2C Displays Frame IT User manual

2C Frame IT Cinema
Flocked Frame Screen
Installation Manual
For more information please go to
www.2cdisplays.com.au
or call 1300 730 025
2C_FrameIT_Cinema_Flocked_Mar11_v1.1
Protecting Your Screen:
• Keepawayfromdirectsunlightor
 hightemperatures.
• Examineboththefrontandbacksurfaces 
 beforeretractingintothecasetomakesureitis
 freeofdust,dirt,insectsorotherforeignmatter.
• Useasoftbrushorclothtolightlyremoveany 
 foreignparticles.
Cleaning Your Screen:
• Donotuseanysolvents,chemicalsorabrasive
 cleanersonthescreensurface.
• Useamilddetergentwithwarmwaterto 
 removeanymarksonthesurfaceor
 screencase.
• Alwaysimmediatelydabthescreenwithasoft
 clothtoavoidsoapmarks.
• Donotscrubthesurface.
Warranty: 12 Months
Happy Viewing!
Thereisalockinglatchonthebottomwallmountonly.(Fig16)
Step 6
Up Bracket
Bottom Bracket
Secure Button
(Fig16)
Fixthemountsontothewallseparately.(Fig17-18)
(For95”-height(h)=1260mm&105”-height(h)=1430mm).
Step 7
Up Bracket
Bottom Bracket
h
(Fig17) (Fig18)
Hookscreenontothetopmountandbottommount.(Fig19-20)
Step 8
(Fig19) (Fig20)
Touninstallthescreen,pleasepressthelatchtowardsthe
walltoreleasebottomframefrombottommount,thenliftthe
screenalittletoreleaseittotallyfromtopandbottomgroove
ofthemounts.(Fig21-22)
Step 9
(Fig21) (Fig22)

Supplied
Layeachsectionoftheframesonatidyatsurface.(Fig1)
Step 1
Unfoldscreenfabricandinsertthetensioningbarsintothefab-
ricgrooves.(Fig8-10)
Step 4
Alignxinglugsandtheeyeletsprovidedonthefabric.Usingthe
tensioningbar,pullfabriceyeletsoverthelugs.(Tip:Arrange
horizontaltensioningbarsrstthensidetensioningbars).
(Fig11-15)
Step 5
SlideFixingLugsintogroovesonthereversesideofframes.
(Fig2-3)
Step 2
Insertbothhorizontalandverticalframesectionswiththecor-
nerstakes.Ensurealljointsaresquareandthenlockoffby
tighteningwiththescrewsprovided.(Fig4-7)
Step 3
Required (not supplied)
ElectricDrill
ScrewDriver Level 3xScrews
tosuitWall
HorizontalFrame(x2)
&VerticalFrame(x2)
FixingLug
95”x24/105”x28
SideTensioning
Bar(x2)
CornerBrackets
(x4)
10mmCorner
Screw
HorizontalTension-
ingBar(x2)
TopMount(x1)
BottomMount(x1)
∅ 5x40mmTapping
ScrewwithAnchor
(x8)
Horizontal Frame
Vertical Frame
(Fig1)
(Fig3)(Fig2)
Fixing Lug
(Fig4) (Fig5)
(Fig6) (Fig7)
Corner
Horizontal
Frame
Vertical
Frame
(Fig8)
(Fig9) (Fig10)
(Fig13)
(Fig14)
(Fig15)(Fig12)
(Fig11)