2B Technologies 106 User manual
106 Industrial Installation Manual Rev. A-1
ii
Contents
IDENTIFICATION RECORDS iii
PRINTING HISTORY iv
WARRANTY STATEMENT v
WARNINGS vi
1. INTRODUCTION 1
2. INSTALLATION 1
2.1. Mounting ......................................................................................................................................1
2.2. Power...........................................................................................................................................1
2.3. Inlet Manifold................................................................................................................................2
2.4. Analog Output, Serial Communication, and Relays.....................................................................5
3. GAS CONNECTIONS 8
4. MAINTENANCE 8
106 Industrial Installation Manual Rev. A-1
iii
IDENTIFICATION RECORDS
Record the following information for future reference:
Unit serial number: ______________________________________
Warranty start date: _______________________________________
(date of receipt)
106 Industrial Installation Manual Rev. A-1
iv
PRINTING HISTORY
This manual covers the Industrial enclosures offered for 2B Technologies Series 106
Ozone Monitors. New editions of this manual are complete revisions that reflect
updates to the instrument itself, as well as clarifications, additions and other
modifications of the text.
Revision A-1..................................................................................................August 2020
TRADEMARKS & PATENTS
2B Technologies, 2B Tech, and 2Bare trademarks of 2B Technologies.
CONFIDENTIALITY
The information contained in this manual may be confidential and proprietary, and is the
property of 2B Technologies. Information disclosed herein shall not be used to
manufacture, construct, or otherwise reproduce the goods disclosed herein. The
information disclosed herein shall not be disclosed to others or made public in any
manner without the expressed written consent of 2B Technologies.
© Copyright 2020, 2B Technologies
All rights reserved.
106 Industrial Installation Manual Rev. A-1
v
WARRANTY STATEMENT
2B Technologies warrants its products against defects in materials and workmanship.
2B Technologies will, at its option, repair or replace products that prove to be defective.
The warranty set forth is exclusive and no other warranty, whether written or oral, is
expressed or implied. 2B Technologies specifically disclaims the implied warranties of
merchantability and fitness for a particular purpose.
Warranty Periods
The warranty period is one (1) year from date of receipt by the purchaser, but in no
event more than thirteen (13) months from original invoice date from 2B Technologies.
Warranty Service
Warranty Service is provided to customers through phone support, Monday - Friday,
from 9:00 a.m. to 5:00 p.m., Mountain Time USA, or by submission of a tech support
ticket at www.twobtech.com/techsupport. Phone support is for trouble-shooting and
determination of parts to be shipped from 2B Technologies to the customer in order to
return the product to operation within stated specifications. If phone support is not
efficient and effective, the product may be returned to 2B Technologies for repair or
replacement. Prior to returning the product, a Repair Authorization Number (RA) must
be obtained from the 2B Technologies Service Department.
Shipping
2B Technologies will pay freight charges for replacement or repaired products shipped
to the customer site. Customers shall pay freight charges for all products returning to
2B Technologies.
Conditions
The foregoing warranty shall not apply to defects resulting from improper or inadequate
maintenance, adjustment, calibration, or operation by the customer. Usage of maintenance
materials purchased from suppliers otherthan 2B Technologies will void this warranty.
Limitation of Remedies and Liability
The remedies provided herein are the Customer's sole and exclusive remedies. In no
event shall 2B Technologies be liable for direct, indirect, special, incidental or
consequential damages (including loss of profits) whether based on contract, tort or any
other legal theory. The Industrial Enclosure Installation Manual is believed to be
accurate at the time of publication and no responsibility is taken for any errors that may
be present. In no event shall 2B Technologies be liable for incidental or consequential
damages in connection with or arising from the use of the Industrial Enclosure
Installation Manual and its accompanying related materials. Warranty is valid only for
the country designated on the 2B Technologies quote or invoice.
106 Industrial Installation Manual Rev. A-1
vi
WARNINGS
ENGLISH
WARNING:
Any operation requiring access to the inside of the equipment, could result
in injury. To avoid potentially dangerous shock, disconnect from power
supply before opening the equipment.
WARNING:
This symbol, on the instrument indicates that the user should refer to
the manual for operating instructions.
WARNING:
If this instrument is used in a manner not specified by 2B Technologies,
USA, the protection provided by the instrument may be impaired.
ESPAÑOL
ATENCION:
Cualquier operación que requiera acceso al interior del equipo, puede
causar una lesión. Para evitar peligros potenciales, desconectarlo de la
alimentación a red antes de abrir el equipo.
