3Com SuperStack II 3300 FX User manual

http://www.3com.com/tns
Part No. DUA1510-0AAA04-PDF
Published April 2001
Getting the Best from
3Com®Network Supervisor
Software Version 3.0 for Windows®

3Com Corporation
5400 Bayfront Plaza
Santa Clara, California
95052-8145
Copyright © 2001, 3Com Technologies. All rights reserved. No part of thisdocumentation may be reproduced
in any form or by any means or used to make any derivative work (such as translation, transformation, or
adaptation) without written permission from 3Com Technologies.
3Com Technologies reserves the right to revise this documentation and to make changes in content from time
to time without obligation on the part of 3Com Technologies to provide notification of such revision or
change.
3Com Technologies provides this documentation without warranty, term, or condition of any kind, either
implied or expressed, including, but not limited to, the implied warranties, terms or conditions of
merchantability, satisfactory quality, and fitness for a particular purpose. 3Com may make improvements or
changes in the product(s) and/or the program(s) described in this documentation at any time.
If there is any software on removable media described in this documentation, it is furnished under a license
agreement included with the product as a separate document, in the hard copy documentation, or on the
removable media in a directory file named LICENSE.TXT or !LICENSE.TXT. If you are unable to locate a copy,
please contact 3Com and a copy will be provided to you.
UNITED STATES GOVERNMENT LEGEND
If you are a United States government agency, then this documentation and the software described herein are
provided to you subject to thefollowing:
All technical data and computer software are commercial in nature and developed solely at private expense.
Software is delivered as “Commercial Computer Software”as defined in DFARS 252.227-7014 (June 1995) or
as a “commercial item”as defined in FAR 2.101(a) and as such is provided with only such rights as are
provided in 3Com’sstandard commercial license for theSoftware.Technical data isprovidedwith limited rights
only as provided in DFAR 252.227-7015 (No v1995) orFAR 52.227-14 (June 1987), whichever is applicable.
You agree not to remove or deface any portion of any legend provided on any licensed program or
documentation contained in, or delivered to you in conjunction with, this User Guide.
Unless otherwise indicated, 3Com registered trademarks are registered in the United States and mayormay not
be registered in other countries.
3Com, the 3Com logo, LinkBuilder, OfficeConnect, and SuperStack are registered trademarks of
3Com Corporation. CoreBuilder is a trademark of 3Com Corporation.
Windows is a registered trademark ofMicrosoft Corporation.
All other company and product names may be trademarks of the respective companies with which they are
associated.
Guide written by Michael Lamont. Edited by Dave Hall.

CONTENTS
ABOUT THIS GUIDE
How to Use This Guide 5
Who Is This Guide For? 5
Conventions 5
Related Documentation 6
Year 2000 Compliance 6
Documentation Comments 6
1OVERVIEW OF NETWORK MANAGEMENT
Why Use Network Management? 7
The Benefits of Network Management 7
FullNetwork View froma Single PC 7
Reducing Downtime 8
Improving Performance 8
Freeing Up Personnel 8
Reducing Equipment Costs 8
Key Network Management Functions 8
Monitoring Network Capacity 8
Predicting ProblemLinks and Devices 9
2USING TRANSCEND NETWORK SUPERVISOR TO MANAGE YOUR
NETWORK
Overviewof NetworkSupervisorWizards 12
Major Benefits of Network Management with Network Supervisor 12
Color-Coded View of Your Network Connectivity 12
Real-Time DetailedStress Monitoring 12
Total Visibility of Network Activity 13
Immediate Notification of Problems 13
SettingupNetwork Supervisorfor the First Time 13
Discovering and Mapping Your Network 13

Monitoring Core Devices and Links 14
Reacting to Network Events 15
Viewingthe Stressonyour Network15
Viewing Detailed Stress Indicators 16
Managing and Manipulating Events 19
Intelligent Event Generation 19
Instant Notification of Significant Activity Using Alerts 20
Viewing NetworkTrends and Patterns 21
Tracking the Devices on Your Network 21
Planning Your Network Capacity 22
Listing All the Devices Attached to Each Port 22
Network Discovery Report 22
3LIVE UPDATE
About Live Update 23
Live Update 23
Using Live Update 23
Live Update Setup 23
3COM END USER SOFTWARE LICENSE AGREEMENT

