3M MP225a Configuration guide

projector
product
warranty
and
safety
guide

3M-MP225a-PSG.indb 2 6/15/2011 4:47:19 PM

3M™Pocket Projector MP225a
© 2011 3M. All Rights Reserved. 3
Product Warranty and Safety Guide....................................... 4
Garantie du produit et guide de sécurité.............................. 18
Garantía de producto e Instrucciones de seguridad .............. 32
3M-MP225a-PSG.indb 3 6/15/2011 4:47:20 PM

3M™Pocket Projector MP225a
4© 2011 3M. All Rights Reserved.
English
Important Notice
All statements, technical information, and recommendations related to 3M’s
products are based on information believed to be reliable, but the accuracy or
completeness is not guaranteed. Before using this product, you must evaluate it
and determine if it is suitable for your intended application. You assume all risks and
liability associated with such use. Any statements related to the product which are
not contained in 3M’s current publications, or any contrary statements contained
on your purchase order shall have no force or effect unless expressly set forth in a
written agreement signed by an authorized officer of 3M.
Technical Support Contact
For technical support, call 1-866-631-1656 or email [e-mail]
3M-MP225a-PSG.indb 4 6/15/2011 4:47:20 PM

3M™Pocket Projector MP225a
© 2011 3M. All Rights Reserved. 5
English
Contents
Important Notice ..................................................................................... 4
Technical Support Contact .......................................................................4
Intended Use Statement ..........................................................................6
Safety Information...................................................................................6
Safety Labels..........................................................................................9
Install Battery........................................................................................10
Remove Battery ....................................................................................10
Limited Warranty................................................................................... 12
3M-MP225a-PSG.indb 5 6/15/2011 4:47:20 PM

3M™Pocket Projector MP225a
6© 2011 3M. All Rights Reserved.
English
Intended Use Statement
The 3M Pocket Projector MP225a is designed to operate with the 3M specified
battery and 3M power adapter in normal office or home environments.
• 0˚–35˚C (32˚–95˚F)
• 10–80% RH (without condensation)
• 0–1829 m (0–6000 feet) above sea level
The ambient operating environment should be free of airborne smoke, grease,
oil and other contaminants that can affect the operation or performance of the
projector.
Use of this product in adverse conditions will void the product warranty.
Safety Information
Please read, understand, and follow all safety information contained in these
instructions prior to the use of this projector. Retain these instructions for future
reference.
Explanation of Signal Word Consequences
m Warning: Indicates a potentially hazardous situation, which, if not avoided, could
result in death or serious injury and/or property damage.
m Caution: Indicates a potentially hazardous situation, which, if not avoided, may
result in minor or moderate injury and/or property damage.
 Warning: Hazardous voltage
3M-MP225a-PSG.indb 6 6/15/2011 4:47:20 PM

3M™Pocket Projector MP225a
© 2011 3M. All Rights Reserved. 7
English
mWarning
To reduce the risk associated with hazardous voltage:
• Do not modify this product in any way. Use only 3M approved replacement
components.
• Do not attempt to service this projector other than battery replacement.
There are no user-serviceable parts other than the battery. Service to be
performed only by a 3M authorized service provider using 3M approved
system components.
• Do not use the wall power supply in a wet environment.
• Do not use with a damaged wall power supply. Replace damaged part prior
to use.
To reduce the risk associated with fire and explosion:
• Do not immerse the projector or battery in any liquid or allow either to get
wet.
• Use only 3M approved power supply and lithium ion battery provided.
• Do not disassemble or short circuit the battery.
• Do not dispose of the battery by incineration or fire.
• Do not operate this projector in any environment above 35°C (95°F).
• Do not expose the projector or battery to direct sunlight in a closed space
such as avehicle.
• Do not carry the battery in pockets, purses or handbags where it may contact
metalobjects.
• Do not place battery in contact with metal objects.
• Do not expose or store battery in direct sunlight or excessive heat (>60°C
[140°F]), or in moist or caustic environments.
To reduce the risks associated with driver distraction:
• Do not use this projector in a moving motor vehicle.
To reduce the risks associated with choking:
• Keep AV adapters and other small parts away from young children.
3M-MP225a-PSG.indb 7 6/15/2011 4:47:21 PM

