360 E1 User manual

E1
Quick Start Guide

EN
01 Functions 02 SIM Card Specications
IPX8 waterproof
Unnecessary to take the wrist
phone o while washing or
swimming
Positioning
Accurately positioning
kids any time and any place
●Thank you for choosing 360 Kids Smart watch！
The wrist phone supports 4G network. Make sure a SIM card is inserted.
(1) Make sure the calling line identication presentation service has been
activated.
(2) Make sure the Internet service has been activated, with the data traic
of 200 MB and above.
(3) Make sure the 4G service has been activated.
●For a new SIM card, please activate it by inserting the SIM card into the
wrist phone or with the help of the carrier.
●Please use a standard Nano card (do not independently cut the card
using a card cuer).
Camera
2-megapixel camera
One-buon SOS
Asking for help with one buon
Pedometer
Caring kids' health
Large baery capacity
Large baery capacity of 800
mAh
HD screen
1.4-inch HD large screen with
clear and vivid color
Smart PA
Saturated sound
Common SIM Card Micro SIM Card
Nano SIM Card
（for the Smart watch）

03 Buon Description and Card Loading Guidelines 04 Downloading and Installing the App
05 Activation Process
Power buon
(1) In the shutdown state, if you press and hold the
Power buon, the Smart watch is powered on.
(2) In the startup state, if you press the Power buon,
the Smart watch goes back to the home screen.
(3) If you press and hold the Power buon for 6s, the
Smart watch initiates an SOS alarm.
●Scan the following QR code to download and install 360 Kids Smart Watch
App.
Procedure:
(1) Properly insert the SIM card.
(2) Ensure that the baery is suicient. If the Smart watch cannot start up due
to insuicient baery connect the Smart watch and the charger using a
magnetic charging cable. Charge the Smart watch for more than 15 minutes.
●
●
Card loading procedure
(1) In the shutdown state, take out the SIM card from the card tray using an
ejection tool.
(2) Place the standard Nano SIM card in the card tray and then insert the SIM
card tray into the device.
EN
Power buon
Nano SIM card
SIM card tray
Chip faced up

06 Binding Process
Important
(3) Scan the QR code in the app to activate the Smart watch
If the activation fails, check the following:
(1) Check whether the Smart watch is powered on.
(2) Ensure that the SIM card is not suspended and under the signal coverage.
●To ensure kids safety, parents must bind and activate the Smart watch
through the app, to fully use the phone functions. The user who activates the
Smart watch will become the admin of the wrist phone. Other users can bind
with the Smart watch in the following ways:
Charging jack Auto aaching
EN
(1) Scan the QR code in the app and get approval from the admin.
(2) The admin invites family members and grant permissions through the
address book in the app.
●The admin can set other family members as the admin. When all admins
unbind from the Smart watch, it restores to factory seings.
Introduction and Declaration
The 360 Kids Smart watch includes the Smart watch unit and the mobile client
software, which cooperate to fully provide phone functions. Please read the
operation instructions and the safety information in this manual before using
the Smart watch to ensure safe and correct use.
Please use the original accessories to avoid unpredictable damage to the
device. The warranty isnot valid if the product is not used properly or connected
to incompatible accessories. Incorrect use of this product may cause personal
injury orendanger others. In this regard, 360 doesnot assume any responsibility.