ABOUT THIS GUIDE
How to Use This
Guide This guide is designed to be read before you start to use 3Com®Network
Supervisor. It should enable you to gain an overview of the application
and how you can benefit from it.
This guide outlines:
■The main concepts and benefits of network management and how
you can benefit from it.
■An overview of Network Supervisor and how it can help you.
This is not a procedural guide to using Network Supervisor. For detailed
information onhow to use and configure Network Supervisor, use one of
the Wizards provided with the application or consult the online help.
Who Is This Guide
For? This guide is designed for users who are PC-literate, with some
experience of networking hardware, particularly managed products.
However, you are not expected to have any experience of network
management.
Conventions This section shows an example of the information note icon that is used
throughout this guide to indicate important features or instructions.
This is a sample informationnote icon.

6ABOUT THIS GUIDE
Related
Documentation The following document provides useful background information on
networks and networking.
The 3Com Introduction to Networking (supplied with Network
Supervisor).
This document can be accessed from the Windows Start menu, then by
following this path: Programs>3Com Network Supervisor>Network
Supervisor Guide.
Year 2000
Compliance For information onYear 2000 compliance and 3Com products, visit the
3Com Year 2000 Web page:
http://www.3com.com/products/yr2000.html
Documentation
Comments Your suggestions are very important to us. They will help make our
documentation more useful to you. Please e-mail comments about this
document to 3Com at:
[e-mail]
Please include the following information when commenting:
■Document title
■Document part number (on the title page)
■Page number (if appropriate)
Example:
■Getting the Best from 3Com Network Supervisor
■Part Number DUA1510-0AAA04-PDF
■Page 20

1OVERVIEW OF NETWORK
MANAGEMENT
This chapter gives you an overview of the basic concepts of network
management. It outlines:
■Why Use Network Management?
■The Benefits of Network Management
■Key Network Management Functions
Why Use Network
Management? Many businesses today run their computers on a computer network.
Using a network management solution allows you to track the
performance of your network and quickly identify problems before they
affect your users. This in turn helps you to run your business more
efficiently.
The Benefits of
Network
Management
Network management provides the following benefits:
■Full Network View from a Single PC
■Reducing Downtime
■Improving Performance
■Freeing Up Personnel
■Reducing Equipment Costs
Full Network View
from a Single PC Some network management software (including 3Com®Network
Supervisor) allows youto view and display alldevices, links andactivity on
your network from the convenience of a single, centrally-situated PC. For
example, you can easily locate andmonitor the health of a specific PC or
other type of device without leaving your desk.

8CHAPTER 1: OVERVIEWOF NETWORKMANAGEMENT
Reducing Downtime Network downtime can affect your business and its productivity. When
this happens, it is important that you restore connections as quickly as
possible.
Reactive network management does reduce downtime by responding to
device and link failures. However, a network management solution
provides you with a proactive management capability. This reduces the
number and severity of failures and can help avoid downtime altogether.
Improving
Performance Network topology and monitoring information give you an accurate view
of your network’s structure and traffic rates. Using this information you
can make changes to the structure of your network to improve its
performance.
Freeing Up Personnel Using a network management solution which gives a full view of your
network and actively warns you of problems, reduces the day-to-day
demands on personnel to find and fix problems. This automation allows
people to focus on key management activities.
Reducing Equipment
Costs Network management enables you to make better use of current
equipment, delaying expensive and disruptive upgrades until they are
necessary. Understanding your network also enables you to choose
upgrades that give the best return for any investment.
Key Network
Management
Functions
The key network management functions described here are useful tools
which help to deliver the benefits of network management described in
“The Benefits of Network Management”.
■Monitoring Network Capacity
■Predicting Problem Links and Devices
Monitoring Network
Capacity This lets you track recurring bottlenecks and plan for a regulated expansion of thecapacity (bandwidth) available to your users.

