3M MP220 User manual

quick
start
Multi_3M-MP220-QSG-4-75x7.indb 1 11/29/2011 5:38:44 PM

Multi_3M-MP220-QSG-4-75x7.indb 2 11/29/2011 5:38:44 PM

3
3M™Mobile Projector MP220
© 2011 3M. All Rights Reserved.
quick start........................................................................... 4
démarrage rapide .............................................................. 14
kurzanleitung..................................................................... 24
inicio rápido....................................................................... 34
guida rapida ...................................................................... 44
snelstartgids...................................................................... 54
快速入门指南 ........................................................... 64
快速入門指引 ........................................................... 74
クイックスタートガ イド ......................................... 84
빠른 시작 가이드.................................................. 94
English 日本語Nederlands 繁體中文Español 简体中文ItalianoDeutschFrançais 한국어
Multi_3M-MP220-QSG-4-75x7.indb 3 11/29/2011 5:38:45 PM

4
3M™Mobile Projector MP220
© 2011 3M. All Rights Reserved.
English
Thank You
Thank you for purchasing the mobile
projector from 3M. Now you can
enjoy your favorite movies, TV shows,
videos, and photo slideshows in larger
than life viewing – on walls, floors, and
even ceilings! This little projector can
project images from other devices, with
additional cables (sold separately).
Important Notice
Before using this product, please read
all warning and caution statements in
the Product Safety Guide.
Warranty
The 3M™ Mobile Projector MP220 (the
“3M product”) is warranted to be free
from defects in material or manufacture
for a period of 1 year from the date of
purchase. If the product needs service
please call 1-866-631-1656. For the
detailed terms and conditions of the
Warranty, refer to the Product Safety
and Warranty Guide or contact us at
1-866-631-1656 or meetings@mmm.
com or go to www.3mpocketprojector.
com/support.
Customer Support
For manuals, frequently asked
questions, and technical support, call
1-866-631-1656 (Toll Free in the US)
or go to www.3mpocketprojector.com/
support.
Updating Software
For information on updating your
MP220, please go to
http://www.3mpocketprojector.com/
support.
Multi_3M-MP220-QSG-4-75x7.indb 4 11/29/2011 5:38:45 PM

5
3M™Mobile Projector MP220
© 2011 3M. All Rights Reserved.
English
Remove Battery
Protective Film
The mobile projector comes with a
partially charged battery. Before use,
remove the protective film and fully
charge the battery.
Pull
to
remove
Assemble the
PowerAdapter
Charge the Battery
110–240 VAC
50/60 Hz
3 hours
Multi_3M-MP220-QSG-4-75x7.indb 5 11/29/2011 5:38:48 PM

6
3M™Mobile Projector MP220
© 2011 3M. All Rights Reserved.
English
Parts
1 Navigation panel
2 Power On/Off – Powers the projector on and off, or turns off the lamp.
3 microSD card slot – Accepts a 32GB or less microSD card.
4 Volume down – Turns down speaker or audio out output.
5 Volume up – Turns up speaker or audio out output.
8
7
1
2
3
4
5
7
6
9
18
11
19
7
14
15
14
16
17
12
13
10
10
Multi_3M-MP220-QSG-4-75x7.indb 6 11/29/2011 5:38:49 PM

7
3M™Mobile Projector MP220
© 2011 3M. All Rights Reserved.
English
6 IR sensor – Accepts commands
from 3M remote control. Remote
control sold separately.
7 Air vents – Do not block fans or
vents while projector is operating
or cooling down. This will
cause projector to overheat and
automatically turn off.
8 Status indicator LED
9 Focus wheel – Adjusts to sharpen
image.
10 Cooling fans – Do not block
fans or vents while projector is
operating or cooling down. This
will cause projector to overheat
and automatically turn off.
11 Lens
12 Battery compartment
13 Battery cover securing screw
14 Speakers
15 DC power in – Powers the
projector or charges the battery
using the 3M power supply.
16 USB – Transfer files back and
forth from your computer to the
projector. Attach a USB computer
mouse, or keyboard. Access files
on USB memory stick.
17 VGA-AV – Connect the 3M VGA
or Video cable to your computer,
DVD Player, or other video device
and project its image. Cables sold
separately.
18 Tripod Mount
19 Earphone jack – Attach
earphones or computer speakers.
Navigation Panel
4
2
1
5
3
1 Touch sensor – Moves pointer
around screen or chooses
between available menu items.
2 Home key – Press to open the
Home screen. Press and hold to
open recently used applications.
3 Menu key – Press to open the
menu for the current screen or
application.
4 Mode key – Press and hold to
open the mouse mode menu.
5 Back key – Press to open
previous screen or closes
onscreen keyboard.
Multi_3M-MP220-QSG-4-75x7.indb 7 11/29/2011 5:38:50 PM

