2SAN ADR-7008 User manual
Digital Video Recorder
ADR-7008
Quick Installation Guide
Version 1.0
Copyright © 2007 2SAN INC.
Release: September 2007
Copyright and Trademark
The information of the product in this quick guide is subject to change without prior
notice and does not represent a commitment on the part of vendor, who assumes no
liability or responsibility for any errors that may appear in this quick guide.
2SAN is the trademark of 2SAN INC. Windows is the trademark of Microsoft Corporation.
All brands and trademarks are the properties of their respective owners.
This quick guide contains materials protected under International Copyright Laws. All
rights reserved. No part of this quick guide may be reproduced, transmitted or
transcribed without the written consent of the manufacturer.
WEEE Statement English
In order to cope with the increasing waste electrical and electronic equipment, reduce the use of landfill and
incinerator, and prevent the harmful matter of waste equipment from entering the environment, the European
Union (EU) has set the Directive on Waste Electrical and Electronic Equipment (WEEE) asking manufacturers
to collect, recycle and treat waste electrical and electronic equipment properly. Member nations already
established their free of charge recycle systems of WEEE before August 13, 2005. Accordingly, 2SAN has to
be responsible for recycling all products exported to Germany. You can return your 2SAN product that needs
recycling to a local collector.
WEEE Erklärung German
Mit dem Ziel die steigende Menge elektrischer und elektronischerAltgeräte zu bewältigen ohne hierzu unnötig
Mülldeponien und Verbrennungsanlagen zu belasten und um die Verschmutzung der Umwelt durch
freiwerdende Stoffe aus den Altgeräten zu vermeiden, hat die Europäische Union (EU) die Richtlinie über
Elektro- und Elektronik-Altgeräte erlassen. Die Richtlinie verpflichtet Hersteller, elektrische und elektronische
Altgeräte umweltgerecht einzusammeln, zu recyceln und zu entsorgen. Die Mitgliedsstaaten der EU haben
bereits ihre kostenfreien Recyclesysteme konform der WEEE vor dem 13. August 2005 eingerichtet.
Entsprechend der Richtlinie ist 2SAN verantwortlich für die umweltgerechte Entsorgung aller nach
Deutschland exportierten 2SAN Produkte. Sie können Ihr zu entsorgendes 2SAN Produkt zu Ihrer örtlichen
Sammelstelle bringen.
AEEAverklaring Dutch
Met het doel de stijgende hoeveelheid afgedankte elektrische en elektronische apparatuur te beheersen
zonder hiervoor onnodig stortplaatsen en verbrandingsovens te belasten en om de vervuiling van het milieu
door vrijkomende stoffen uit de afgedankte apparatuur te voorkomen, heeft de Europese Unie (EU) de richtlijn
betreffende afgedankte elektrische en elektronische apparatuur besloten. Deze richtlijn verplicht fabrikanten
afgedankte elektrische en elektronische apparatuur in te zamelen, te recyclen en te verwijderen. De lidstaten
van de EU hebben reeds de kosteloze recyclesystemen volgens de AEEAvóór de 13 augustus 2005 ingericht.
Conform de richtlijn is 2SAN verantwoordelijk voor de verwijdering van alle naar Nederland geëxporteerde
2SAN producten. U kunt uw afgedankt 2SAN product naar uw locale inzamelplaats brengen.
Elektrik ve Elektronik Madde AtıklarıDemeci Turkish
Elektrik ve electronik madde atıklarının yukselmesiyle basedebilmek ,arazi doldurma ve cop yakma fırını
kullanımınıazaltmak,atık madde zararlarının cevreye yayılmasınıonlemek icin Avrupa Birligi
(AB),ureticilerden elektrik ve elektronik madde atıklarınıgerektigi gibi toplamalarını,geri donusturmelerini ve
kimyasal isleme tabi tutmalarınıtalep etmek icin Elektrik ve Elektronik Madde Atıklarıuzerine bir direktif
hazırladı.Topluluk uyeleri,13 Agustos 2005' ten once elektrik ve elektronik madde atıklarının ucretsiz geri
donusum sistemlerini coktan olusturmuslardı.Bundan dolayı, 2SAN, Almanya'ya ihrac ettigi butun urunlerin
geri donusumunden sorumludur. 2SAN urunleri geri donusum gerektirirse yerel toplayıcılara geri
verebilirsiniz.
WEEE бюлетень Russian
Чтобы справиться сувеличивающимся ненужным электрическим иэлектронным
оборудованием, уменьшите использование закапывания мусора ииспользования установки
для сжигания отходов, препятствуйте вредному выбросам загрязнять окружающую среду,
Европейский союз (ЕС)установил Директиву по Ненужному Электрическому и
Электронному Оборудованию (WEEE) для того, чтобы изготовителей собрали,
перерабатывали ивообще проявили внимание кненужному электрическому иэлектронному
оборудованию должным образом. Члены нации установили бесплатную систему переработки
WEEE до 13 августа 2005. Соответственно, 2SAN обязан быть ответственным за то, что
переработал все продукты, экспортируемые вГерманию. Вы можете возвратить ваш продукт
2SAN, который нуждается врециркуляции местному сборщику.
WEEE Statement French
Afin de gérer la quantité croissante de déchets électriques et électroniques, de réduire l’utilisation des
décharges et des incinérateurs et d’éviter que des déchets nocifs ne polluent l’environnement, l’Union
Européenne a publié la directive WEEE sur les déchets électriques et électroniques. Celle-ci spécifie que les
fabricants doivent collecter, recycler et traiter l’équipement électronique et électrique usagé. Depuis le 13 août
2005, les pays membres ont mis en place un système de recyclage gratuit selon le WEEE.
De ce fait, 2SAN est responsable du recyclage de tous les produits exportés vers l’Allemagne. Vous pouvez
mettre au rebut votre équipement 2SAN usagé dans votre centre local de recyclage.
Pour plus d’informations sur les lieux de mise au rebut des équipements usagés destinés au recyclage,
veuillez contacter votre mairie, votre service de traitement des déchets ménagers ou le magasin où vous avez
acheté le produit.
RAEE Spanish
Con la finalidad de reducir el incremento de residuos eléctricos y de material electrónico, reduciendo el uso
de los vertederos e incineradoras y prevenir el preocupante aumento del contacto de estos residuos con el
medio ambiente. Por este motivo la Unión Europea ha fijado la Directiva de Residuos de Aparatos Eléctricos
y Electrónicos (RAEE) solicitando a los fabricantes la recolección, reciclaje y tratamiento de ests residuos
correctamente. Los paises miembros ya han establecido su sistema de reciclaje gratuito de RAEE antes del
13 de Agosto del 2005. Por este motivo 2SAN es el responsable del reciclaje de todos los productos
exportados aAlemania. Usted puede devolver su producto 2SAN a un punto de recogida local cuando desee
reciclarlo.
DichiarazioneWEEE Italian
Per far fronte all’aumento dei residui delle apparecchiature elettriche ed elettroniche, ridurre l'uso di materiale
di riporto e degli inceneritori, ed impedire che il materiale nocivo delle apparecchiature residue entri a contatto
con l'ambiente, l’ Unione Europea (UE) ha stabilito le Direttive sui Residui delle apparecchiature Elettriche ed
Elettroniche (WEEE) chiedendo ai fornitori di raccogliere correttamente, riciclare e trattare le apparecchiature
elettriche ed elettroniche residue. Le nazioni facenti parte dell’ Unione Europea hanno già stabilito il loro
sistema gratuito di riciclaggio di questo materiale (WEEE) prima del 13 agosto 2005. Di conseguenza, 2SAN
è responsabile del riciclaggio di tutti i prodotti esportati in Germania. Potete restituire il vostro prodotto
acquistato da 2SAN che deve essere riciclato da un’ azienda specifica locale.
Table of Contents
1. INTRODUCTION.......................................................................................................................6
1.1 PRODUCT OVERVIEW ..........................................................................................................6
1.2 SPECIFICATION.....................................................................................................................6
2. QUICK INSTALLATION..........................................................................................................8
2.1 PACKAGE CONTENTS...........................................................................................................8
2.2 HOW TO INSTALL..................................................................................................................8
2.3 PANEL FUNCTIONS...............................................................................................................9
3. THE FIRST TIME TO USE ....................................................................................................12
3.1 INTERNAL HDD INSTALLATION.......................................................................................12
3.2 HOT-SWAP HDD INSTALLATION ....................................................................................14
3.3 HOW TO RECORD................................................................................................................15
3.4 HOW TO PLAYBACK............................................................................................................17
3.5 USER ACCOUNT..................................................................................................................17
3.6 FIRMWARE UPDATE............................................................................................................19
6
1. Introduction
1.1 Product Overview
Digital technology for DVR (Digital Video Recorder) represents the
better recording quality, control and functionality as well as remote
viewing. Unlike PC-based DVR, 2SAN’s embedded DVR enjoys much
more benefits that contain NO software at all on the hard drives, but
being installed in the flash memory on the board. It indicates more
stability and reliability.