KeyNetwork Management Functions 9
Predicting Problem
Links and Devices This lets you provide preventative solutions using less staff-hours and reduces the amount of time that your network is either inefficient or
unavailable.
For example, network management software can show:
■History of problem areas.
■Devices on your network suffering from stress.
Stress is the performance measure of a network object (a device or link)
against pre-defined thresholds.

10 CHAPTER 1: OVERVIEWOF NETWORKMANAGEMENT

2USING NETWORK SUPERVISOR TO
MANAGE YOUR NETWORK
3Com®Network Supervisor is a powerful and easy-to-use network
management tool in the 3Com®network management range.
This chapter contains an overview of how you and your network can
benefit from Network Supervisor. This applies whether your network has
been carefully structured from the beginning or has evolved in a less
planned way.
Network Supervisor operates on Ethernet networks with up to 1500
devices (or 3000 devices if you have IP phones on your network). It works
best on networks which are based on 3Com devices, (although other
vendors’devices are supported).
This chapter contains the following sections:
■Overview of Network Supervisor Wizards
■Major Benefits of Network Management with Network Supervisor
■Setting up Network Supervisor for the First Time
■Viewing the Stress on your Network
■Managing and Manipulating Events
■Instant Notification of Significant Activity Using Alerts
■Viewing Network Trends and Patterns
A comprehensive glossary of terms is available on the Help system.

12 CHAPTER 2: USING NETWORK SUPERVISOR TO MANAGE YOUR NETWORK
Overview of
Network
Supervisor Wizards
Wizards are provided to guide you through the setup and configuration
of Network Supervisor parameters.
The Wizards often suggest useful default settings which can help you
start monitoring your network even when you are not sure which values
to set.
Major Benefits of
Network
Management with
Network Supervisor
Network Supervisor brings youthe following major benefits to help you
manage your network. These are:
■Color-Coded View of Your Network Connectivity
■Real-Time Detailed Stress Monitoring
■Total Visibility of Network Activity
■Immediate Notificationof Problems
Color-Coded View of
Your Network
Connectivity
Using Network Supervisor’s graphicalmap and intelligentmonitoring you
can quickly identify problem areas and overloaded links on your network.
The map shows the devices and connections on your network, including
the links attaching the hubs, switches and routers to PCs. This provides an
instant, color-coded view of the state of your network.
Network Supervisor’smap also providesphysical connectivity information
for your network.
Real-Time Detailed
Stress Monitoring Good monitoring involves examining a combination of available
bandwidth, generated errors, service availability and service response
times.
Using Network Supervisor’smonitoring and alerts system, you are free to
run your business, while Network Supervisorwatches the important parts
of your network and informs you if anything goes wrong.
Stress monitoring provides you with a performance measures of a
network object (a device or link) against pre-defined thresholds.
Network devices such as switches are monitored for their own internal
performance and for their external communication performance with
other devices. End stations are monitored for response time and service
availability.

Setting up Network Supervisor for the First Time 13
Network Supervisor color-codes objects to indicate stress levels, providing
an accurate and easy-to-read indication of current levels of stress on any
monitored objects. A warning zone helps you predict when a device or
link may be about to become a problem.
Total Visibility of
Network Activity You cannot always be scanning the Network Supervisor map forpotential
problems. You need another way of achieving total visibility of your
network.
Network Supervisor provides this with an Event List which logs all issues
as they occur.
Network Supervisor’s Event List also lets you annotate events, adding
additional information or comments on how the problem was solved.
This allows you to build a knowledgebase of your network, making
recurring problems easier to identify and resolve.
Immediate
Notification of
Problems
You also need to be confident that you will know of network problems
before or at the same time as your users.
Network Supervisor provides an alert system which ensures that you are
notified of problems immediately. You can choose various visual and
audible methods to notify you of significant network activity, for example,
an e-mail, sound or popup dialog box.
Setting up Network
Supervisor for the
First Time
These are the initial steps which provide the context for your network
management:
■Discovering and Mapping Your Network
■Monitoring Core Devices and Links
■Reacting to Network Events
Discovering and
Mapping Your
Network
Network Supervisor incorporates an easy-to-use Network Discovery
Wizard that guides you through the process of discovering the devices on
your network and determining the links between them.
You can choose to discoverandmap the local subnet, the whole network
or specify a group of subnets (including ranges of devices within a
subnet).