ATENCION:
Este símbolo, en el instrumento indica que el usuario debería
referirse al manual para instrucciones de funcionamiento.
ATENCION:
Si este instrumento se usa de una forma no especificada por 2B
Technologies, USA, puede desactivarse la protección suministrada por el
instrumento.
FRANÇAIS
ATTENTION:
Chaque opération à l’intérieur de l’appareil, peut causer du préjudice. Afin
d’éviter un shock qui pourrait être dangereux, disconnectez l’appareil du
réseau avant de l’ouvrir.
ATTENTION:
Le symbol, indique que l’utilisateur doit consulter le manuel
d’instructions.
ATTENTION:
Si l’instrument n’est pas utilisé suivant les instructions de 2B Technologies,
USA, les dispositions de sécurité de l’appareil ne sont plus valables.
DEUTSCH
WARNHINWEIS:
Vor dem Öffnen des Gerätes Netzstecker ziehen!
WARNHINWEIS:
Dieses, auf dem Gerät weist darauf hin, dab der Anwender zuerst
das entsprechende Kapitel in der Bedienungsanleitung lesen sollte.
WARNHINWEIS:
Wenn das Gerät nicht wie durch die Firma 2B Technologies, USA,
vorgeschrieben und im Handbuch beschrieben betrieben wird, können
die im Gerät eingebauten Schutzvorrichtungen beeinträchtigt werden.
ITALIANO
ATTENZIONE:
Qualsiasi intervento debba essere effettuato sullo strumento può essere
potenzialmente pericoloso a causa della corrente elettrica.
Il cavo di alimentazione deve essere staccato dallo strumento prima della
sua apertura.
ATTENZIONE:
Il simbolo, sullo strumento avverte l’utilizzatore di consultare il
Manuale di Istruzioni alla sezione specifica.
ATTENZIONE:
Se questo strumento viene utilizzato in maniera non conforme alle
specifiche di 2B Technologies, USA, le protezioni di cui esso è dotato
potrebbero essere alterate.
DUTCH
OPGELET:
Iedere handeling binnenin het toestel kan beschadiging veroorzaken.
Om iedere mogelijk gevaarlijke shock te vermijden moet de aansluiting
met het net verbroken worden, vóór het openen van het toestel.
OPGELET:
Het symbool, geeft aan dat de gebruiker de instructies in de
handleiding moet raadplegen.
OPGELET:
Indien het toestel niet gebruikt wordt volgens de richtlijnen van 2B
Technologies, USA gelden de veiligheidsvoorzieningen niet meer.
CHINESE
警告：
任何需要接触设备内部的操作均可能造成人身伤害。为避免可能
的触电危险，请在打开设备前切断电源。
警告：
这个符号 在仪器上表示用户应参考说明书上的操作指南。
警告 :
如果仪器没有按照美国2B科技公司指定方式操作，仪器的保护性
能会减弱。
JAPANESE
警告：
機器の内部で操作する時、怪我できます。危険な衝撃を回避
するために、機器を開ける前に、電源を切断してください。
警告：
機器でこの記号 を見れば、マニュアルを読んでください。
警告：
この機器は2B テクノロジー会社、
USAの指定でしなければ、機器の保護が損なえます。
106 Industrial Installation Manual Rev. A-1
1
1. INTRODUCTION
This manual covers the Industrial enclosure offered for the 2B Technologies Series 106
Ozone Monitors. This polyester enclosure provides protection for the Ozone Monitor
while permitting easy access for connections, maintenance, and repairs. The shatter-proof
window provides for viewing the instrument display and status lights through the closed
door. A 1/4” inch compression fitting is provided for the sample inlet and outlet on all the
Series 106 Ozone Monitors. Multichannel inlet (3 or 6 channels) are offered as options.
This enclosure is not water resistant.
The Industrial enclosure is larger than the NEMA enclosure previously offered by 2B
Technologies, enabling easier access for maintenance and repairs.
2. INSTALLATION
Please refer to the following information when installing the enclosure. For assistance,
2B Technologies recommends that the Industrial Enclosure be mounted on a wall or
specially built stand. The enclosure weighs over 14 pounds with the ozone monitor
installed and requires a substantial mounting structure. The floor of the box should be
level when the box is mounted. The figures in this manual provide mechanical
dimensions for the Industrial Enclosure.
