2connect CAM-VW7 User manual

Image Sensor: 1/3” CMOS
TV Lines: 700
TV System: PAL
Image: Mirror
Viewing Angle: 170 Degrees
Operating Voltage: 12V DC (Negative Ground)
Current Consumption: 37mA @ 13.8V
Enhanced Performance In Low Light: Yes
Waterproof Rating: IP69K
Operating Temperature: -40 Degrees C to +80 Degrees C
User Manual
Prior to Installation
Read the manual prior to installation. Technical knowledge is necessary for installation.
Please ensure you use the correct tools to avoid damage to the vehicle or product.
Connects2 can not be held responsible for the installation of this product.
Technical Support
Connects2 want to provide a fast and suitable resolution should you encounter any tech-
nical issues. With this in mind, when contacting Connects2, try to provide as much Infor-
mation as possible. This will speed up the process and help us to help you.
Please use our dedicated online technical support centre: support.connects2.com
Volkswagen Twin Rear Door Camera
Volkswagen Transporter T5/T6
PRODUCT FEATURES:
DISCLAIMER:
CAM-VW7

www.connects2.com
2
Connects2Vision
CONTENTS
- Camera with 1m cable to mini Male 4pin connector
- Camera connection cable with mini Female 4pin connector to Male 4pin
connector
- Instructions
INSTALLATION
1. Remove the relevant brake light housing from the vehicle and carefully remove
the bulbs/bulb holder assembly.
2. Insert the bulbs/bulb holder assembly into the CAM-VW7 and ret to the vehicle
taking care not to trap any cables.
3. Connect the camera cable to the camera connection cable.
4. Connect the camera connection cable to the display monitor using an exten-
sion/4pin to RCA convertor cable and ensure that the image is displayed correctly.
Subscribe to our YouTube Channel for installation
guides and tips... www.youtube.com/connects2