3M™Pocket Projector MP225a
8© 2011 3M. All Rights Reserved.
English
mWarning
To reduce the risk associated with fire and explosion, battery leakage
or overheating:
• Do not immerse the battery in water or allow it to get wet.
• Do not reverse the positive(+) and negative(-) terminals.
• Do not connect the battery directly to a wall outlet. Use only the 3M specified
wall charger or automobile charger.
• Do not strike, throw or subject the battery to physical shock.
• Do not pierce the battery or break it open.
• Keep batteries out of the reach of children.
• Do not recharge the battery near a heat source or in extremely hot
conditions.
• Do not use the battery if it gives off an odor, generates heat, or becomes
discolored ordeformed.
• Keep away from exposed flames if the battery leaks or emits an odor.
• Flush the eyes with water and seek medical attention if the battery leaks and
battery fluid gets in the eyes.
mCaution
To reduce the risks associated with hearing loss:
• Be sure to read earphone manufacturer's instructions with respect to volume
level.
• User is responsible to set a safe volume level.
To reduce the risk associated with environmental contamination:
• Dispose of all system components in accordance with applicable government
regulations.
To reduce the risks associated with LED bright light:
• Do not stare directly into the projector lens.
To reduce the risks associated with tripping and falling:
• Position the charging cord and data cables so that they are not a tripping
hazard.
SAVE THESE INSTRUCTIONS
3M-MP225a-PSG.indb 8 6/15/2011 4:47:21 PM

3M™Pocket Projector MP225a
© 2011 3M. All Rights Reserved. 9
English
Safety Labels
LITHIUM ION BATTERY
Model No. LIN370-002
23Wh (10.95V 2100mAh)
P/N 78-6972-0058-8
mWarning
• Use a specified charger.
• Do not throw the battery into fire or heat.
• Do not short-circuit the battery terminals.
• Do not disassemble the battery.
Charging Specification
Standard Charge 12.3V/1.1A
Cut Off Voltage 9V
Max Charge 12.3V/2.1A
LED Light Output
CLASS 1 LED
PRODUCT
IEC60825-1 :1993+A1
:1997+A2:2001
Maximum Radiant Power:
1.693 mW
3M-MP225a-PSG.indb 9 6/15/2011 4:47:22 PM

3M™Pocket Projector MP225a
10 © 2011 3M. All Rights Reserved.
English
Install Battery
The 3M Pocket Projector MP225a comes with a rechargeable battery. The battery
should be fully charged before using the projector with the battery.
To install the battery: point the contacts on the battery toward the contacts on the
projector, insert the end farthest from the battery latch first, then push down until
the battery clicks into place.
Remove Battery
To remove the battery: slide the battery latch away from the battery and then lift the
battery out, starting at the end closest to the latch.
Important Note: Use only the 3M specified battery: 78-6972-0058-8
3M-MP225a-PSG.indb 10 6/15/2011 4:47:29 PM

3M™Pocket Projector MP225a
© 2011 3M. All Rights Reserved. 11
English
Battery Maintenance Tips:
• Remove the battery when the projector will not be used for one week or
longer.
• Charge and discharge the battery by turning on the projector at least once a
month.
• When storing the battery for more than a month, store it at 50% charge. The
battery is at 50% charge when the battery icon has three bars.
• Do not store a fully discharged battery because it may lose the ability to be
recharged.
• Do not store a fully charged battery because it may lose the ability to be
recharged to fullpower.
3M-MP225a-PSG.indb 11 6/15/2011 4:47:30 PM

