2E G3422B User manual

LCD
MONITOR
СВІТЛОДІОДНИЙ
МОНІТОР
СВЕТОДИОДНЫЙ
МОНИТОР
G3422B
User Manual
Read this manual carefully before use.
.
.
www.2egaming.com

– 2 –
EN
Content
WARNINGS/SAFETY PRECAUTIONS
WARNINGS
ATTENTION
Important safety instructions
OPERATING INSTRUCTIONS
Components and auxiliary equipment
INSTALLATION
Installation of base
Installation of mount
FUNCTIONS
Description of connection sockets
Power indicator
Description of buttons
OSD MENU
Menu description
Specifications
Troubleshooting
Additional information
Warranty
3
3
3
4
5
5
6
6
7
8
8
8
8
10
10
13
14
14
44

– 3 –
EN
Warnings/Safety precautions
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNINGS/SAFETY PRECAUTIONS
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER AND BACK PANEL THERE
ARE NO USER-SERVICEABLE PARTS
INSIDE.
I CASE OF DAMAGE OR ERROR REFER SERVICING
TO QUALIFIED PERSONNEL.
Lightning flash with arrowhead symbol
within an equilateral triangle is intended
to alert the user to the presence of
non-insulated dangerous voltage within
the product’s enclosure that may be of
sufficient magnitude to constitute a risk
of electric shock in case of improper
usage of the product.
Exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance instructions in the literature
accompanying the product.
WARNING:
Do not put the monitor in rainy or foggy places to prevent from fire or electric shock.
To prevent scratches or damages to the LCD screen, do not knock, apply or rub the surface with sharp
or hard objects or stiff cloths as well as try not to touch the LCD screen with your hands.
Any modifications to this product that have not been clearly and explicitly approved in advance by the
manufacturer responsible for compliance with these regulations are forbidden.
ATTENTION:
Excessive sound pressure from earphones and headphones can cause hearing loss.

– 4 –
EN
Important safety instructions
1. Please read all the instructions carefully before using this product.
2. The instructions should be retained after reading for future reference.
3. Please immediately pull out the AC power plug from an adapter if there is an abnormal sound or
smell or the monitor has no picture, and contact after sales support.
4. The monitor should be kept free from rain, damp and dust to prevent electrical shock and short
circuits. Do not cover the ventilation openings with table clothes, curtains, newspapers etc.
5. The monitor should be kept away from heating objects or direct sunlight. This product requires
good ventilation. Allow 10 cm between the monitor and other appliances or built-in cabinet walls.
6. You may clean the display panel with a soft clean cloth after pulling out the power plug. Do not
repeatedly wipe the panel, nor scrape, tap or strike the panel with hard objects, etc.
7. Do not wipe the monitor with any petrol chemical or alcohol-based solvents, as it will lead to
product damage to the panel and cabinet.
8. Do not place the monitor on an unstable surface.
9. Do not place the power cord or other cables across a walkway in case it is trampled on, especially at
the points of connection to the plug, sockets and the power cord to the appliance.
10. Unplug the appliance during a lightning storm or when it is not used for a long period of time.
11. Unplug this product when the device, power cord or plug are damaged or if the device has been
exposed to liquid or moisture, has been mechanically damaged and does not work properly and
contact an authorized service centre immediately.
12. Keep this appliance away from liquids, splashes of water and do not place objects filled with liquids
on it.
13. Do not disassemble the back cover as it contains high voltages inside and will cause electric shock.
There is no spare parts inside. Internal adjustments and checks should only be conducted by
qualified professionals.
14. Do not place naked flame sources, such as lit candles on or near the monitor. Please pull out the
power plug and contact after sales support if there are abnormal objects or water in the monitor.