1.2 Specification
Video / Audio
Video Compression MPEG4
Video Inputs 8 camera inputs (BNC)
Video Outputs z1 BNC video out for main monitor
z8 BNC video out for looping
Audio Input / Output 1 Input / 1 Output
Video Resolution NTSC 720 x 480 / PAL 720 x 576 pixels
Monitoring Mode Full screen, Quad, 8-spilt & 9-split modes
Alarm
Alarm Inputs 8
Alarm Outputs 2
Recording
Recording Rate NTSC: 30 fps
PAL: 25 fps
Recording Mode Menu, Alarm, Motion & Schedule
Storage
Internal Storage z2 built-in SATA HDDs (optional)
z1 hot-swap SATA HDD (optional)
External Storage Up to 4 SCSI RAID
External Expansion zUSB interface
zSCSI interface
zDVD writer (for archiving)
Connectors
Ethernet Provides two sets of RJ45 sockets for connecting
7
to the network
RS-485 zFor PTZ control (supports Pelco-D, Pelco-P &
EYEVIEW protocols)
Others
Temperature for operation 0°C ~ 40°C
Power Supply 100-240V AC; 50-60 Hz; 220W
Dimension (mm) 430 (W) x 85 (H) x 401 (D)
8
2. Quick Installation
2.1 Package Contents
Digital Video Recorder
Quick installation guide
Power supply cord
RS-485 connector
Mount bracket
2.2 How to install
STEP 1. Connect cameras
Connect cameras to the video BNC inputs marked Video In
1~8. Use the bottom row of video BNC outputs for looping
video signal to other input devices.
STEP 2. Connect monitor
Connect the video BNC output marked Main Mon to the
monitor.
STEP 3. Connect internal hard drives
Supports two internal hard drives. Connect SATA cables from
SATA0 connector to Disk A and SATA1 connector to Disk B.
STEP 4. Connect hot-swappable hard drive (SMART COPY
Disk)
Supports one hot-swappable hard drive. Connect SATA cable
from SATA2 connector to the hot-swappable disk.
STEP 5. Connect external DVD writer (optional)
Connect IDE cable from IDE slot marked CD/DVD to DVD
writer.
STEP 6. Connect power
Make sure that all devices are ready before connecting power
cord to PSU, and then power on. The boot procedure takes
around a minute before ADR-7008 can be operated.
SATA2 (Hot-swappable disk)
SATA0 & SATA1
CD/DVD
9
2.3 Panel Functions
Front Panel
Tray lock
LED Indicator Function
Power Shows power on/off status
REC Shows the recording status
LIVE Shows the live view
PLAY Shows playback in operation
ALARM Lights when event occurs
FULL Lights when the HDD is full
PTZ Lights when you control a PTZ camera
HDD Shows the normal access to HDD
No. Name Function
1 REC/STOP
Press to operate in toggle for Record/Stop while
recording.
2 SEARCH
Search
Press to search stored video recordings.
3 REW
__
Press to rewind playback of selected video
recording. Repeat pressing it will change the
rewind-rate among 2x 4x 8x and 16x.
LED indicators
1~8 Channel buttons
Function keys
Menu & Arrow keys
Record & Playback
LCD Panel
Hot-Swap Tray
HDD LEDs
Power
USB
10
4 PAUSE
Press to freeze the screen.
5 FF
``
Press to forward playback of selected video
recording. Repeat press it will change the
forward-rate among 2x 4x 8x and 16x.
6 PLAY/STOP
`/
Press to operate in toggle for Play/Stop while
playback.
7 JOG
Press to playback in slow motion.
8 LOCK
LOCK
Press to lock all buttons except channel key, Mode
key and DWELL key.
9 MODE Press to change different display modes.
10 DWELL
Press to set up the DWELL time.
11 PIP Press to show the live screen under the playback
mode.
12 ACK
ACK
Press to acknowledge an alarm.
13 Functions
F1/F2
Reserved.
14 Pan / Tile / Zoom
PTZ
Press to control a PTZ camera.
15 Menu
Menu
Press to configure the system setups.
16 Escape
ESC
Press to escape to the upper menu.
17 Channel
1~8
In live mode, use one of the buttons to select a
channel.
In PTZ mode, use one of the buttons to control a
PTZ camera.
18 USB For firmware update
11
Rear Panel
No. Name Function
1 Video In Connect to the cameras.
Loop Loop the video signal.
2 Main Mon Connect to the monitor.
Call Mon Quad composite video output
3 Audio In / Out Input / Output audio signals.
4 RS-485 Used to communicate with PTZ cameras.
5 RS-232 Reserved
6 Network
Two sets of RJ45 sockets for connecting to the
network.