3M™Pocket Projector MP225a
12 © 2011 3M. All Rights Reserved.
English
Limited Warranty
This warranty applies to the continental US only. The warranty terms, conditions,
remedy and limitation may vary in other countries. Contact your local 3M Company
for warranty information.
• The 3M™Pocket Projector MP225a (the “3M product”) is warranted to be
free from defects in material or manufacture for a period of 1 year from the
date ofpurchase.
• All other accessories included with the 3M product are warranted to be free
from defects in material or manufacture for a period of 1 year from the date of
purchase.
• Optional product accessories that are not sold as part of the 3M product are
subject to individual warranties.
THE WARRANTIES STATED ABOVE ARE EXCLUSIVE AND ARE MADE IN PLACE
OF ANY AND ALL WARRANTIES, EXPRESS OR IMPLIED WARRANTIES OR
CONDITIONS, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE, OR ANY INDUSTRY PRACTICE OR
CUSTOM OR TRADE USAGE.
In the event the 3M product fails to conform to the above stated warranties within
the applicable warranty period, your exclusive remedy shall be, at 3M’s option, to
replace or repair the 3M product or to refund the purchase price of the 3M product.
All replaced parts or products become property of 3M. If the product is repaired,
3M will repair the defective part(s) with a new or used part(s). If the 3M product is
replaced, 3M will replace the 3M product with the same or equivalent model and
with a new or refurbished 3M product. In the case of an approved warranty claim,
the replacement 3M product will carry only the remaining term of the original 3M
product’s warranty period as stated above. For warranty service, you must provide
proof of the date of the original purchase else the manufacturing code date will be
used to establish the start date of the warranty. The following are exclusions to the
above listedwarranty:
3M-MP225a-PSG.indb 12 6/15/2011 4:47:31 PM

3M™Pocket Projector MP225a
© 2011 3M. All Rights Reserved. 13
English
a. This warranty does not cover 3M product that is modified or damaged through
improper storage, misuse, abuse, accident, vandalism, improper installation,
neglect, improper shipping, damage caused by acts of war, disasters such
as fire, flood, and lightning, improper electrical current, software problems,
interaction with non-3M products, or service other than by an 3M Authorized
Service Provider, neglect or mishandling by any person. Normal wear and tear
is not covered under warranty.
b. 3M product is designed to operate in the typical indoor environment.
This warranty does not cover 3M product used outside of the following
circumstances:
• 100V–240V AC, 50/60 Hz
• 0˚–35˚C (32˚–95˚F)
• 10–80% RH (without condensation)
• 0–1829 m (0–6000 feet) above sea level
c. The air intake and exhaust vent must be clear of obstructions. Inadequate air
ventilation will cause the 3M product to malfunction or will cause damage to
the 3M product which will void the warranty.
d. This warranty does not cover any additional costs including, but not limited
to, those associated with removal, cleaning or installation of the 3M product,
adjustments, (mechanical or electronic) made to the 3M product.
e. This warranty covers only normal use of the product. 24-hour-per-day or other
excessive continual use causes strain and is not considered normal use.
f. This warranty does not cover consumables (e.g., batteries).
g. This warranty is not transferable.
h. 3M is not responsible for warranty service should the 3M label or logo or the
rating label or serial number be removed unless otherwise stated in writing for
the purposes of private labeling for partnership requirements.
3M-MP225a-PSG.indb 13 6/15/2011 4:47:31 PM

3M™Pocket Projector MP225a
14 © 2011 3M. All Rights Reserved.
English
i. This warranty does not cover postage, insurance, or shipping costs
incurred in presenting your 3M product for warranty service. Said costs
are the customer’s responsibility. If a claimed defect cannot be identified
or reproduced in service, the customer may be held responsible for cost
incurred. Should your warranty upgrade include a “change out” service and
the claimed defect cannot be identified or reproduced by the technician, the
customer will be responsible for call out costs.
FAILURE TO FOLLOW THE INSTRUCTIONS CONTAINED IN THE APPROPRIATE
3M PRODUCT MANUAL OR TO USE THE 3M PRODUCT IN ACCORDANCE
WITH 3M’S INTENDED USE STATEMENT, WILL VOID ALL WARRANTIES AND
LIMITED REMEDIES.
EXCEPT AS SPECIFICALLY STATED IN THE APPLICABLE 3M PRODUCT MANUAL,
3M SHALL NOT BE LIABLE FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, LOSS OF
PROFITS, REVENUE OR BUSINESS) RESULTING FROM, OR IN ANY WAY RELATED
TO PERFORMANCE, USE OR INABILITY TO USE ANY OF THE 3M PRODUCT. This
limitation applies regardless of the legal theory upon which damages aresought.
For warranty support, please call or write your local 3M office or a 3M Authorized
Service Provider to obtain an RMA # (Return Material Authorization number) before
returning the product. If you are inside the Continental United States of America,
please contact 3MCustomer Service at 1-866-631-1656 or email meetings@
mmm.com.
3M-MP225a-PSG.indb 14 6/15/2011 4:47:31 PM

