ZyXEL Communications PoE-10 User manual

ZyXEL’s Power over Ethernet solutions deliver a unified supply of data, voice, and video as well as electrical power
through a single source by sending power over standard Category 5 and above twisted pair cables. Power over Ethernet
simplifies installation and eliminates the need to run separate power cords and LAN cables to each Access Point or port
location. ZyXEL Power over Ethernet solutions enhance the reliability of Ethernet devices such as wireless LAN Access
Points, Web Cameras and IP Phones.
Power over Ethernet streamlines wireless infrastructure deployment and lowers cost. Whether on a factory floor or in an
enterprise facility, running power to difficult to reach locations with ZyXEL’s Power over Ethernet solutions significantly
reduce cabling and outlet requirements while providing the lowest total cost of ownership.
PoE-10
Single-port Power over Ethernet Injector
The ZyXEL PoE-10 Single-port Power over Ethernet Injector is designed for use with 10/100 BaseT Ethernet networks.
The PoE-10 supplies DC power by injecting electricity through the unused twisted-wires (pairs 4/5 and 7/8) in a standard
8-pin CAT 5 cable. The PoE-10 provides a cost-effective power solution for a small-site deployment by supplying power
directly to Access Points from a central location.
PoE-80
8-port Power over Ethernet Hub
The ZyXEL PoE-80 8-port Power over Ethernet Hub installs conveniently in your wiring closet rack. The form factor
requires minimal space and fits easily onto a standard size rack. The PoE-80 automatically detects Power-over-Ethernet
enabled Access Points and supplies in-line power for up to eight APs through its easy-to-access interface on the
front panel.
Benefits
Application Diagram
• Ensures uninterrupted network operation by providing a “power safe” path to the user
• Intelligent detection process to detect Power over Ethernet enabled terminals
• Furnishes easy and cost-effective installation with fewer cables and outlets
• Provides one central secure location for power
PoE-10
Single-port Power over Ethernet Injector
PoE-80
8-port Power over Ethernet Hub
Internet
Security Gateway
Switch
PoE-10
PoE-80
ZyAIR G-3000
ZyAIR B-3000 VoIP Phone
ZyAIR B-420
ZyAIR B-420

PoE-10 Single-port Power over Ethernet Injector PoE-80 8-port Power over Ethernet Hub
RJ-45 Port Pin Assignments
Specifications
Copyright©2004 ZyXEL Communications Corporation. All rights reserved. ZyXEL, the ZyXEL logo are registered trademarks of ZyXEL Communications Corp. Other trademarks and service names referenced are properties of their respective holders. All specifications are subject to change without notice. 65-100-111101
Corporate Headquarters
ZyXEL Communications Corp.
Tel: [phone]
Fax:[phone]
Email: [email protected]
http://www.zyxel.com
http://www.zyxel.com.tw
Denmark
Tel: [phone] Fax: [phone]
Email: [email protected]
http://www.zyxel.dk
Finland
Tel: [phone] Fax: [phone]
Email: [email protected]
http://www.zyxel.fi
France
Tel: [phone] Fax: [phone]
Email: [email protected]
http://www.zyxel.fr
Germany
Tel: [phone] Fax: [phone]
Email: [email protected]
http://www.zyxel.de
North America
Tel: [phone]
Fax: [phone]
Email: [email protected]
http://www.us.zyxel.com
Norway
Tel: [phone] Fax: [phone]
Email: [email protected]
http://www.zyxel.no
Spain
Tel: [phone] Fax: [phone]
Email: [email protected]
http:// www.zyxel.es
Sweden
Tel: [phone] Fax: [phone]
Email: [email protected]
http://www.zyxel.se
Item PoE-10 PoE-80
Technical Specification
Compatibility Compatible with certain ZyXEL --
PoE-enabled devices
Standards -- IEEE 802.3af
Management -- Microsoft Windows-based application for
power management
Power Management Functions -- • Current ports serviced list
• System total serviced power budget
• Power port disable/ enable
• Power support priority
• Power overload auto shut down
• Power port operation status
• Power consumption limit
Hardware Specification
LEDs • 1: PWR • System: Power
• 1: LNK • Per Port (2 LEDs): Power Forwarding, Power Off
Ports • 1 DATA RJ-45 Ethernet port • 8 DATA IN RJ-45 Ethernet ports
• 1 PWR&DATA PoE injector RJ-45 • 8 DATA OUT PoE injector RJ-45 Ethernet ports
Ethernet port • 1 RS-232 console port
Physical Specification
Weight 101g 2.7kg
Dimensions 74(L) x 102(D) x 30(H) mm 440(L) x 224(D) x 44(H) mm
(19” in width rack mountable)
Power Requirement
Power Output 15.4 Watts maximum -48V DC, 100 Watts maximum
Current (per port maximum): 350mA @ 48V DC
Power Output Current 350 mA maximum
Power Supply • Input: 100 ~ 240V AC, 50/60Hz 100 ~ 240V AC, 50/60Hz internal universal
• Output: 48V .5A power supply with fuse and power switch
Power Consumption 20 Watts maximum 130 Watts maximum
Operation Environment
Operating Temperature 5 ~ 50ºC (41 – 122ºF) 0 ~ 45ºC (32 – 104ºF)
Operational Humidity 10% - 90% 10% to 95% (Non-condensing)
Certification
EMI and Safety FCC Class B, CE, CSA FCC Class A, CE, UL, cUL
PIN NO RJ-45 SIGNAL ASSIGNMENT
1 Output Transmit Data +
2 Output Transmit Data -
3 Receive Data +
4 Power +
5 Power +
6 Receive Data -
7 Power -
8 Power -
12345678