Zuiver Hardy Cabinet User manual

Bx01BODYA QtyComponents
Code
Parts Check List
ASSEMBLY INSTRUCTIONS
CABINET HARDY
SHELF
1.
- PLEASE DO NOT DISCARD ANY OF THE PACKAGING UNTIL YOU
HAVE CHECKED ALL THE PARTS AND THE PACKSOF HARDWARE.
- BEFORE YOU BEGIN TO ASSEMBLE YOUR NEW PIECE OF
FURNITURE, PLEASE CHECK TO ENSURE THAT ALL PARTS HAVE
BEEN SUPPLIED.
- FOLLOW INSTRUCTIONS CLOSELY AS DEVIATION FROM THEM
MAY VOID YOUR WARRANTY AND PRESENT A POSSIBLE SAFETY
RISK.
- IT IS RECOMMENDED THAT ASSEMBLY IS DONE ON A SOFT
SURFACE LIKE CARPET TO AVOID ANY DAMAGE.
- PERIODICALLY CHECK AND RE-TIGHTEN ANY FASTENERS. WIPE
DOWN ALL SURFACES WEEKLY WITH A CLEAN CLOTH. DO NOT
CLEAN ANY SURFACES WITH HARSH ABRASIVES OR CHEMICALS.
x02
qty
description
code
Hardware Check List
01 Metal bracket x04
02 Screw x04
04 Nylon wall strap x02
03 Plastic strap x02
2.
Tools required
Not supplied
B
A
A
B
B
B

3.
Back view
5.
Drill a hole
on the wall
The wall
4.
01
02
020103
Push to tighten
04

* The doors can be adjusted in all 3 directions to create an even fit between doors on this cabinet.
Follow the appropriate directions above to adjust door(s) as necessary.
Side to Side Adjustment
loosen screw A, adjust gap
with screw B and re-tighten
Screw A.
Depth Adjustment
loosen screw A, push hinge
arm forwards or backwards,
re-tighten screw A and secure
Screw B with a 1/4 turn
clockwise.
Height Adjustment
loosen screw C, adjust door
height and re-tighten screw C.
A
B
C
The door will not be flush
with the side panel.
The door will appear too far or too close
from the front edge of the side panel.
The door will not be flush
with the vertical panel.
ASSEMBLY INSTRUCTIONS
HINGE ADJUSTMENT