Zte MC801A User manual

MC801A
Quick Start Guide 1
Pikakäynnistysopas 24
Hurtigstartveiledning 47
Snabbstartsguide 70

1
ZTE
MC801A
Let’s go
Getting started with your device.

2
1. Prepare
• Avalidnano-SIMcard.
• Viewthelabelonyourdevicetogetthedefaultinformation.

3
2. Insert the nano-SIM Card
Opentheslotcoveratthebottomofthedeviceandinsertthenano-SIM
card.

4
3. Power on Your Device
Connect the power adapter to your device and then your device will be
poweredonandconnecttotheInternetautomatically.

5
4. Access the Internet
• Wi-Fi:GetthedefaultSSIDandpasswordonthelabelandconnect
totheWi-Finetworkwithyourmobiledevice,andthenaccessthe
Internet.

6
• Network cable(RJ45):ConnectwiththecomputerviaLANports
andthenaccesstheInternet.

7
5. Change Your Device Settings
You can change the device settings by logging in to the 5G CPE
congurationwebpage.
1. ViewthelabelonyourdevicetogetthedefaultDevice Manager
Website IP address and Password.
2. LaunchtheInternetbrowserandentertheDevice Manager Website
IP address in the address bar.
3. InputthepasswordandthenclickLogin.
4. Afterthe5GCPEcongurationwebpageisopened,youcan
changetheWi-FiSSID,passwordorothersettings.

8
Bridge Mode
Yourdevicesupportsthebridgemodeandyoucanusethisservicefrom
yourserviceprovidertoaccesstheInternet.
1. ConnectyourdevicetotheInternetrst.
2. Logintothe5GCPEcongurationwebpage.
3. ChangetheoperationmodetoBridge Mode.
4. Connectthecomputerorothercable-connectedclienttotheLAN
port1andtheclientcanobtaintheIPaddressfromtheWANDHCP
hostandconnecttotheInternetdirectly.
NOTE:
Thecable-connectedclientconnectedtotheLANport2ortheWi-Fi
connectedclientscannotvisittheInternet,buttheycancommunicate
witheachother.Ifyouwanttochangetheoperationmode,youcanuse
thisclienttologintothecongurationpagetochangethemode.

9
Cable Broadband Mode
Yourdevicesupportsthecablebroadbandmodeandyoucanusethis
servicefromyourserviceprovidertoaccesstheInternet.
1. ConnecteitherofthetwoLANportsandthebroadbandservice
network port with a network cable.
2. Logintothe5GCPEcongurationwebpage.
3. ChangetheoperationmodetoCable Broadband Mode.
4. Setthedetailedparametersgivenbyyourserviceprovider.
5. UseyourclientstoaccesstheInternet.

10
Indicator Lights and Interfaces

11
1. SIGNAL
(Three lights)
On: Three lights show the signal strength. More
lightsonmeansbettersignals.
O󰀨:Thereisnosignalornonano-SIMcard
inserted.
2. NETWORK Red:Thedeviceispoweredonbutnotregistered
tothemobilenetwork.
Blue solid: The device is registered or connected
tothe3G/4Gmobilenetwork.
White solid: The device is registered or
connected to the 5G network.
3. WIFI On:WLAN(Wi-Fi)worksnormally.
Blinking: WPS is activating.
O󰀨:WLAN(Wi-Fi)iso󰀨.
4. POWER On: The device is powered on.
O󰀨:Thedeviceispoweredo󰀨.
5. WPS key PressthiskeytoactivatetheWPSfunction.
Pressandholdforabout10secondstopower
o󰀨thedeviceandthenpressandholdforabout
2 seconds to power on the device.

12
6. External
antenna port Connect to external antennas.
7. PHONEport Telephone port (optional).
8. LANports LAN1port:ConnecttotheWANintheCable
Broadband Mode.
LAN2port:ConnecttoaPC.
9. Power port Connect to the power adapter.
10. nano-SIMcard
slot and reset
hole
Insertyournano-SIMcard.
Resethole:Pressandholdforabout3seconds
torestoreyourdevicetothefactorysettings.

13
Troubleshooting
Internet Related Problems
Symptoms Possible Problems / Solutions
IcannotaccesstheInternetat
all.
• Pleasecheckyourcongurationsettings.
• Pleasewait1~2minutesfortherouterto
initialize.
• Checkyournetworkindicators.
The download or upload speed
is very slow.
The speed is dependent on signal strength. Check
your signal strength and network type.
Icannotvisitthe5GCPE
congurationwebpage.
• EnterthecorrectIPaddress.Youcanview
thelabelonyourdevicetogetthedefaultIP
address.
• OnlyuseonenetworkadapterinyourPC.
• Donotuseanyproxyserver.
IcannotestablishtheWi-Fi
connectionbetweenmydevice
and the client.
• MakesuretheWi-Fifunctionisactive.
• Refreshnetworklistandselectthecorrect
SSID.
• ChecktheIPaddresstomakesureyourclient
canobtainanIPaddressautomaticallyinthe
Internetprotocol(TCP/IP)properties.
• Typethecorrectnetworkkey(Wi-Fipassword)
when you connect to the device.

