3M Scotch-Weld Applicator AE II LT User manual

Scotch-Weld™Applicator AE II LT
for Scotch-Weld™Hot Melt LM Adhesives
High volume,
high productivity
industrial tool
at a great value
On Light Indicator
Contoured grip and wide trigger
engineered for operator comfort
and precise control.
8' UL listed cord
extends operator
reach.
Positive check valve nozzle
helps minimize dripping.
Versatile with choice of three Scotch-Weld™ Hot Melt
LM Adhesive formulations.
Built-in stand helps keep
applicator upright, stable,
and ready to grip.
Anti-tip
guard swings
up and
out of the
way during
application.
Delivers up to 4 lbs./hr.
of Scotch-Weld™Hot Melt LM
Adhesive for high volume
production.
Compact and light
weighs only 20 ounces.
Rugged, high impact
resin construction
withstands daily
industrial use.
Plugs into any
110V outlet for
convenient
portability.
Packaging Product
Assembly
1
3
4
2
For great value the 3M™Scotch-Weld™
Hot Melt Applicator AE II LT combines the
best
features of a high volume industrial
system into a compact, self-contained
applicator. To keep up with demanding
packaging and assembly lines, warm-up is
only 3 minutes and adhesive flows up to 4
lbs. per hour. Industrial-grade 250-Watt PTC
(Positive Temperature Coefficient) system
ensures a consistent 270°F (132°C)
for application.
For strong, attractive package closures, use this efficient tool with 3M™Scotch-Weld™
Hot
Melt Adhesive 3762LM for short-run manual case sealing, rework areas, and multistation
operations. In furniture and fixture assembly, 3M™Scotch-Weld™
Hot Melt Adhesive 3776LM
quickly bonds soft and hard woods, and particle board. For bonding temperature sensitive
plastics such as EPS foam, 3M™ Scotch-Weld™ Hot Melt Adhesive 3792LM bonds securely
without warping or pitting the surface.

Industrial Adhesives and Tapes Division
Customer Response Center
900 Bush Avenue, Building 21-1W-10
St. Paul, MN 55144-1000
www.3M.com/adhesives
3M™ Scotch-Weld™ Hot Melt LM Adhesives
Products
3750LM
3762LM
3776LM
3792LM
Markets
Manual and contract packaging
Manual and contract packaging, P.O.P., and woodworking
Furniture, woodworking, and product assembly
Plastics, P.O.P., and product assembly
For details call 1-800-362-3550, or contact your local 3M authorized distributor.
3M and Scotch-Weld
are trademarks of 3M Company.
Printed in U.S.A.
© 3M 2008
78-9236-7172-7
Limited Product Warranty: 3M warrants for 6 months from the date of manufacture, that the 3M product will be free of defects in material and manufacture. 3M MAKES NO
OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This
warranty does not cover damage resulting from the use or inability to use the 3M product due to misuse, workmanship in application, or application or storage not in
accordance with 3M recommended procedures. Important Notice: User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for
user’s method of application. Please remember that many factors can affect the use and performance of a 3M product in a particular application. The materials to
be bonded with the product, the surface preparation of these materials, the product selected for use, the conditions in which the product is used, and the time and environmental
conditions in which the product is expected to perform are among the many factors that can affect the use and performance of a 3M product. Given the variety of factors that can
affect the use and performance of a 3M product, some of which are uniquely within the user’s knowledge and control, it is essential that the user evaluate the 3M product to
determine whether it is fit for a particular purpose and suitable for the user’s method of application. Limitation of Remedies and Liability: If the 3M product is proved
to be defective within the warranty period stated above, THE EXCLUSIVE REMEDY, AT 3M’S OPTION, SHALL BE TO REFUND THE PURCHASE PRICE OF OR TO REPAIR OR REPLACE
THE DEFECTIVE 3M PRODUCT. 3M shall not otherwise be liable for loss or damages, whether direct, indirect, special, incidental, or consequential, regardless of the legal theory
asserted, including negligence, warranty, or strict liability.
* Also available in bulk.
(1) Made from components listed as indirect food additives under FDA regulations for adhesives
(21 CFR 175.105).
(2) Brookfield Thermosel Viscometer in Centipoise.
(3) ASTM E-28-6-7
(4) Temperature at which adhesive fails
(5) On canvas
(6) On Douglas Fir
(7) 1/8" semicircular bead, Douglas Fir to Douglas Fir.
N/A = Not available
Features/Application Ideas
Excellent “hot tack”, fast setting for corrugated, beadboard, repack, recoup.
Economical, general purpose. Use with AE II LT applicator only.
Excellent “hot tack”, fast setting for corrugated, beadboard, recouperage,
repacking chipboard, wood. Economical, general purpose. Use with low melt
applicator only.
Bonds variety of plastics, woods and light-gauge metals. Use with low melt
applicator only.
Clear, multi-purpose for wood, coated paper, polyolefins and other heat-sensitive
materials . P.O.P. displays. Use with low melt applicator only.
Delivery Peel Shear Open
EC Temp Time (sec) Ball & Ring Heat Strength Strength Time
Product FDA UL 94 Control Viscosity for 1'' x 3'' Melt Point3Resistance4PIW5PSI61/8'' Bead
(Color) Listed1Listing Sizes Modules cps2Cartridge (°F/°C) (°F/°C) 72°F (22°C) 72°F (22°C) (sec)7
3750LM N N/A 1/2" x 12"AE N/A 4000 45 200/95 128/54 6 475 25
Tan @250°F
3762LM* Y N/A 5⁄8" x 8"Q 5⁄8" x 2"TC 1 4000 45 205/96 130/54 6 480 25
Lt. Amber 1" x 3"PG 1/2" x 12" @250°F
3776LM N/A N/A 5⁄8" x 8"Q 1/2" x 12" 1 8250 47 184/84 140/60 9 600 40
Tan 1" x 3"PG @250°F
3792LM* Y V2 5⁄8" x 8"Q 5⁄8" x 2"TC 1 10,500 57 178/81 140/60 13 350 40
Low Melt Technology:
Applied 250°–270°F (127°–132°C)
Note: The technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes.