3nStar PTE0120 User manual

PTE0120
USER MANUAL
Point of Sale System J6412

Table Of Contents
Safety Precautions…………………………………………………………………………1
Initial Installation…………………………………………………………………………...2
Touch POS Appearance…………………………………………………………………..3
Product Description………………………………………………………………………4-9
1. 15” inch LED Screen………………………………………………………………………..4-5
2. Touch Screen Parameter …………………………………………………………………..5
3. Motherboard Parameter……………………………………………………………………..6-7
4. Mainboard & I/O Port…………………………………………………………………………8-9
Dual Screen Settings………………………………………………………………………10-11
Appendix: Names of toxic and harmful substances or elements and their contents....

PTE0120 User Manual
- 1 -
Safety Precautions
1. Select a flat and vibration-free table to place the terminal
2. The location of the terminal should be chosen to avoid direct sunlight, and exposure to
water and dust
3. Please keep terminal away from strong electromagnetic fields.
4. To prevent fire or electric shock, please avoid blocking or covering air vents from
terminal.
5. In areas of poor power quality or storage, this terminal should be equipped with a
separate power supply to power it.
6. The product uses a standard wall outlet with earthling poles and cannot be arbitrarily
changed. Confirm if the voltage nameplates of the drives match.
7. Make sure the ground prong of the power plug is in a power outlet or power strip
grounding jack, and make sure that the grounding jack is thoroughly grounded. If poorly
grounded or ungrounded, the result will be either an electric shock, a fire, or damage to
the equipment.
8. The terminal is best to not start with other high-power appliances that frequently share
the same socket outlet. The terminal should be located away from the cash register, in a
close accessible way to swap.
9. This equipment should be connected to a variety of cables in case of power failure to
ensure that the conduct takes the screws tighten well to be able to plug or unplug the
cables.
10. Clean the terminal, please do not use a wet rag to wipe the body or chemicals such as:
gasoline, thinners, etc.
11. When the terminal fails, immediately cut off power. Do not attempt to open or repair
terminal, as well as to not let it be promptly used by others.
WARNING: For the non-compliance with the above issues, as well as non-qualified service
personnel or the use of non-designated by the Company to provide and repair parts for
maintenance of all the consequences, the Company does not assume any responsibility.

PTE0120 User Manual
- 2 -
Initial Installation
1. Unpacking
Immediately after unboxing the terminal, please verify if all products are none damaged.
If product contains damaged hardware, please make sure to report the issue to the
shipping company. Once reported the shipping company will immediately report the
claim to the manufacturer. After unpacking, check if spare parts are complete.
2. Preparing for Installation
Examine the case for cleanliness, signs, marking, and if labeling is correct. Check the
working environment because the cash register is a precision instrument and should be
checked before using the surrounding environment so that it meets the technical
specifications of the cash register. If inconsistent with the specifications, please do not
use the cash registers.
3. The main technical specifications
Power supply voltage: 220VAC～± 15%
Power: 80W ± 15%
Frequency: 50—60Hz
Temperature Operating: 0 ℃~ 40 ℃
Storage: -20 ℃~ +55 ℃
Relative humidity: 20% ~ 93% (40 ℃)
4. Preparing for use
• When placing the machine, please make note of the cable line to ensure that the
wires are fluent.
• Open the machine host power switch (note: we must ensure that there is a good
power supply ground).
• System installation (cash registers at the factory with only the DOS operating system
and customers using a genuine Windows operating system before installation).
• To perform some general sales operations, check monitors, printers, cash drawers
and other peripherals to ensure that they’re working properly.

PTE0120 User Manual
- 3 -
Touch POS Appearance
PTE0120 POS
1. 15-inch main display (resistance touch display)
2. Power button
3. 9.7-inch custom display
4. MSR

PTE0120 User Manual
- 4 -
Product Description
1. 15-inch LED display parameter
Item Specification Unit
Screen Diagonal 15 Inch
Active Area 304.128(H)×228.096(V) Mm
Pixel Pitch 0.099(H)×0.297(V) mm
Resolution 1024(H)×768(V) -
Pixel Arrangement R.G.B. Vertical stripe -
Display Mode Normally Black -
LED life 50000 Hour
White Luminance 350(Typ) Nit
Contrast Ratio 1000:1(Typ)/700:1(Min) -
Response Time 30 ms
Operating Voltage 3.3V V
Surface Treatment Hard-Coating(3H) -
Outline Dimension 326.5(H)×253.5(V)×9.7(D)Typ. Mm
Input signal LVDS -
Support Color 16.7M -