8
3M™Mobile Projector MP220
© 2011 3M. All Rights Reserved.
English
Turn the Projector On
Press the power button momentarily.
Note that the projector might take some
time to fully power on.
Turn the Projector Off
1 Press and hold the power button
until the Device options menu
appears on the screen.
2 Select Power off from the menu.
3 Confirm that you wish to turn the
projector off by selecting OK.
Turn the Lamp Off
To turn the projector lamp off, press
and quickly release the power button.
To turn the lamp back on, press any
button.
Note: When only the lamp is off, the
projector continues to use a small
amount of power. Do not place
projector into a bag in this state as it
can easily be turned back on.
Using the Touch Sensor
The touch sensor detects the movement
of your finger and moves the cursor
on the screen accordingly. Depending
on how you like to navigate, the touch
sensor can be used in one of two
modes, as follows:
• Trackball mode - Jumps from one
menu item to the next in a similar
way to most mobile phone menus.
• Mouse mode - Moves the cursor
around the screen just like on a
computer.
No matter which mode is being used,
clicking the touch sensor will select the
highlighted option (or the option under
the cursor), just like left-clicking on a
standard computer mouse.
Switching Between Touch Sensor
Modes
To switch between touch sensor modes,
press and hold the Search key until the
Touch sensor mode switch message
appears. Click OK to confirm that you
want to switch modes.
Note that on some screens one mode
may be better than the other in order
to easily select all available options.
Initial Setup
The first time you switch on your
MP220, you will need to set up your
language and the time & date.
Multi_3M-MP220-QSG-4-75x7.indb 8 11/29/2011 5:38:51 PM

9
3M™Mobile Projector MP220
© 2011 3M. All Rights Reserved.
English
Setting your Language
1 Click Locale.
2 Choose your language. If your
language does not appear on the
screen, you may have to scroll
down.
Setting the Date & Time
To set the date and time, click Date &
Time.
Setting the time
1 Click on Set time.
2 Click on the + or - to change the
hours and minutes.
3 To change from AM to PM, click
on AM.
4 Once finished, click Set.
Note: Clicking and holding + or - will
cycle through the hours or minutes.
Setting the date
1 Click on Set date.
2 Click on the + or - to change the
month, day and year.
3 Once finished, click Set.
Note: Clicking and holding + or - will
cycle through the days, months or
years.
To return to the Home screen, press the
Home key on the navigation panel.
Install Optional
microSD Card
To insert or remove the microSD card,
press it in until it clicks.
Note: Before you remove the microSD
from the projector, you should
unmount it first, as follows:
1 From the Home screen click on
the applications icon at the
bottom of the screen.
2 Click on the Settings icon.
3 Select SD card & local storage.
4 Select Unmount SD card.
Multi_3M-MP220-QSG-4-75x7.indb 9 11/29/2011 5:38:52 PM

10
3M™Mobile Projector MP220
© 2011 3M. All Rights Reserved.
English
Transfer files to the
projector
Note: The USB cable is for the transfer
of data only and cannot be used to
project an image directly from your
computer.
USB cable
Type of devices that may transfer data
to projector:
• Computers
• Netbooks
• Tablets
Connector on device and projector
• Computer: USB Type A connector
• Projector: Micro USB Type AB
connector
Access Files on the projector
from your computer
1 Turn on the projector and make
sure the Home screen is displayed
on the touch screen.
2 Connect the USB cable to the
projector.
3 Connect the USB cable to the
computer.
4 Notification appears that USB is
connected.
5 Click Turn on USB storage.
6 The projector and the microSD will
be detected as a removable drive
by the computer. The drive labeled
"Internal" is the projector's on-
board memory, and "Removable
Disk" is the microSD card in the
projector SD card slot.
7 Now you are ready to access
files on the projector from your
computer in the computer’s file
browser.
Before disconnecting the projector
from the computer’s USB port
You must properly eject the removable
drives on your computer or you may
lose data.
Eject both removable drives on your
computer operating system, as follows:
Eject a drive on computers running
Microsoft Windows: Open Windows
Explorer, right-click the drive, and click
Eject from the context menu.
Eject a drive on a computer running
Apple Mac OS 10: Open finder, choose
the drive, and then choose File>Eject
Multi_3M-MP220-QSG-4-75x7.indb 10 11/29/2011 5:38:53 PM