EN
Safety Issue
TBefore using this product, please read this chapter carefully, follow the
instructions, and pay aention to these warnings. 360 and the manufacturer
are not responsible for the consequences of improper use or failure to follow
the instructions in this manual.
Medical products and public medical facilities: Any radio transmiing device
(including this product) may interfere with the functionsof improperly protected
medical devices. If there is a problem or it is uncertain whether a medical
device can shield external RF energy, please consult a doctor or medical
equipment manufacturer. Please obey the relevant regulations where the
wireless transmission function of electronic devices is prohibited.
Cardiac pacemaker: When this product is enabled, always keep it away from
the cardiac pacemaker with a distance of long than 15.3 cm (about 6 inches).
Do not place this product in your jacket pocket. Use this product on the other
side of the cardiac pacemaker to reduce potential interference. If you suspect
that interference has occurred, please turn o the product immediately.
The warranty is not valid if you remove or modify the casing of the product
without permission.
The function implementation and accuracy of this product depends on the
GPS network, GIS (geographic information) system, and electronic computer
system. It requires a smooth network for normal operating.
360 does not assume any responsibility for any loss caused by service
interruption due to network failure or other force majeure.
360 reserves the rights to modify and improve any product in this manual for
continuous improvement without prior notice.
The content of this manual is provided at the time of manufacturing. Except
as required by applicable laws, no warranties of any kind, either express or
implied, including but not limited to, the implied warranties of merchantability
and tness for a particular purpose, are made in relation to the accuracy,
reliability or contents of this manual.
Please use a standard Nano card rather than cuing the card using a card
cuer. Otherwise, the user shall assume any responsibility formed any
consequences arising from the user.
Procedure:
(1) Properly insert the SIM card.
(2) Ensure that the baery is suicient. If the wrist phone cannot start up due
to insuicient baery connect the wrist phone and the charger using a
magnetic charging cable. Charge the wrist phone for more than 15 minutes.

EN
●Flammable and explosive areas
Do not use this product in th e following environments: gas stations, fuel depots
chemical plants, places where blasting is being carried out, potentiallyexplosive
areas (such as vessel boom ta nks, fuel or chemical transportation or storage
facilities), places where the air contains chemicals or particles su ch as particles
powders, and metal powder. Sparks can cause an explosion or re in these
environments, causing casualties.
●Electronic equipment
The use of RF equipment, including this product, may cause interference to
some electronic equipment with poor shielding performance, such as some
electronic sys tems in motorvehicles. Please consult the equipmentmanufacturer
before using this product if necessary.
● Children and pets
Keep all parts, such as the data cable, out of reach of children and pets.
It may cause suocation or other dangerous situations if children and pets
swallow any parts.
Operating environment
Do not use this product in a place where is dusty, damp, dirty, or close to a
magnetic eld, to avoid any internal circuit failure.
Do not use this product during thunderstorms. Thunderstorms can cause
malfunction or hazards of this product.
This product is normally used in a temperature range of –10℃to 45℃. If the
operating temperature is out of this range, it may cause product malfunction
re, or explosion.
Do not aempt to disassemble the product. Improper operation or handling
may cause the product and baery contents to aect human health or
pollute the environment.
Hearing aids and cochlear implant: Some digital wireless devices may cause
interference to certain hearing aids or cochlear implant. If such interference
occurs, consult an authorized medical professional and refer to the medical
equipment manufacturer's instructions.
Other medical equipment: If you and other people use other medicalequipment
consult an authorized medical professional or equipment manufacturer to
determine if the equipment can shield surrounding RF signals.
Precautions for using the product on the aircraft: Please turn o the product
when the aircraft takes o. To prevent interference with the aircraft
communication system, do not use this product during flight.
●To ensure kids safety, parents must bind and activate the wrist phone
through the app, to fully use the phone functions. The user who activates the
wrist phone will become the admin of the wrist phone. Other users can bind
with the wrist phone in the following ways:

●Maintenance and servicing
Do not severely shock or vibrate this product and its accessories to avoid
damage, which may result in malfunction of this product.
Please stop using this product before cleaning and maintenance.
Clean the screen with a clean, dry, and soft cloth.
Do not disassemble or modify this product or accessories without permissions.
To extend the lifetime of the baery, keep the baery always in the charged
state. When the product is not in use, please charge it before turning it o and
store it in a cool, dry place where is away from light. The storage time should
not exceed one month. Otherwise, charge the product again.
After the charging is completed or unnecessary, please disconnect the product
fromthe chargerand remove the charger plug from the powersocket. If the
charger plug or power cord is damaged, do not continue to use it to avoid
electric shock or re.
Please do not use the charger to charge the wrist phone in high temperature
and high humidity places such as kitchens and bathrooms. Otherwise, it may
cause electric shock, re, or other safety hazards.
●Safety precautions for the baery
Please do not disassemble or modify the built-in baery without permission
to avoid damaging the baery, generating heat, or causing re.
Do not throw the baery into a re, or place it in a hot place, as this may cause
the baery to catch re or explode.
If the baery has abnormal phenomenon such as heating, deformation
discoloration, swelling, or liquid leakage duringuse, charging or storage, please
stop using it and contact the after-sales service center to replace the baery
to avoid safety problems.
Do not allow children to charge their wrist phones or touch the charging sockets
to prevent the risk of electric shock.
Do not touch the power cord, product or charger with wet hands to avoid
short circuit, malfunction, or electric shock.
Waterproof performance
The water intrusion ability is tested according to the IEC60529-2013 standard
under controlled conditions, and the waterproof rating of the factory product is
IPX8.
The waterproof performance of the wrist phone is not a permanent feature.
To ensure normal functioning, please follow the instructions below:
EN

(1) It is recommended not to wear the wrist phone during bathing, sauna,
swimming and taking a hot spring bath.
(2) Do not replace the SIM card or charge the product when it is not dry.
(3) Do not place the wrist phone in an environment where water flows (such
as taps, water guns, etc.)
(4) Do not immerse the wrist phone in water for a long time.
(5) Wipe the sweat on the wrist phone in a timely manner.
(6) Avoid falling or shocking the wrist phone (it may damage the waterproof
performance).
(7) Avoid contact with any liquid (such as wine, sea water, salt water, detergent
etc.) other than clean water.
(8) The waterproof performance of the wrist phone is not a permanent feature
and may deteriorate as the waterproof ring ages or accidentally experiences
shocks.
(9) If the product is used in water, the touch screen and other functions may
not work properly.
●Description of Hazardous Substance Status
Toxic and Hazardous
Substances
and Elements
Lead (Pb)
Mercury (Hg)
Cadmium (Cd)
Hexavalent
chromium (Cr (VI))
Polybrominated
biphenyls (PBB)
Polybrominated
Diphenyl Ethers (PBDE)
Parts
Power
Cord
Plastic
Casing PCB Assembly Baery Touch
Screen
The environmental protection period of each component is as follows:
10 years for the PCB assembly, 10 years for the power cord, and 5 years
for the baery. The env ironmental protectionperiod marked by this product
refers to the safe period of use of the product without leakage of toxic and
hazardous substances under the conditions specied in this user manual.
EN

EN
After-sales Service
Warranty policies
(1) This product enjoys local maintenance service within one year from the
date of purchase. Please contact 360 authorized dealers for specic details.
Non-warranty policies
(1) No valid purchase and warranty certicate, or expired warranty period
(2) Damage due to improper use, maintenance and servicing in violation
of the user manual, or damage or malfunctions due to unauthorized
disassembling, repairing, or modifying of the system software.
(3) Collision, water intrusion, and bumping.
(4) Damage of the surface of the product such as outer casing, LCD, or
antenna during use, except for the crack of the outer casing due to structural
or material factors.
(5) Damage caused by force majeure, or due to changes in national policies
and updates and improvements in carrier's technology.
○: It indicates that the toxic and hazardous substance in all
homogeneous materials of this part is below the limit specied in
SJ/T11363-2006.
×: It indicates that the toxic and hazardous substance in at least one
homogeneous material of this part exceeds the limit specied in
SJ/T11363-2006.
Remarks: The lead content in a small number of special-purpose SMT
electronic components (such as high- voltage resistors, ceramic resistors
diodes, etc.) in the section labeled "×" i n the above table may be ≥ 0.1 %.
The lead content in screws or cor es of data cables can be ≥0.1% due to
the superior performance of the alloy.Thesecomponents are in compliance
with exemption clauses of the EU RoHS Directive. At this stage, due to the
limitations of the global technological development level, there are no
alternative technologies and components, and the lead content of the
external contactable parts of the product meets the environmental
protection requirements.

Contact Us
Customer service: [email protected]
Facebook@360smartlife
Youtube@360smartlife
Instagram@360smartlife
Website:smart.360.com