PTE0120 User Manual
- 5 -
2. 15-inch touch screen parameter
Size 326mm x 252mm
Visual Area 304mm x 228mm（4：3）
Resolution 1024 x 768
Refresh rate 60Hz
Dot pitch 0.297mm x 0.297mm
Resolution 4096 x 4096
color 16M
Response time 16ms
Items Symbol Min. Max. Unit Conditions
Supply Voltage VDD -0.5 5 V -
Operating
Temperature
TOP -20 70 ℃Note
Storage
Temperature
TST -20 70 ℃Note

PTE0120 User Manual
- 6 -
3. Motherboard parameter
Item Specification
PCB Form Factor Special
Dimensions 190*140mm
Layer 6 Layers
Color Green
Processor Processor Intel Celeron J6412 2.0GHz Burst To 2.6GHz
（Elkhart Lake)
Socket FCBGA1493
TDP 10W
Heat dissipation No FAN
Chips PCH N/A
CPU_PWM MP2940+MP2941
Super I/O IT8786E-I/EX
LVDS CH7511B
COM 75232
LAN compatible with RTL8111H-VB-
CG and
RTL8111H-CG，Colay RTL8106E
Audio ALC897-VA2, NS4251, 3W4Ω
Memory SlotType DDR4 SO-DIMM
Slot Number 1

PTE0120 User Manual
- 7 -
Memory Type DDR4 2400MHz
Max Memory 16GB
Graphics
Controller Intel® HD Graphics
VGA 1*DB15，1*Header
EDP/LVDS 1，LVDS，Colay EDP
Multi Display 2
LAN Connector 1*RJ45
PXE/RPL Boot Rom YES
Wake Up On LAN YES
USB USB2.0 5
USB3.0 4
Other BUZZER 1
CMOS Battery 1
COM1
Pin Signal
1 GND
2 RX
3 TX
4 RI
5 GND
6 RX
7 TX
8 RI

PTE0120 User Manual
- 8 -
4. Main board & I/O Port
NUM
Label
Components
1
JSPK
Speaker
2
JMIC
MIC
3
SATA
SATA SSD
4
SATA-PWR
4 pin Hard disk power-supply
port
5
CLR_COMS
Clean COMS setting
6 JUSB USB2.0
7
JUSB
USB2.0
8 JCOM2 COM2 port
9
JCOM3
COM3 port
10 F-PANEL
Turn on/off ,Hard disk indicator
light
11
INVTER
Display backlight port
12 PANEL_PWR Setting display supply voltage

PTE0120 User Manual
- 9 -
13 LVDS Connect LVDS display
14
WIFI/BT
Connect to WI-FI or Bluetooth
15 MINI SATA Mini hard disk port
16
JUSB
USB 2.0 port
17 JUSB USB 2.0 port
18
SO-DIMM
Memory port
19 JUSB USB 2.0 port
20
CPU-FAN
CPU fans port
21 VGA VGA port(inside)
22
DC OUT
12V power output
23 VGA VGA port
24
DC IN
12V power input
25 RJ12
Cash drawer port(12V or 24V
can be selected by
jumper ,Support OPOS)
26
USB
USB 3.0 port
27
USB
USB 3.0 port
28 LAN Network port
29
RJ45(COM)
COM1 port

PTE0120 User Manual
- 10
5. Dual screen settings
A) Open the folder in turn ,Install VGA driver. Then reboot the computer.

PTE0120 User Manual
- 11
B) In the Desktop, Click the right mouse button, in turn , select ”Graphics Options”-“Output
To”-“Extended Desktop”-“Built-in Display +Monitor”

- 2 -
Warm Tips:
3nStar does not provide any data restoration and the backup service. 3nStar is not
responsible for damage or loss of data, programs, or storage media. Please make sure you
are in time to backup any information or programs that you consider valuable. Thank you for
your cooperation!

- 3 -
Appendix: Names of toxic and harmful substances or elements
and their contents
Part
Hazardous substance
PBD
E
Pb Hg Cd Cr(Ⅵ) PBB
External
device × × ○○○○
Cable part × ○○○○○
Switching
power supply × × ○○○○
Mainboard
and PCBA × ○○○○○
Memory × ○○○○○
HDD/SSD × ○○○○○
FAN × × ○○○○
Plastic part ○○○○○○
Aluminium
alloy × ○○× ○○
○: Said the content of toxic and harmful substances in all homogeneous materials in
the parts are specified in the SJ/T 113632006 limited the following requirements.
×: Said the content of toxic and harmful substances in at least one of the
homogeneous materials beyond the limitation of SJ/T11363 - 2006 provisions; on the
table in the "X" components, due to technical reasons at present can not achieve the
replacement, follow-up will gradually improve.
Note: the peripheral component contains the keyboard, display, printer, cash drawer, adapter,
customer display, laser gun or scanner

- 4 -