23zero DUKE ANNEX User guide

TM
DUKE ANNEX

1
TM
DUKE ANNEX SETUP MANUAL
1.
3.
Lay DUKE ANNEX upside down and
locate ridgepole hook & loop tabs
Locate and attach all side hook & loop tabs to swag head and centre poles.
2. Attach these to ridgepole and fold over.
Note: Tabs are on underside of annex.

2
TM
DUKE ANNEX SETUP MANUAL
4.
5.
Hook elastic cords to upper side pole clips as pictured.
Note: Annex side - 1 cord per corner
Fly sheet side - 2 cords per corner
Peg either side of annex beside swag head & centre poles through shock cord loops.

3
TM
DUKE ANNEX SETUP MANUAL
6. Finish by pegging all remaining shock cord peg point loops
5. Set up complete.

TM
DUKE ANNEX SETUP MANUAL
4
WARRANTY
23ZERO will replace or repair any product at its discretion that is subject to faulty manufacturing
or workmanship including materials.
Exclusions
The above warranty is limited to manufacturing and materials defects. Not including damage
caused by misuse or abuse, wear and tear, condensation, extreme weather, accidents, incor-
rect set up, damage caused by mould, insects, animals or children. This also excludes broken
poles and damage caused by a jammed, snagged zipper or excessive force applied to zipper
causing failure.
Consumer rights
Our goods come with guarantees that cannot be excluded under Australian law. You are entitled
to a replacement or refund for a major failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have goods repaired or replaced if the
goods fail to be of acceptable quality and failure does not amount to a major failure.
* Due to our policy of continual product development, the specications, colours and features
may vary.
Making a claim
To make a claim in relation to the above manufacturers warranty please ensure you retain your
sales receipt of purchase. Please email us at [email protected] with photos of the your
claim, purchase receipt and contact details. If you require additional assistance, please phone
03 9547 4691 to discuss and arrange your claim. Product subject to warranty will be sent to
23ZERO Australia, 32b Eileen St Clayton South, Victoria 3169. All freight costs associated with
return of product for assessment is payable by consumer.