1TAC HL1200 User manual

Thank you for purchasing the
HL1200!
As a Thank You for choosing the HL1200,
we would like to offer you 10% off your
next 1TAC.com purchase. Use the code
below for your next purchase on our
website:
THANKYOU10
User Manual
HL1200

The HL1200 powered by Cree XLamp XML2, produces the
highest quality light with up to 1200 lumens very nicely fit within
a small, compact unit.
HL1200 Features:
• Cree XM-L2 HI LED up to 1200 Lumens with a LAMP lifespan of
100,000 hours
• Simple operation - On/Off switch for selecting the 3 brightness
levels
• 3 brightness levels including High, Medium and Strobe
• Up to 500 meter zoom capability
• Telescoping head
• Rechargeable battery pack for use with (2) 18650 Li-Ion Batteries
(included)
• Weatherproof / Adjustable headband
• Waterproof / Dustproof - IP65 Enclosure Rating
• Digitally regulated output to maintain constant brightness
• Over heat protection to avoid high-temperature of the surface
• Made of durable aircraft-grade aluminum alloy
• Premium Type III hard-anodized anti-abrasive finish
• Toughened ultra-clear glass lens with anti-reflective coating
• Strictly in line with ANSI Standard
To Operate HL1200:
Power ON/OFF – Press the button located on the side of the
zoom lens to activate the headlight. Press again to turn it off.
Mode Selecting – Press the side button gently to cycle through
three different modes, Medium, High, and Strobe.
Zoom Function – While the light is on, pull the head slightly
away from the body to zoom in. Push back in to zoom out.
Telescoping Function – While zoomed in or out, rotate the light
up and down.
Battery:
Accepts (2)18650 Rechargeable Lithium-Ion Batteries
Battery Replacement:
Remove the cover on the back of the device to insert (2)18650
rechargeable batteries. Secure the cover back into place before
powering the device on.
To Charge:
Use the included wall adapter and plug into the side of the
battery compartment; located under a small rubber plug.
Warning:
DO NOT mix batteries of different brand, sizes, types, or
capacities. After charging the 18650 batteries, please take out
of the charger base. It takes 4 hours to fully charge the battery.
When the headlight is not used for an extended period of time,
please take the batteries out of the device. DO NOT let the
18650 rechargeable batteries run to long on the low power as
this may cause damage to the battery and prevent future
performance.
Customer Support:
To reach our customer support staff Monday through Friday
8am - 4pm PST, email s[email protected] or call 877-616-3515,
press option 2.