– 5 –
EN
Operating Instructions
Components and auxiliary equipment
Before assembling and installing, check for following items to be included in this display package.
45
45
45
45
45
45
45
Monitor x 1
Screws x 3
Stand stem x 1
Mount hexagon irons x 4 DP signal cable x 1
Base x 1
45
Power adapter x 1
User manual x 1
Power adapter
7
m
m
Redundant screws can be used as spare screws.
45
45
Microfiche and power
requirements label

– 6 –
EN
Installation
1. Open the package and take out the product with the foam still attached. Gently place
it on a desktop or table.
2. Remove the polyfoam and the inner package bag, place on a desktop or table, keep the
lower foam underneath the monitor.
3. See picture, fasten the stand stem and base with a screw.
4. Press the button to remove the stand plate, Fix the stand plate into the stand stem with
the supplied screws.
5. Fix the whole assembled stand into the monitor, and check carefully to make sure it is
fastened.
6. Hold onto the stand stem and stand the monitor up on a flat, level desktop or table.
Due to the heavy weight and dimensions of the LCD screens and their fragile nature,
we recommend that they are unpacked and assembled by 2 people. The stand can be
removed from the rear of the monitor by pressing the quick release button on the rear
of the monitor.
Press the button to remove the stand plate, Fix the stand plate into the stand stem with the supplied

– 7 –
EN
Installation
1. Open the package and take out the product with foam still attached Gently place it on
a desktop or table. Remove the parts and the foam covering the monitor. If the monitor
is already attached to the stand, remove the stand.
2. Press the button to remove the adapter on back of monitor, then tighten the included
four screws onto the mounting holes on back of monitor.
3. Install the monitor on the wall, mount, or fixture as desire.
4. During padlocking of the monitor, do not pinch the screen with the hands to avoid
damaging the screen. Install the mount to the mount stud by referring to the user
manual of the mount (purchased separately).
Tips: The mounting hole distance of the mount for the product is 75x75mm.
Do not place or hang any object on the mount, and the using height of the mount should
be less than 2 meters.
Notes: To prevent the monitor on the mount from failing, please install it firmly and
protect it fully.
Do not place or hang any object on the mount, and the using height of the mount
should be less than 2 meters.
Mount hexagon irons
Mount
(Not included)

– 8 –
EN
Functions
Description of connection sockets
Power indicator
Description of buttons
1 2 3 4 5 6
Indicator: A steady blue light indicates that the power is on and the monitor is operating
normally. Blue light flashing to indicate There is no video source and no horizontal or
vertical signal or low voltage is detected. Make sure your computer It is turned on and all
video cables are fully plugged in and/or connected.
HDMI interface
Use the HDMI cable to connect the HDMI IN interface
of the product to the HDMI OUT interface of aPC.
Use the HDMI-DVI cable to connect the HDMI IN interface
of the product to the DVI OUT interface of aPC.
(In general, PCs do not transfer video signals to the
monitor through the DVI OUT interface, and it is
necessary to connect aloudspeaker box additionally to
play sounds of PCs.)

– 9 –
EN
Button Function
Menu: Press to display OSD menu and enter sub-menus
Down: Press to move down in menus
Up: Press to move up in menus
Exit: Press to exit OSD menu
Power: Press to turn monitor on/o

– 10 –
EN
OSD menu
Menu description
• The color and shape of the OSD menu of the actual computer may be slightly different
from them shown in the figure.
• Specifications of the OSD menu may change with improvements of functions without
prior notice.
The screen display (OSD) menu can be used to adjust settings of the monitor and is shown
on the screen after the monitor is powered on and the
used t
e
(H
(Home) button is pressed.
1. Press one of the buttons (
)
) to activate the browser screen.

– 11 –
EN
2. Press (
used t
e
(H
) to enter the OSD screen.
3. Press or to scrollthrough the functions.
• Select the desired function, and press
used t
e
(H
to enter the sub-menu.
• Press or to scroll through sub-menus, and press
used t
e
(
key to select and confirm the
desired function.
• Pres or to select one option, and press
used t
he
(
to confirm settings and exit from the
current menu.
4. Press
ss
to
to exit from the menu screen.

