ZUUM SP6PH User manual

Surge Protector Series
User Manual
Model: SP6PH
High Performance 1G PoE Surge Protector

1
Introduction
SP6PH is an in-line surge protector designed to protect PoE (Power over Ethernet) devices from high
voltage surges, with network bandwidth up to 1000Mbps.
Features
⚫Supports bandwidth up to 1000 Mbps.
⚫Supports IEEE 802.3af, 802.3at, 802.3bt PoE standard.
⚫Supports Mid-Span and End Span PoE.
⚫Response time less than 1 ns.
Installation View
Panel Review
Connection
Connect the device that needs to be protected to the Equipment End; the Ethernet cable to the Cable
End To ensure the surge protector well-performs, please also make sure the ground wire connects to the
earth.
Note:
The cable must be connected to ground in
order to ensure the protection.

2
RJ45 Pinout: (TIA/EIA-568-B)
Application
⚫Computer Control Rooms
⚫Educational Institutions
⚫Server Farms
⚫Commercial Offices
⚫Manufacturing Facilities
⚫Transmitter and Receiver Stations
(PIN TIA/EIA-568B)
PIN
Wire Color
1
Orange-white
2
Orange
3
Green-white
4
Blue
5
Blue-white
6
Green
7
Brown-white
8
Brown

3
Specification
ITEM NO.
SP6PH
Support
Compliance
IEEE 802.3af, 802.3at, 802.3bt, IEC 61000-4-2, IEC 61000-4-5
Network Bandwidth
10/100/1000 Mbps
Response Time
Less than 0.7nS
ESD Protection
30KV (Air), 30kV Contact)
Lightning Protection
10KA (8/20 us), 20KV (8/20 us)
Ports & Interfaces
Equipment End
1 x RJ45
Cable End
1 x RJ45
Ambient Temperature
Operation
-40 to 70℃
Storage
-40 to 90℃
Humidity
Up to 95%
Physical Characteristics
Dimensions
67 x 87 x 27mm
Weight
160g
ZM11112022 Design and specifications are subject to change without notice