table with a certain height for installation.
Step 2: Secure the feet using the holes in the bar and tighten with screws to ensure they
do not come loose. It is then ready to be placed on the floor for use.
Method 2 - Mount on the wall for fixed use
Step 1: Same as method 1
Step 2: same as method 1
Step 3: Place the telescopic fence in the desired position and remove the U-shaped
fittings and connectors from the accessory bag.
Step 4: Attach the clips on the side posts to the wall fixings and place them in the
desired position, then drill the holes. Place the expansion screws into the holes and fix
the wall fitting to the wall so that it is inserted into the U-shaped fitting.
Method 3 - Connecting two products for use
Step 1: Same as method 1
Step 2: same as method 1
Step 3: Place the two sets of telescopic guards in the correct position and place the
connectors into the U-shaped fittings to complete the connection. (*Note: this product
can be connected without restriction)
Caution: Keep hands and fingers out of moving diamonds of web when handling gate.