14 CHAPTER 2: USING NETWORK SUPERVISOR TO MANAGE YOUR NETWORK
There are two steps which are used to construct a map of your network.
Network Supervisor:
1Finds the devices connected to your network (and builds a model of each
one)
A ping message is sent by Network Supervisor to each IP address in the
range you choose to specify. Each device that responds is then contacted
individually and Network Supervisor constructs a model of that device
from the information it provides.
2Figures out how each device is connected to the rest of your network
Network Supervisor works outtheconnectionsbytalkingtotheswitches,
routers and hubs on your network.
Monitoring Core
Devices and Links Network Supervisor attempts to identify the core devices and links and
monitor them for you. It judges which devices and links are most
important to keep your network’s central services operating; that is, the
backbone devices of your network. This is your core network.
For your initial settings, it is probably best to monitor only these devices
which are critical to your network’s operation and performance levels.
Network Supervisoralso shows the state of each core link. Forexample, it
shows whether each core link is up or down. Network Supervisor uses
color-coding to enable easy recognition of the stress level on each device
and link.
If there is not enough information for Network Supervisor to discover
what connectionsare presenton a part of the network, it displays acloud
where it knows that devices are connected but cannot say how.
Unsupported SNMP devices (for example, some non-3Com devices) are
shown in this way.
Monitoring Additional Devices and Links
You can also manually start monitoring any other devices or links which
are particularly important to your network.
For example, you may have a switch which connects a server farm. As this
switch and its links are important to many users, you may want to turn on
monitoring to it and other links like it.
A server farm is a collection of servers (for example, file servers and
printers) which are available to groups of users on a network.

Viewing the Stress on your Network 15
Reacting to Network
Events When you start monitoringfor the first time, youmay start to see many events in the Event List.
If the number of events in the list appears to be excessive, this may
indicate that the activity thresholds set are too low for your network. If
this is the case, Network Supervisor lets you tune the thresholds to a
more appropriate level.
You should decide which of these events areimportant and tell Network
Supervisor how to handle these when they occur again.
For example, you may choose to configure an alert for a particular event:
this means that every time the same problem occurs again, you will
immediately be informed of it. This is a reactive step which you will only
need to do once.
Alerts are a notification mechanism. They can be an e-mail, sound, popup
message or can launch an application. They are attached to an item on
your network map and are triggered when an event occurs.
Once you have configured your first set of alerts, you can then use the
following steps to quickly locate and identify any problems on your
network:
1React to an alert.
2Look in the Event List.
3Follow the link from the Event List to the problem area on the map.
4Perform diagnosis.
Viewing the Stress
on your Network When you launch a Network Stress window (shown in Figure 1), Network
Supervisor shows the magnitude of stress for a particular device. This
provides you with more useful informationthan merely being told the
device has a high or low level of stress.
Stress is the performance measure of a network object (a device or link)
against pre-defined thresholds.
The stress bars represent the stress of the devices and links on your
network by low (green), warning (yellow) and high (red) zones.

