Zte MF97B T Series User manual

1
MF97B_T
User Manual

2
LEGAL INFORMATION
Copyright © 2014 ZTE CORPORATION.
All rights reserved.
No part of this publication may be quoted, reproduced, translated or used in
any form or by any means, electronic or mechanical, including photocopying
and microfilm, without the prior written permission of ZTE Corporation.
Notice
ZTE Corporation reserves the right to make modifications on print errors or
update specifications in this guide without prior notice.
We offer self-service for our smart terminal device users. Please visit the
ZTE official website (at www.ztedevice.com) for more information on
self-service and supported product models. Information on the website
takes precedence.
Disclaimer
ZTE Corporation expressly disclaims any liability for faults and damages
caused by unauthorized modifications of the software.
Images and screenshots used in this guide may differ from the actual
product. Content in this guide may differ from the actual product or
software.
Trademarks
ZTE and the ZTE logos are trademarks of the ZTE Corporation.

3
Google and Android are trademarks of Google, Inc.
The Bluetooth®trademark and logos are owned by the Bluetooth SIG, Inc.
and any use of such trademarks by ZTE Corporation is under license.
microSDHC Logo is a trademark of SD-3C, LLC.
Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio,
and the double-D symbol are trademarks of Dolby Laboratories.
Qualcomm® Snapdragon™ processors are products of Qualcomm
Technologies, Inc.
Qualcomm and Snapdragon are trademarks of Qualcomm Incorporated,
registered in the United States and other countries. Used with permission.
Other trademarks and trade names are the property of their respective
owners.
Version No.: R1.0
Edition Time: November 14, 2014

4
Manual No.:
Getting to Know Your MF97B_T
Projection
Lens
Focus Sensor
Touch Screen
Home Key
Menu Key
Back Key
Power Key
Volume Up
Main
Microphone
Volume
Down

5
USB Port
Auxiliary
Microphone
HDMI Port
Power Socket
micro-SIM
Card Slot
Headset
Jack
microSDHC
Card Slot
Ventilation
Port

6
Projection Lens
Project the display on a surface.
WARNING!
Do not look directly into the projection lens or point the lens toward people
or animals’ eyes when the projector is on as this may cause injury to the
Kickstand
Speaker

7
eyes.
Focus Sensor
Analyze the clarity of the projected image in order for the projector to adjust
its focus automatically.
Back Key
Touch to go to the previous screen.
Home Key
Touch to return to the home screen from any application or screen.
Touch and hold to open the Google app.
Menu Key
Touch to get the options for the current screen.
Touch and hold to see recently used apps.
Power Button
Press and hold to enable or disable airplane mode, sound, or vibration,
power off or restart your MF97B_T.
Press to turn off or on the screen display.
Volume Up/Down Button
Press or hold to turn the volume up or down.

8
Main Microphone / Auxiliary Microphone
Transmit your voice. The auxiliary microphone is useful for canceling
ambient noise.
Ventilation Port
Exhaust the hot air when the projector is on.
WARNING!
Do not place anything near the ventilation holes as this may cause internal
heat buildup. Do not place your hand near the ventilation holes as this may
cause injury.
Installing the micro-SIM Card
1. Insert the end of a small paper clip or other eject tool into the hole on
the micro-SIM card tray and take the tray out of the slot.

9
2. Place the micro-SIM card on the tray as shown and carefully install the
tray back.

10
Installing the microSDHC™ Card (Not Included)
A microSDHC card can be installed or removed while MF97B_T is turned
on. You need to unmount the microSDHC card before removing it.
1. Insert the end of a small paper clip or other eject tool into the hole on
the microSDHC card tray and take the tray out of the slot.
2. Place the microSDHC card on the tray as shown. Then carefully install
the tray back.