14
Others
Symptoms Possible Problems / Solutions
The signal indicator does not light. Thisindicatespoorreception.Trymovingthe
device to another location near the window.
Problemswiththepasswords.
• ForthedefaultWi-Ficonnectionpassword
andthedefaultpasswordofthe5GCPE
congurationwebpage,pleasecheckthe
label on the device.
• Ifyouchangedthepasswordsandforgot
them,youneedtorestorethedevicetothe
factorydefaultsettings.
Getting More Help
Youcangetmorehelpby:
• Sendinganemailto[email protected]
• Visitingwww.ztedevices.com

15
LEGAL INFORMATION
Copyright © 2020 ZTE CORPORATION.
All rights reserved.
Nopartofthispublicationmaybequoted,reproduced,translatedor
usedinanyformorbyanymeans,electronicormechanical,including
photocopyingandmicrolm,withoutthepriorwrittenpermissionofZTE
Corporation.
Notice
ZTECorporationreservestherighttomakemodicationsonprinterrors
orupdatespecicationsinthisguidewithoutpriornotice.
Disclaimer
Imagesandscreenshotsusedinthisguidemaydi󰀨erfromtheactual
product.Contentinthisguidemaydi󰀨erfromtheactualproductor
software.
Trademarks
ZTEandtheZTElogosaretrademarksofZTECorporation.
Othertrademarksandtradenamesarethoseoftheirrespectiveowners.
Version No.:R1.0

16
Warning and Notice
Safety Precautions
• Someelectronicdevicesmaybesusceptibletoelectromagnetic
interference.LocatethedeviceawayfromTVset,radioandother
electronicequipmenttoavoidelectromagneticinterference.
• Thedevicemayinterferewithmedicaldeviceslikehearingaids
andpacemakers.Consultaphysicianorthemanufacturerofthe
medicaldevicebeforeusingit.
• Pleasekeepyourselfatleast20centimetersawayfromyour
device.
• Donotuseyourdeviceindangerousenvironmentssuchasoil
terminalsorchemicalfactorieswherethereareexplosivegasesor
explosive products being processed.
• Pleaseuseoriginalaccessoriesoraccessoriesthatareauthorized
byZTE.Unauthorizedaccessoriesmaya󰀨ectthedevice
performance,damagethedeviceorcausedangertoyou.
• Donotattempttodismantlethedevice.Therearenouser-
serviceable parts.

17
• Donotallowthedeviceoraccessoriestocomeintocontactwith
liquidormoistureatanytime.Donotimmersethedeviceinany
liquid.
• Donotplaceobjectsontopofthedevice.Thismayleadto
overheatingofthedevice.
• Thedevicemustbeplacedinawell-ventilatedenvironmentforuse.
• Donotexposethedevicetodirectsunlightorstoreitinhotareas.
Hightemperaturecanshortenthelifeofelectronicdevices.
• Donotallowchildrentoplaywiththedeviceorpoweradapter.
• Thedeviceisforindooruseonly.Donotusethedeviceoutside.
• Forpluggableequipment,thesocket-outletshallbeinstallednear
theequipmentandshallbeeasilyaccessible.
Cleaning and Maintaining
• Useanantistaticclothtocleanthedevice.Donotusechemicalor
abrasivecleanserasthesecoulddamagetheplasticcase.Turno󰀨
yourdevicebeforeyoucleanit.
• Usethedevicewithinthetemperaturerangeof-20°C~+55°C,
andthestoragetemperaturerangeis-40°C~+70°C.Thehumidity
rangeis5%~95%.

18
• Donotuseyourdeviceduringathunderstorm.Removethemains
powerpackfromthewallsocket.
Limited Warranty
Thiswarrantydoesnotapplytodefectsorerrorsintheproductcaused
by:
i. Reasonableabrasion.
ii. Endusers’failuretofollowZTE’sinstallation,operationor
maintenanceinstructionsorprocedures.
iii. Endusers’mishandling,misuse,negligence,orimproper
installation,disassembly,storage,servicingoroperationofthe
product.
iv. ModicationsorrepairsnotprovidedbyZTEoraZTE-certied
individual.
v. Powerfailures,surges,re,ood,accidents,andactionsofthird
parties or other events outside ZTE’s reasonable control.
vi. Usageofthird-partyproductsorusageinconjunctionwiththird-
partyproductsifsuchdefectsareduetothecombinedusage.
vii. Anyothercausebeyondtherangeofnormalusageintendedforthe
product.