16 CHAPTER 2: USING NETWORK SUPERVISOR TO MANAGE YOUR NETWORK
The significant advantage of having a yellow (warning) zone is that it
gives you a clear indication that a monitor is approaching a serious
condition. This may allow you to predict some network problems before
they become critical.
For example, a half-lit green bar indicates that you should have
considerable scope before that device requires attention, while a fully-lit
red bar shows that something is seriouslywrong with the performance of
that device and that it probably needs urgent attention.
A monitor is a measure of the stress being experienced by a network
device or link.
Viewing Detailed
Stress Indicators Once Network Supervisor has identifiedwhich device or link is causing a
problem, you may want more detailed information on the individual
measures which are causing raised levels of stress.
Figure 1 Network Stress Window
Network Supervisor lets you do this by giving you access to:
■Plain Text Interpretation of a Network Problem
■Detailed Monitoring Information

Viewing the Stress on your Network 17
Plain Text Interpretation of a Network Problem
A textual interpretation of a network problem is a useful starting point or
may provide enough information for you to identify and solve a problem.
Network Supervisor provides this information with itsWhat’sWrong
Dialog Box, shown in Figure 2.
The language used in the What’s Wrong Dialog Box is non-technical,
making the definitions easy to understand.
Figure 2 What’s Wrong Dialog Box
Detailed Monitoring Information
As an alternative, a more detailed view of how a network device or link is
being monitored is available.
Network Supervisor gives youthis type of information by letting you see
the embedded devices, ports and monitors on each device. It does this
through an easy-to-use Windows Explorer-style interface.

18 CHAPTER 2: USING NETWORK SUPERVISOR TO MANAGE YOUR NETWORK
The All Monitors Dialog Box (shown in Figure 3), lets you:
■View which monitors are being used.
■Change the thresholds on each monitor.
■Switch monitors on or off.
A monitor is a specific stress measure for a network device or link.
Information on each monitor is gathered by an individual monitor.
Information from the individual monitors for each device is combined to
form one overall monitor. This composite monitor gives a profile of the
network device which Network Supervisor uses to calculate the stress for
that device or link.
Figure 3 All Monitors Dialog Box

Managing and Manipulating Events 19
Managing and
Manipulating
Events
The Network Supervisor Event List greatly improves your ability to
prioritize and react to problems on your network.
Intelligent Event
Generation Network Supervisor generates events intelligently. For example, to
prevent utilization ‘spikes’causing unnecessary events, the threshold set
must be exceeded for a reasonable period of time (determined by
Network Supervisor) before an event is generated.
This means that Network Supervisor will produce a more accurate
representation of what is effectively one incident, than if it generated an
event every time the threshold was passed.
The events in the Event List are generated internally by Network
Supervisor, they are not SNMP traps generated by network devices.
Network Supervisor provides the following to help you manage
generated events:
■Filtering
■Commenting
■Sorting
■Acknowledging
■Ageing
Filtering
Filteringtemporarily removes entries from the Event List to provide a clear
view of a selected type of event. You can filter on various criteria
including event severity, time and description.
Commenting
The Comment facility lets you write and attach notes about events
relating to specific devices or links. You may want to include information
about why an event occurred previously and a suggested solution.
You can then filter events based on the content of a comment, searching
for information to help solve a newly discovered problem.

20 CHAPTER 2: USING NETWORK SUPERVISOR TO MANAGE YOUR NETWORK
In the longer term, the Comment facilitylets you build a problem solving
database for your network which can help you to solve common
problems quickly.
Sorting
Sorting lets you order events by the column headings of the Event List.
For example, you can sort by event severity, time or importance.
Acknowledging
This lets you mark as acknowledged, events or groups of events which
you have seen.
Ageing
This lets you control how many events are retained in the Event List. You
can set a maximum number of events to be kept or specify that events of
a certain age (number of days) are deleted.
Instant Notification
of Significant
Activity Using
Alerts
Although the Event List gives you a comprehensive view of network
activity, it is also useful to find out instantly if there is any significant
activity on your network.
Network Supervisor provides alerts for this purpose. They instantly notify
you of significant network activity without requiring that you
continuously have Network Supervisor as the active application on your
PC.
If you want tobe notifiedof an event as soon as it happens, configure an
alert to be activated when that event has been generated.
Network Supervisor provides five types of alerts to suit different working
environments. An alert can be defined as a popup dialog box, e-mail
message, audio alert, pager message or it can launch a specified
application.