510 DESIGN Juno Accent Chair User manual

Pre-assembly:
Important safety instructions:
Please read carefully all instructions before assembly.
For your safety and ease, assembly by two or more adults is recommended.
Keep instructions for future use.
Item Description QTY
Page 1 of 2
Parts List
1
1
DISCLAIMER:
WHEN PROPERLY ASSEMBLED, THIS ITEM IS SAFE FOR INTENDED USE. SELLER IS NOT LIABLE FOR
ANY DAMAGES RESULTING FROM ITEM BEING IMPROPERLY ASSEMBLED AFTER PURCHASE.
Assembly Procedures:
4
1
1
Backrest
Left Backrest
Right Backrest
Chair Seat
ASSEMBLY INSTRUCTIONS
Description: Juno Accent Chair
P2
P3
P4
P5
P 6
Step 1: Assemble the chair on a flat, soft surface such as a carpet or cloth to prevent scratching the finish.
Take out the legs from carton box.
Do not discard any content until assembly is complete to avoid accidentally discarding small parts or hardware.
Take out all parts and hardware from box.
Plastic Washer
P1
Legs 4

Page 2 of 2
,
Thank you for your purchase
P6
P1
P4
P5
P3
P6
P1
P1
P2
P1
P1
(P2) x 4 Plastic Washer
Step 3: Turn the chair over and place it upright on a level
surface. Attach the Backrest (P3) to Chair seat (P6) as
shown below.
P6
P3
Step 5: Assembly is complete.
Step 2: Attach the legs (P1) into the holes on the bottom of
chair seat (P6) through plastic washer (P2) as shown below:
Step 4:Attach the Left Backrest (P4) and Right Backrest
(P5) to Backrest (P3) as shown below.
Note: legs can be adjusted with
adjustable levelers
ADDITIONAL NOTE ABOUT SAFETY: BOLTS MAY LOOSEN DURING NORMAL EVERYDAY USE. THEY SHOULD BE
MONTHS AND RE-TIGHTENED AS NEEDED TO PREVENT DAMAGE OR INJURYINSPECTED AT LEAST EVERY 3
AND ENSURE STABILITY.