3M™Pocket Projector MP225a
© 2011 3M. All Rights Reserved. 15
English
What 3M Will Do To Correct Problems:
• If your 3M product requires service, 3M will ask you to bring or send the
3M product, securely packaged in its original container or equivalent, along
with proof of the date of original purchase, to your 3M Service Dealer or 3M
Service Center.
• 3M will, at its option, repair or replace the defective unit without charge for
parts or labor. Return of the 3M product will be at 3M’s expense.
• When warranty service involves the exchange of the 3M product or of a part,
the item replaced becomes 3M property.
• The exchanged 3M product or part may be new or previously refurbished
to the 3Mstandard of quality, and at 3M’s option, the replacement may be
another model of likekind and quality.
• 3M’s liability for replacement of the warranted 3M product or part will
not exceed the original retail selling price of the 3M product. Exchange or
replacement products or parts assume the remaining warranty period of the
product covered by this limited warranty.
3M-MP225a-PSG.indb 15 6/15/2011 4:47:31 PM

3M™Pocket Projector MP225a
16 © 2011 3M. All Rights Reserved.
English
FCC STATEMENT - CLASS B
This equipment generates, uses and can radiate radio frequency energy, and
if not installed and used in accordance with the instruction manual may cause
interference to radio communications. It has been tested and found to comply
with the limits for a Class “B” computing device pursuant to Subpart B of Part 15
of the FCC Rules, which are designed to provide reasonable protection against
such interference when operated in a residential installation. However, there is
no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
NOTICE: This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
INSTRUCTIONS TO USERS: This equipment complies with the requirements of
FCC equipment provided that the following conditions are met. If the cables include
a EMI ferrite core, attach the ferrite core end of the cable to the projector. Use the
cables which are included with the projector orspecified.
Note: Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
CE Statement
ElectroMagnectic Compatibility Statement: Meets 2004/108/EC Directive
Low Voltage Directive: Meets 2006-95-EC Directive.
3M-MP225a-PSG.indb 16 6/15/2011 4:47:31 PM

3M™Pocket Projector MP225a
© 2011 3M. All Rights Reserved. 17
English
WEEE Statement
The following information is only for EU-members States:
The mark shown to the right is in compliance with Waste
Electrical and Electronic Equipment Directive 2002/96/
EC (WEEE). The mark indicates the requirement NOT to
dispose the equipment as unsorted municipal waste, but
use the return and collection systems according to local
law.
RoHS Statement
3M Mobile Interactive Solutions can provide RoHS certification for products meeting
the RoHS directive.1
European (EU) Restriction of Hazardous Substances (RoHS) Directive, 2002/95/EC,
1 RoHS compliant means that the product or part does not contain any of the substances in
excess of the following maximum concentration values in any homogeneous material, unless
the substance is in an application that is exempt under RoHS, as amended:(a) 0.1% (by
weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated
diphenyl ethers; or (b) 0.01% (by weight) for cadmium. This information represents 3M’s
knowledge and belief, which may be based on information provided by third party suppliers
to 3M.
3M-MP225a-PSG.indb 17 6/15/2011 4:47:32 PM

3M is a trademark of 3M Company.
3
Mobile Interactive Solutions
3M Austin Center
6801 River Place Blvd.
Austin, TX 78726-9000
866-631-1656
www.3Mpocketprojector.com
[email protected]
Please Recycle. Printed in China.
© 3M 2011. All Rights Reserved.
78-6971-1587-7-A-2
78-6971-1587-7
3M-MP225a-PSG.indb 46 6/15/2011 4:47:52 PM