– 12 –
EN
Level1 Level2 Level3
Input Source
DP1(1.4)
DP2(1.4) —
HDMI1(2.0) —
HDMI2(2.0) —
Brightness/Contrast
Brightness (Adjustment Bar; Range: 0 - 100) Default 80
Contrast/Blacklevel (Adjustment Bar; Range: 0 - 100) Default 50
DCR On / O
Color Setting
Gamma 1.8 / 2.0 / 2.2 / 2.4 / 2.6
Pictrue Mode Standard / Photo / Movie / Game / FPS / RTS
Color Temperature Warm / Cool / USER
Low Blue Light (Adjustment Bar; Range: 0 - 100) Default 0
Hue Hue (Adjustment Bar; Range: 0 - 100) Default 50
Saturation Saturation (Adjustment Bar; Range: 0 - 100) Default 50
Picture Quality Setting
Sharpness (Adjustment Bar; Range: 0 - 100) Default 50
Response Time O / High / Middle / Low
Noise Reduction O / High / Middle / Low
Super Resoultion O / High / Middle / Low
Dynamic Luminous
Control/MPRT On / O
Display Aspect Ratio Wide Screen / 4:3 / 1:1 / Auto
LedMode Normal / O / Flicker
Audio
Mute On / O
Volume (Adjustment Bar; Range: 0 - 100) Default 50
Audio Source HDMI1(2.0) / HDMI2(2.0) / DP1(1.4) / DP1(1.4)
Multi-Window
Multi-Window O / PIP Mode / PBP 2Win
Sub Win2 Input DP1(1.4) / DP2(1.4) / HDMI1(2.0) / HDMI2(2.0)
PIP Size Small / Medium / Large
PIP Position TopRight / TopLeft / BottomRight / BottomLeft
Swap —
OSD
Language English / / …..
OSD H-Position (Adjustment Bar; Range: 0 - 100) Default 50
OSD V-Position (Adjustment Bar; Range: 0 - 100) Default 50
OSD Transparency (Adjustment Bar; Range: 0 - 100) Default 20
OSD Time Out (Adjustment Bar; Range: 0 - 100) Default 20
OSD Rotation Normal / 90 / 180 / 270
Other
DP Version DP1.1 / DP1.2/ DP1.4
FreeSync(Adaptive Sync) On / O
HDR On / O/ Auto
Reset —
Functions OSD menu

– 13 –
EN
Specifications
Model G3422B
Screen size 34’’ Curve (R1500)
Matrix type VA
Aspect ratio 21:9
Viewing angles 178 °/ 178 °
Displayable colours 16.7M (8-bit)
Resolution 3440x1440
FPS 165 Hz
Response time 1ms MPRT
Brightness 350 cd/m2
Contrast 3000:1
Interfaces xHDMI (.), xDP (.), Audio out
Built-in speakers Yes
Screen tilt -5°~+15°
Height adjustment 100mm
Screen rotation 15°(± 2°)
HDR support HDR400
External power adapter parameters 100-240 V, 50/60 Hz, 2.0 A
Power consumption in operating mode
(max) <80W
Standby power consumption ≤0.5W
Wall mounting 7575
Package dimensions 907x182x486 mm
Weight (NET/GROSS): 7.72 kg/10.32 kg
Sync technology Adaptive-Sync
Additional Information Low Blue Light
Flicker Free

– 14 –
EN
Troubleshooting
Problem Solution
Power cannot be turned on Check that both ends of the power cable are plugged into the socket
appropriately and the wall socket is operational
No Input signal message
Check that the signal line is connected properly.
Check that the power of the relevant peripherals is turned on.
Check that the Input option tnat has been selected matches with the
input signal.
Image colour or quality
deteriarates
Check that all the video settings are adjusted appropriately, such
as brightnešs, contrast, colour etc.
Display warning message Check that the input signal line is properly xed.
Select the correct input signal source
Additional information
The production date is encrypted in the serial number in the format
ERC2E *** YYYYMMDD *******, where: YYYYMMDD - year, month and day of production.

– 15 –
UA
Зміст
ПОПЕРЕДЖЕННЯ/ЗАПОБІЖНІ ЗАХОДИ
Основні правила з техніки безпеки
ІНСТРУКЦІЯ З ЕКСПЛУАТАЦІЇ
ВСТАНОВЛЕННЯ
ФУНКЦІОНАЛ
’
Роз’яснення до кнопок управління
на корпусі монітора
МЕНЮ
Технічні характеристики
Усунення основних несправностей
Додаткова інформація
Гарантія
16
16
16
17
18
18
19
19
20
21
21
21
21
23
23
25
27
28
28
45

UA
Попередження/Запобіжні заходи
Р
ИЗИК УРАЖЕННЯ ЕЛЕКТРИЧНИМ СТРУМОМ!
НЕ ВІДКРИВАТИ
ПОПЕРЕДЖЕННЯ/ЗАПОБІЖНІ ЗАХОДИ
-
.
.
.
-
-
, -
.
-
,
.
ПОПЕРЕДЖЕННЯ:
, -
.
, -
, -
.
,
-, , .
УВАГА
, .