2.1. Mounting
The back of the enclosure has three holes at the top and three holes at the bottom for
mounting bolts (Figure 1). The holes are 1/4” in diameter and should be used with
stainless steel bolts and washers.
2.2. Power
The Industrial units are set up for AC
power via connection to an AC/DC
converter mounted on the baseplate
(red square in drawing). These units
are intended to be installed by
electricians using conduit to bring
electrical power to the unit. A 1/2"
conduit connector, supplied by the user,
should be installed on the enclosure
through the hole provided in the
enclosure bottom (red circle in
drawing). Alternatively, the customer can use a 12VDC power supply and bring the
power cable into the box through either a conduit fitting or a 1/2" cable gland. The
power requirement is 100-240 VAC, 50/60 Hz, 11-28 V DC, nominally 500 mA at 12 V
DC, 6 watt.
106 Industrial Installation Manual Rev. A-1
2
2.3. Inlet Manifold
The Industrial Enclosure is available in 3 configurations:
•Standard: A single gas inlet
•Multichannel 3-port: Three gas inlets (option, available when ordering)
•Multichannel 6-port: Six gas inlets (option, available when ordering)
The size of the Industrial Enclosure is the same for all three configurations. Figure 2a in
this manual shows each configuration.
Figure 1. Industrial Enclosure Dimensions
(Front View of standard single-port configuration).
106 Industrial Installation Manual Rev. A-1
3
Figure 2a. Industrial Enclosure
(Bottom View of standard single-, 3-, and 6-port configurations)
Figure 2b. Industrial Enclosure Dimensions
(Bottom View of standard single-port configuration).
Inlets
Inlet
Outlet
Outlet
Outlet
Inlets
106 Industrial Installation Manual Rev. A-1
4
Figure 3. Industrial Enclosure Dimensions
(Bottom View with Door Clearance).
106 Industrial Installation Manual Rev. A-1
5
2.4. Analog Output, Serial Communication, and Relays
Access to the analog output, serial communication and relays is on the inside of the
enclosure (Figure 4). The connections are made to the 8-position and 12-position
terminal blocks according to Figure 4 and Tables 1 and 2 below. Photos of the
connections are shown in Figure 5.
Figure 4. Connections to the Industrial Enclosure.
106 Industrial Installation Manual Rev. A-1
6
Table 1. 8-Position Terminal Block Connections: General I/O.
Pin #
Description
Wire Color
1
RS-232 transmitted Data (TXD)
Yellow
2
RS-232 received Data (RXD)
Brown
3
RS-232 signal ground (GND)
Black
4
Analog output, 4-20 mADC
Green
5
Analog output ground
Black
6
Analog output, 0-5 VDC
White
7
open
8
open
Table 2. 12-Position Terminal Block Connections: Relays.
Pin #
Description
Wire Color
1
Relay 1, open on alarm condition
Red
2
Relay 1, ground
Black
3
Relay 1, closed on alarm condition
Green
4
Relay 2, open on alarm condition
Red
5
Relay 2, ground
Black
6
Relay 2, closed on alarm condition
Blue
7
Relay 3, open on alarm condition
Red
8
Relay 3, ground
Black
9
Relay 3, closed on alarm condition
White
10
Relay 4, open on alarm condition
Red
11
Relay 4, ground
Black
12
Relay 4, closed on alarm condition
Brown
106 Industrial Installation Manual Rev. A-1
7
Figure 5. Photos of Terminal Connections.
106 Industrial Installation Manual Rev. A-1
8
3. GAS CONNECTIONS
The port labeled INLET and OUTLET are for connecting ¼" O.D. tubing. Be sure that
the sampling point is in a location where only the gas sample is directed to the
instrument and not any liquid or particulate matter.
CAUTION: USE ONLY MATERIALS SUITABLE FOR OZONE SERVICE. CONSULT
WITH 2B TECHNOLOGIES FOR ADVICE ON MATERIALS.
CAUTION: EXPOSURE TO OZONE IS HAZARDOUS. ENSURE THAT ALL GAS
CONNECTIONS ARE TIGHT AND THAT NO LEAKS EXIST.
4. MAINTENANCE
The Industrial enclosure requires minimum maintenance. Inspect the enclosure for
signs of leaks or damage. Clean the polyester surface with an appropriate cleaner.
CAUTION: Do not use abrasive cleaners on the window.
For the Model 106 instrument itself, refer to the Ozone Monitor user manual for the
recommended maintenance and service procedures.
Table of contents
