ZyXEL Communications Merula User manual

Quick Start Guide for Merula Broadband
Any questions?
If you have any further questions setting up,
please visit https://support.merula.net
email [email protected]
or call us on 01480 355 566
Wireless
Once the router has booted you can connect
to your wireless network from any suitable
device.
The network name and password are printed
on the back of the router along with a QR code
to auto-connect.

Plug in power supply and connect to
router 3 .
Turn router power button on 4 .
Check LEDs are lit green on the front.
(This may take a few minutes)
For any device which connects directly to your
router use an Ethernet cable and connect to
one of the four yellow LAN ports 2 .
ADSL and FTTC ConnectionsFull Fibre & Ultrafast connections
Connect the DSL cable to your router .
If your phone socket has a built in DSL
(top), please plug the cable into the DSL
socket. If not connect via the filter (bottom)
included in the box.
Plug one end of the Ethernet cable to
the blue WAN port of the router ,
the other end should connect to the
ONT socket for fibre broadband or the
Ethenet socket for your internet service.
3
2
1b
4
1a
or
1a
1b