UA
Основні правила з техніки безпеки
1. .
2.
.
3. /, -
,
, ’
.
4. , , ,
.
. , -
, .
5. ,
. .
, , 10 .
6. ’ ,
. ,
, , .
7. , ,
, .
8. .
9. , ,
, ’ , ’-
.
10.
.
11. , , ,
,
, .
12. , ’,
.
13. ,
. -
, .
.
14. / ’, . , ’-
’ ,
.

– 18 –
UA
Інструкція з експлуатації
Комплектація та допоміжне обладнання
.
45
45
45
45
45
45
45
1
x3
1
x4
DP 1
1
45
1
1
Power adapter
7
m
m
Встановлення
Встановлення основи
Відкрийте коробку та дістаньте монітор із пакувальними матеріалами Обережно покладіть
його на робочуповерхню або стіл.
Зніміть пінопласт і внутрішню обгортку, покладіть на робочу поверхню або стіл, коробку
тримайте під монітором.
Закріпіть стійку та основу гвинтом, як зображено на малюнку нижче
Натисніть кнопку, щоб зняти панель підставки. Закріпіть пластину підставки на штоку
підставки гвинтами, що входять у комплект.
Закріпіть всю зібрану підставку на моніторі та ретельно перевірте, чи вона закріплена
Візьміться за ніжку підставки та поставте монітор на пласку рівну робочу поверхню або стіл.
Через велику вагу та розміри екрану ми рекомендуємо, щоб до розпакування та збирання
пристрою було задіяно декілька людей
Підставку можна зняти із задньої частини монітора, натиснувши кнопку швидкого зняття на
задній панелі монітора.
45
45

– 19 –
UA
Встановлення
Встановлення основи
1. .
.
2. , ,
.
3. , .
4. , .
, .
5. ,
6.
. ,
.
,
.
Press the button to remove the stand plate, Fix the stand plate into the stand stem with the supplied
Встановлення
Встановлення основи
Відкрийте коробку та дістаньте монітор із пакувальними матеріалами Обережно покладіть
його на робочуповерхню або стіл.
Зніміть пінопласт і внутрішню обгортку, покладіть на робочу поверхню або стіл, коробку
тримайте під монітором.
Закріпіть стійку та основу гвинтом, як зображено на малюнку нижче
Натисніть кнопку, щоб зняти панель підставки. Закріпіть пластину підставки на штоку
підставки гвинтами, що входять у комплект.
Закріпіть всю зібрану підставку на моніторі та ретельно перевірте, чи вона закріплена
Візьміться за ніжку підставки та поставте монітор на пласку рівну робочу поверхню або стіл.
Через велику вагу та розміри екрану ми рекомендуємо, щоб до розпакування та збирання
пристрою було задіяно декілька людей
Підставку можна зняти із задньої частини монітора, натиснувши кнопку швидкого зняття на
задній панелі монітора.
Встановлення
Встановлення основи
Відкрийте коробку та дістаньте монітор із пакувальними матеріалами Обережно покладіть
його на робочуповерхню або стіл.
Зніміть пінопласт і внутрішню обгортку, покладіть на робочу поверхню або стіл, коробку
тримайте під монітором.
Закріпіть стійку та основу гвинтом, як зображено на малюнку нижче
Натисніть кнопку, щоб зняти панель підставки. Закріпіть пластину підставки на штоку
підставки гвинтами, що входять у комплект.
Закріпіть всю зібрану підставку на моніторі та ретельно перевірте, чи вона закріплена.
6. Візьміться за ніжку підставки та поставте монітор на пласку рівну робочу поверхню або стіл.
Через велику вагу та розміри екрану ми рекомендуємо, щоб до розпакування та збирання
пристрою було задіяно декілька людей
Підставку можна зняти із задньої частини монітора, натиснувши кнопку швидкого зняття на
задній панелі монітора.

– 20 –
UA
Монтування кріплення
1. .
. ,
. ,
.
2. , ,
, ,
.
3. , .
4. ’ ,
.
( ).
Поради: 75x75 .
Порада: ,
.
Не вішайте жодних сторонніх предметів на кріплення, а використовувана висота
кріплення має бути менше 2 метрів.
Mount hexagon irons
Mount
(Not included)
( )
Table of contents
Languages:
Other 2E Monitor manuals