7 A.M. Enfant PLUSHPOD User manual

User Manual
PLUSHPOD

Seat your child in the stroller or car
seat and fasten the safety harness as
per their manufacturer's instructions.
Unzip the front panel cover. Save the
WaxedPOD’s back for later use.
Slip the front panel’s inner bottom
pouch over the bottom of the stroller
or car seat to secure the cover.
Use the hook & loop straps located on
the sides of the front panel cover to
attach to sidebars.
Use the elastic drawstring located
underneath the top flap to adjust the
snugness.
Pull the elastic drawstring under the
pouch to adjust tightness.
On Stroller On Car Seat
1
2
34 5
6
HOW TO ONLY USE FRONT PANEL COVER
WARNING: Never leave child unattended in this product. Make sure that the child’s face is not covered by any part of this product. Child should never be placed face-down in this product. Do not use this
product as sleepwear or bedding. The child should not put buttons, plastic ends, snaps or other parts of this product into her/his mouth. Always use care when using zippers to avoid injury to the child.
User Manual
PLUSHPOD
PANEL COVER ONLY
Pull the car seat’s 5-point harness
through the large back opening.
Seat your child on the WaxedPOD in
the car seat and fasten the safety
harness as per manufacturer's
instructions.
Place the WaxedPOD onto the car
seat and unzip the front panel to
open the WaxedPOD.
Zip the WaxedPOD cover up.
Detach the removable back panel to
reveal the large back opening and to
eliminate material between your
baby’s back and the car seat. Store it
for stroller use.
Unzip the WaxedPOD cover.
4
Seat your child on the WaxedPOD in the
stroller and fasten the safety harness
as per manufacturer's instructions.
6
Pull the stroller’s 5-point harness
through the opening slits located on
the back of the WaxedPOD by
choosing the height of the slits
corresponding to your child’s size.
5
Use the hook & loop straps located
on the sides of the WaxedPOD to
attach to the stroller’s back or
sidebars in order to secure it.
3
12
3
4
5
BACK
12
34
5
REMOVABLE
PANEL
HOOD
HOOK & LOOP STRAPS
ANTI SLIP BACK
2 ADAPTABLE CROTCH
HARNESS SLITS
5-POINT HARNESS
OPENING
3 ADAPTABLE SHOULDER
HARNESS SLITS
HOW TO USE ON STROLLER
HOW TO USE ON CARSEAT
The Plush POD is machine washable. The care label is
located on the internal side of the product.
HOOK & LOOP STRAPS
Place the WaxedPOD onto the stroller.
1
2Optional: Put integrated mounting slip
on back side of hood over the top of the
stroller seat to prevent footmu from
slipping.
FRONT
SPACIOUS POCKETS
HOOK & LOOP OPENING
SOFT FAUX
SHEARLING LINING
WAXED COTTON
OUTER SHELL
Zip the WaxedPOD cover up and adjust the
snugness using the elastic drawstring
located underneath the top flap to create a
smaller enclosure around your child’s face.
7
To further envelop your child’s head,
connect the side flaps to the hood with
the hook & loop fasteners.
8