11
NOTE:
Some applications may require a microSDHC card to work normally or
may store certain data on it. Therefore, it is recommended that you
keep a microSDHC card installed and not remove or replace it
randomly.
Charging the Battery
Your MF97B_T’s battery should have enough power for it to turn on. You
should fully charge the battery as soon as possible.
WARNING!
Use only ZTE-approved chargers and cables. The use of unapproved
accessories could damage your device or cause the battery to explode.

12
CAUTION:
Do not remove or change the built-in rechargeable battery in your device by
yourself. The battery can only be changed by ZTE or ZTE authorized
service provider.
1. Plug the AC adapter into the power socket on your MF97B_T and then
plug the AC adapter into an electrical outlet.
2. Disconnect the adapter when the battery is fully charged.
NOTE:
If the battery is extremely low, you may be unable to power on the device
even when it is being charged. In this case, try again after charging the
device for at least 20 minutes. Contact the customer service if you still

13
cannot power on the device after prolonged charging.
Powering On/Off
Ensure that the battery is charged.
Press and hold the Power Button to turn on your MF97B_T.
To turn it off, press and hold the Power Button to open the options
menu. Touch Power off and then touch OK.
Restarting Your Device
If the screen freezes or takes too long to respond, try pressing and holding
the Power Key for about 10 seconds to restart MF97B_T.
Waking Up Your Device
Your MF97B_T automatically goes into sleep mode when it is not in use for
some time. The display is turned off to save power and the keys are locked
to prevent accidental operations.
You can wake up your MF97B_T by turning on the display and unlocking
the keys.
1. Press the Power Key to turn the screen on.
2. Touch and hold the screen.

14
NOTE:
If you have set an unlock pattern, a PIN or a password for your device,
you’ll need to draw the pattern, or enter the PIN/password to unlock it.
Turning On/Off the Projector
You can use the projector embedded in your MF97B_T to project the
display onto large surfaces.
1. Slide down the status bar at the top of the screen.
2. Touch Project to turn the projector on or off.
Using the Touch Screen
Your MF97B_T’s touch screen enables you to control actions through a
variety of touch gestures.
Touch
When you want to type using the onscreen keyboard, select items on
the screen such as the application and settings icons, or press the
onscreen buttons, simply touch them with your finger.

15
Touch and Hold
To open the available options for an item (for example, a link in a web
page), touch and hold the item.
Swipe or Slide
To swipe or slide means to quickly drag your finger vertically or
horizontally across the screen.

16
Drag
To drag, press and hold your finger with some pressure before you
start to move your finger. While dragging, do not release your finger
until you have reached the target position.

17
Pinch
In some apps (such as Maps, browsers, and Gallery), you can zoom in
and out by placing two fingers on the screen at once and pinching them
together (to zoom out) or spreading them apart (to zoom in).

18
Rotate the screen
For most screens, you can automatically change the screen orientation
from landscape to portrait by turning the MF97B_T sideways.
Projecting a File Saved in Your MF97B_T
You can project a file stored in your MF97B_T.
1. Open the file you want to project.
2. Turn on the projector.
3. Adjust the projection distance and place the MF97B_T on a flat surface.
NOTE:
For best results, project onto a flat screen at a 90° angle to the floor.
When you want to finish the projection, turn off the projector.
Projecting an HDMI Source
You can project an HDMI source when connecting your MF97B_T to a
laptop or TV box.

19
1. Connect your MF97B_T with the laptop or TV box via the supplied
HDMI cable.
2. Turn on the projector.
3. Slide down the status bar at the top of the screen and touch HDMI.
4. Operate your laptop or TV box to select the content you want to view.
Projecting a File Saved in Your USB Flash Drive
You can project a file stored in the USB flash drive.

20
1. Connect your MF97B_T with the USB flash drive via the USB port.
2. Touch the Home Key > APPS tab > File Manager.
3. Touch USB Device to open the file you want to project.
4. Turn on the projector.
NOTE:
Before connecting your MF97B_T with the USB flash drive, slide the status
bar down to open the notification panel and ensure that the Connect to PC
option is not highlighted.