Zte SPRO User manual

1
Spro
Quick Start Guide

2
LEGAL INFORMATION
Copyright © 2014 ZTE CORPORATION.
All rights reserved.
No part of this publication may be quoted, reproduced, translated or used in
any form or by any means, electronic or mechanical, including photocopying
and microfilm, without the prior written permission of ZTE Corporation.
Notice
ZTE Corporation reserves the right to make modifications on print errors or
update specifications in this guide without prior notice.
We offer self-service for our smart terminal device users. Please visit the
ZTE official website (at www.zteusa.com) for more information on
self-service and supported product models. Information on the website
takes precedence.
Visit http://www.zteusa.com to download the user manual. Just click
Support > Manuals from the home page and then select your location,
product type, and name to search for related support information.
Disclaimer
ZTE Corporation expressly disclaims any liability for faults and damages
caused by unauthorized modifications of the software.
Images and screenshots used in this guide may differ from the actual
product.

3
Trademarks
ZTE and Spro logos are trademarks of the ZTE Corporation.
Google and Android are trademarks of Google, Inc.
The Bluetooth®trademark and logos are owned by the Bluetooth SIG, Inc.
Qualcomm®Snapdragon™ processors are products of Qualcomm
Technologies, Inc.
Qualcomm and Snapdragon are trademarks of Qualcomm Incorporated,
registered in the United States and other countries. Used with permission.
DLP is the trademark of Texas Instruments.
microSDHC Logo is a trademark of SD-3C, LLC.
is a trademark of SRS Labs, Inc. TruMedia technology is
incorporated under license from SRS Labs, Inc.
SRS TruMedia™, a feature-rich audio solution tuned specifically for mobile
devices, provides a cinema-like surround headphone performance with
deep, rich bass.

4
Other trademarks and trade names are the property of their respective
owners.
Version No.: R1.0
Edition Time: November 21, 2014
Manual No.: 079584506892

5
Getting to Know Your Spro
Projection
Lens
Touch Screen
Indicator Light
Home Key
Menu Key
Back Key
Volume Up
Key
Volume Down
Key
Sleep/Wake
Up Key
Projection
Key

6
Power Bank
Key
Power Key
microSDHC
Card Slot Cover
Reset Key
Focus Wheel
HDMI Input
Port
USB Jack
Power Socket
Headset Jack

7
Kickstand
Ventilation
Holes
Speaker

8
Projection Lens
Project the display on a surface.
WARNING!
Do not look directly into the projection lens or point the lens toward people
or animals’ eyes when the projector is on as this may cause injury to the
eyes.
Back Key
Touch to go to the previous screen.
Home Key
Touch to return to the home screen from any application or screen.
Touch and hold to see recently used apps.
Menu Key
Touch to get the options for the current screen.
Volume Up/Down Key
Touch or hold to turn the volume up or down.
Sleep/Wake Up Key
Touch to turn off or on the screen display.

9
Projection Key
Touch to turn on or off the projector.
Power Key
Press and hold to enable silent mode or silent mode with vibration,
disable silent mode, power off or restart your Spro.
Press to turn off or on the screen display.
Power Bank Key
Press and hold to turn on or off the Power Bank feature which allows you to
charge other devices through your Spro.
Reset Key
You can use the Reset Key to restart the Spro in the event when it stops
responding or won’t power off normally. Using the tip of a pen or paperclip,
press and hold the Reset Key until your Spro restarts.
Focus Wheel
Adjust the focus of the projector.
Ventilation Holes
Exhaust hot air when the projector is on.

10
WARNING!
Do not place anything near the ventilation holes as this may cause internal
heat buildup. Do not place your hand near the ventilation holes as this may
cause injury.
Installing the microSDHC™ Card (Not Included)
A microSDHC card can be installed or removed while the Spro is on.
1. Open the microSDHC card slot cover.

11
2. Hold the microSDHC card with the cut edge oriented as shown below.
The gold contact should be facing up. Push the card into the card slot
until it clicks into position.
NOTE:
Some applications may require a microSDHC card to work properly if it
stores certain data on it. Therefore, it is recommended that you keep a
microSDHC card installed and not remove or replace it unnecessarily.
3. Close the cover.

