2-Wire Wireless PC Card User manual

Installation Guide
Wireless PC Card

5100-000094-000 Rev C

1
Wireless PC Card
The Wireless PC Card is a wireless network card that fits into any standard PC
Card Type II slot. A standard Ethernet card requires a cable connection to a hub or
a patch panel. Using the Wireless PC Card, you have the same connectivity without
the wires. Expanding or redesigning your network is easy, and unlike cabled
Ethernet, the Wireless PC Card allows you to roam throughout the network while
remaining connected to the LAN.
Installation
Follow these steps to install the Wireless PC Card:
Step 1 - Install the Wireless PC Card.
Step 2 - Add the adapter to your computer and install the drivers.
Step 3 - Reboot your computer so Windows recognizes the adapter.
The following sections give you detailed instructions for completing each step.

2
Installing the Wireless PC Card
To install the Wireless PC Card, turn off
your computer and simply insert the
card into the PC Card slot. If you have a
desktop computer, you need to use an
internal wireless adapter in order to
insert the Wireless PC Card.

3
Installing Drivers For Windows 98SE
1. Power on your computer. The Add New
Hardware Wizard opens. Click Next to
continue.
2. When the next window opens, select
Search for a better driver for your device
(Recommended), and click Next.

4
3. Insert the HomePortal Setup Wizard CD into
your CD-ROM drive, uncheck Floppy disk
drives, select the CD-ROM drive checkbox,
and click Next.
4. Windows locates the best driver for your
device. Click Next to continue.

5
5. After the drivers are copied, click
Finish.
6. When the System Setting Change
window opens, click Yes to reboot your
computer and complete the
installation.

6
Installing Drivers For Windows ME
1. Power on your computer and insert the HomePortal Setup Wizard CD into your
CD-ROM drive.
2. When the Add New Hardware Wizard
window opens, select Automatic search
for a better driver (Recommended), and
click Next.

7
3. After the driver files are copied, click
Finish.
4. When the System Settings Change
window opens, click Yes to reboot your
computer and complete the
installation.

8
Installing Drivers For Windows 2000
1. Power on your computer and insert the HomePortal Setup Wizard CD into your
CD-ROM drive.
2. When the Found New Hardware Wizard
window opens, click Next to continue.

9
3. The next window prompts you to
install device drivers. Select Search for
a suitable driver for my device
(recommended), and click Next.
4. When the Locate Driver Files window
opens, deselect the Floppy disk drives
checkbox, select the CD-ROM
checkbox, and click Next.

10
5. When the Driver Files Search Results
window opens, click Next.
6. Click Finish to complete the
installation.

11
Installing Drivers For Windows XP
1. Power on your computer and insert the HomePortal Setup Wizard CD into your
CD-ROM drive.
2. When the Found New Hardware Wizard
window opens, select Install the
software automatically (Recommended)
and click Next to continue.

12
3. The drivers are installed.
4. Click Finish to complete the
installation.