ZUO 100506 User manual

AI-V13-220705
Page 1 of 2
A
B C
D
x1
x1 x1
x2
F
F
F
E
E
E
E
F
B
C
H
E
D
D
D
Step 1
Step 2 Step 3
Lay both frames (B) and (C) on a at surface.
Align the two holes in the center bar, and insert
the two bolts (F). Do not tighten completely. Note
that one bar of the center frame is higher than the
other; the *lower* bar is the back side of the seat.
Align the cross bar (D) with rounded cutouts
in (B) and (C) as shown. Tighten bolts (E)
with Allen wrench (H) as rmly as possible.
Tighten center bolts (F)
as rmly as possible.
FRONT
BACK
PARTS LIST / LISTE DES PIÈCES
ASSEMBLY INSTRUCTIONS / INSTRUCTIONS D’ASSEMBLAGE
QUESTIONS? PROBLEM? If you need assistance, please let us help you
CONTACT US! Monday to Friday 6 am to 5 pm PST USA: 866-798-6663 CANADA: [phone]
Ex4M6 30mm
Fx2M8 14mm
Gx4M6 22mm
Hx16mm
AI-V8-210717
ITEM NAME / NOM D’ ITEM: SMART COUNTER CHAIR
ITEM NUMBER / NO.ITEM : 100506 / 101994 / 109323 / 109324 / 109498
109649 / 109652 / 109681
QUESTIONS? PROBLEM? If you need assistance, please let us help you
CONTACT US! Monday to Friday 6 am to 5 pm PST USA, Canada and Mexico: [phone]
Assembly Video

AI-V13-220705
Page 2 of 2
G
G
G
G
Step 4
Step 5
Turn chair right side up,
take a seat, and enjoy.
A
B C
Lay seat (A) on a at and protected
surface. Flip the frame from steps 1-3
upside down, and lay it on top of the
underside of the seat. Make sure the back
of the frame is aligned with the back of the
seat. Insert and tighten all four bolts (G).
*Note that one bar of the center frame is
higher than the other; the *lower* bar is
the back side of the seat.
BACK
BACK
FRONT
AI-V8-210717