manuals.online logo
Brands
  1. Home
  2. •
  3. Brands
  4. •
  5. 1TAC
  6. •
  7. Work Light
  8. •
  9. 1TAC Roadside Safety Disc User manual

1TAC Roadside Safety Disc User manual

Thank you for purchasing the
Roadside Safety Disc!
As a Thank You for choosing the Roadside
Safety Disc, we would like to offer you 10%
off your next 1TAC.com purchase. Use the
code below for your next purchase on our
website:
THANKYOU10
User Manual
Roadside Safety Disc
The Roadside Safety Disc has 15 Ultra Bright LED’s and can
be seen from over 5,000 feet!
Roadside Safety Disc Features:
• Lamp Life - Over 1,000 hours
• Run Time - 13 hours
• LED Emitters - 9 unique flashing modes
• Multi-use - Magnet base
• Durability - Waterproof and floats
Range of Use:
• A safe and ecologically friendly emergency road flare. NO
spark, open flame, fumes, or toxic chemicals are produced
when using the Safety Disc
• Shock resistant construction makes the Safety Disc durable
and able to withstand potential impact
• The Safety Disc can be used lying flat, on its side, or
hanging. It has a magnet for metal applications. It is also
waterproof, so it may be used in marine applications
submerged up to 33 feet. If not attached by magnet, the
Safety Disc will float
To Operate Roadside Safety Disc:
Press the ON/OFF button to rotate through the following 6 light
patterns:
LIGHT SEQUENCES RUN TIME
1. Double Pulse 15 Hours
2. Single Pulse 15 Hours
3. Short Single Pulse 100 Hours
4. Rotating Beacon 15 Hours
5. Alternating Flash 24 Hours
6. SOS 8 Hours
7. Steady Full Beam 10 Hours
8. Steady Low Beam 15 Hours
9. White LED Work Light (short double click) 10 Hours
10. Off
ALTERNATE OPERATION:
To turn the Safety Disc off without cycling through the 6 light
patterns, press and hold the ON/OFF button for 2 seconds.
Battery Replacement: (3*AAA Batteries)
1. Unscrew the two screws completely on the bottom of the unit.
2. Place the screwdriver under one of the plastic tabs and twist
to open the cover.
3. Lift the cover to reveal the battery compartment.
4. Insert/Replace AAA batteries into the battery retainer. 5.
Replace cover and screws.
Customer Support:
To reach our customer support staff Monday through Friday 8am
- 4pm PST, email [email protected] or call 877-616-3515,
press option 2.

Popular Work Light manuals by other brands

Qlightec EPLS Series quick start guide

Qlightec

Qlightec EPLS Series quick start guide

BASETech 2290784 operating instructions

BASETech

BASETech 2290784 operating instructions

Performance Tool W2250 owner's manual

Performance Tool

Performance Tool W2250 owner's manual

GE 99386 manual

GE

GE 99386 manual

NightSearcher BeatLite 2000X user manual

NightSearcher

NightSearcher BeatLite 2000X user manual

RIDGID R829 Operator's manual

RIDGID

RIDGID R829 Operator's manual

Perel EWL08 user manual

Perel

Perel EWL08 user manual

Workzone 1148 user manual

Workzone

Workzone 1148 user manual

Westinghouse SR83SP01H-08 instruction manual

Westinghouse

Westinghouse SR83SP01H-08 instruction manual

UK 4AA-AN2 Instructions & Important Information

UK

UK 4AA-AN2 Instructions & Important Information

Lund Industries AT-1100 installation instructions

Lund Industries

Lund Industries AT-1100 installation instructions

Ryobi P780 Operator's manual

Ryobi

Ryobi P780 Operator's manual

SATA 90722 user manual

SATA

SATA 90722 user manual

Sensio TRIOTONE CONNEX installation instructions

Sensio

Sensio TRIOTONE CONNEX installation instructions

Bosch GLI PortaLED 102 Original instructions

Bosch

Bosch GLI PortaLED 102 Original instructions

Milwaukee M18 Operator's manual

Milwaukee

Milwaukee M18 Operator's manual

RAVEMEN TR200 user manual

RAVEMEN

RAVEMEN TR200 user manual

MICA ML-808 User instructions

MICA

MICA ML-808 User instructions

manuals.online logo
manuals.online logoBrands
  • About & Mission
  • Contact us
  • Privacy Policy
  • Terms and Conditions

Copyright 2025 Manuals.Online. All Rights Reserved.