ZyXEL Communications PK5000Z User manual

© 201CHQWXU\/LQN
1
ZyXEL® PK5000Z
How to configure remote management
Use this document if:
You want to configure remote management
This document assumes:
You are using the ZyXEL PK5000Z modem

© 20&HQWXU\/LQN
2
1. Open a web browser and type 192.168.0.1 in the address bar.
2. Select Advanced Setup.
3. Select Remote Management
4. Select the remote GUI state. If you are disabling this feature, select the apply button. If you
enabling this option, proceed to the next step.

© 20&HQWXU\/LQN
3
5. Enter the Administrator Username and Administrator Password. Write these down, you will use
them to access your modem in the future.
6. By default, remote management is set to port 443 for HTTPS access. If port 443 has been
Do not change this setting, without understanding the technical impacts.
7. Click Apply.To access your modem remotely you will need to use https:// followed by the modem
IP.