12
Removing the microSDHC™ Card
CAUTION:
To prevent damage to data stored on the microSDHC card, unmount the
card before removing it from the Spro.
1. From the home screen, touch the Menu Key, and then touch System
settings > Storage > Unmount SD card.
2. At the prompt, read the warning and touch OK to continue.
3. When the Unmount SD card menu changes to Mount SD card, you
can now safely remove the microSDHC card from the Spro.
NOTE:
To remove the microSDHC card, open the card slot cover, gently press on
the microSDHC card to release the lock, and then carefully pull the card out.
Close the card slot cover.
Charging the Battery
You should fully charge the battery before using the Spro. Out of the box
the battery should have enough power for the Spro to turn on.

13
WARNING!
Use only ZTE-approved chargers and cables. The use of unauthorized
accessories may cause damage.
CAUTION:
Do not try to remove or change the built-in rechargeable battery in your
Spro by yourself. By doing so will violate the warranty policy from ZTE.
Contact customer service for support.
1. Plug the AC adapter into the power socket on your Spro and then plug
the AC adapter into an electrical outlet.
2. Disconnect the adapter when the battery is fully charged.

14
NOTE:
If the battery is extremely low, you may not be able to power on the Spro
even when it is charging. Allow the Spro to charge longer and try again.
Contact the customer service if you still cannot power on the Spro after
prolonged charging.
Powering On/Off Your Spro
Ensure that the battery is charged.
Press and hold the Power Key to turn on your Spro.
To power it off, press and hold the Power Key to open the options
menu. Touch Power off and then touch OK.
Restarting Your Spro
If the screen freezes or takes too long to respond, try pressing and holding
the Power Key for about 10 seconds to restart the Spro.
NOTE:
You can also use the tip of a pen or paperclip to press and hold the Reset
Key until your Spro restarts.

15
Waking Up Your Spro
Your Spro automatically goes into sleep mode when it is not in use for
certain time. The touch screen is turned off to save power and the keys are
locked to prevent accidental operations.
You can wake up your Spro by following the instruction as below.
1. Press the Power Key or touch the Sleep/Wake Up Key to turn the
touch screen on.
2. Touch and hold on the screen.
NOTE:
If you have set an unlock pattern, a PIN or a password for your Spro, you’ll
need to draw the pattern, or enter the PIN/password to unlock your Spro.
Turning On/Off the Projector
You can use the projector embedded in your Spro to project the display
onto large surfaces.
Touch the Projection Key to toggle the projector on or off.

16
NOTE:
For best results, project onto a non-reflective white flat display surface at a
90°angle to the Spro’s touch screen.

17
Using the Touch Screen
Your Spro’s touch screen enables you to control actions through a variety
of touch gestures.
Touch
When you want to type using the onscreen keyboard, or select items
on the screen such as onscreen buttons, applications and settings
icons, simply touch them with your finger.
Touch and Hold
To open available options for an item (e.g. a link in a web page), simply
touch and hold the item.

18
Swipe or Slide
To swipe or slide means to quickly drag your finger vertically or
horizontally across the screen.

19
Drag
To drag, press and hold your finger with some pressure before you
start to move your finger. While dragging, do not release your finger
until you have reached the target position.
Pinch
In some apps (such as Maps, Browser, and Gallery), you can zoom in
and out by placing two fingers on the screen at once and pinching them
together (to zoom out) or spreading them apart (to zoom in).

20
Rotate the screen
For most screens, you can automatically change the screen orientation
from landscape to portrait by turning the Spro sideways.
Projecting a File saved in Your Spro
You can project a file stored in your Spro.
1. Open the file you want to project.
2. Touch the Projection Key to turn on the projector.
3. Adjust the projection distance and place the Spro on a flat surface.
4. Adjust the focus of projector by rotating the focus wheel.
5. Touch the Projector Key to turn off the projector after you are done.