7 USB For firmware update.
8 SCSI
68-pin high density Ultra160 SCSI port for
connection of the external storage system.
9 Alarm Out
Alarm output connector, sending alarm signals to
external devices
10 Alarm In
Alarm input connector, receiving alarm signals from
outside.
11 110V ~ 240V AC Power supply
1 2 3
4 5 6 7 8 9 10 11
12
3. The first time to use
3.1 Internal HDD installation
1. Loosen these three screws on the rear panel.
2. Remove the cover. (Push the cover back before lifting it )
3. Loosen these four screws on the HDD bracket and take the
bracket out.
13
4. Mount and tighten the HDD to the bracket.
5. Put the bracket back to the case and tighten it.
6. Connect the SATA and power cables.
Disk A（SATA0）
Disk B（SATA1）
14
3.2 Hot-Swap HDD installation
1. Unlock the hot-swap tray and then pull it out.
2. Put aHDDinto the trayand fixthe HDDwith screws.
3. Push the tray back to the case and lock it.
15
3.3 How to record
First, set the system time to local time. Press the MENU button, select
System and then Time. The items should be set as follows:
Date display: YY/MM/DD, MM/DD/YY, DD/MM/YY.
Time format: 12 hours / 24 hours.
System date setting: modify the system date.
System time setting: modify the system time.
Default: return to the original preset value.
Second, make sure that the hard drives are firmly connected and then
power on. All hard drives should be formatted by the DVR before use.
Follow the instructions below.
STEP 1. Press the MENU button to enter system setups. Move the
cursor to “Disk Manager” via the up/down (©,ª) arrow keys.
16
STEP 2. Select “Disk Utility” item.
STEP 3. Select “Disk Format” item.
STEP 4. Move the yellow cursor by using the up / down arrow keys
(©,ª) and select hard drives by using the right arrow key (¨).
Then press “Begin format” button to format. When formatting
completed, a message will show up.
STEP 5. Press the REC/STOP button to record.
L“REC” will show on the right top.
17
3.4 How to Playback
Press the Search key to play back. There will be appearing a menu of
date range as year / month / day / hour / minute / second. Use up and
down arrow keys to select the range, and use left and right arrow keys
to change the set value. Besides, you can quickly search the historical
video or playback video according to the type.
From: set the beginning time.
To: set the closing time.
CAM: The number of the camera from which you want to play back (01
~08).
Type: There are four types of playback files.
Manual: manual recording
Alarm: alarm recording
Schedule: schedule recording
Motion: motion detection recording
3.5 User Account
The user account is exclusively set for the administrator to control all
functions of the DVR. Its default is 12345678. It protects the DVR as
the Lock key does.
[Modify the Password]
Press the Menu key to choose “User Account” and then “Modify”.
18
Use §,¨to change the characters (0~9 or A~Z or both), and use ©,ª
to move the characters. A password can be composed of 10
characters at most. When modifying, you have to key in the original
password first, and press the Enter key to confirm. Then, key in a new
password and press the Enter key to confirm. Input the new password
again, and press the Enter key. The system will tell you that the
password has been changed.
LYou’re suggested to change the default and keep the new
password before use.
[Lock]
After setting up the DVR in the authority of administrator, press the
Lock key to protect the machine. In operation or modification, you
should press the Lock key again. The system will ask you to input the
password. If you fail to input a correct one, the system won’t let you
login.
LWhen you press the Lock key, you can still use the channel keys,
the MODE key and the DWELL key.
19
3.6 Firmware Update
Download the latest firmware from 2SAN web site
http://www.2SAN.com. This file will be in the RAR format. Extract it to
the USB flash drive. (Empty your flash drive first)
STEP 1. Power on the DVR.
STEP 2. After booting and the LCD shows “Ready＂, insert the
USB flash drive to the USB port. It will update the DVR
automatically in a few minutes.
STEP 3. The system will ask if you want to update the firmware.
Choose “Yes” and begin to update.
LBefore updating the firmware, you need to confirm the
administrator’s password first.
STEP 4. The system will show the update as “Update FW-1 xxx%”
and “Update FW-2 xxx%” respectively. Here xxx% means the
progress percentage.
STEP 5. The system will shut down automatically after the
successful update.
LDo not turn off the power or remove the flash drive during the
firmware update in order to secure normal operation.
System Configuration
Motherboard
BIOS version
SCSI adapter
Chipset
Memory
Display card
Other I/O cards
OS Version
Hard drive configuration
Hard drive model
Capacity
Firmware version
Others
Problem description:
Table of contents
Other 2SAN DVR manuals
