80/20 Xtreme DIY Racing Simulator User manual
Racing Simulator
Keyboard Arm Assembly
DIY2202-A1
Last updated: 08.01.2022
PREPARING TO BUILD
Thank you for your purchase with 80/20. We appreciate you building your idea with us. This assembly
guide will show you everything that comes with your purchase and diagrams for how to build it. All
proles will be tagged to match the materials list found on page 3. You can reference the instruction
diagrams starting on page 4.
Before you start, there are a few quick tips to consider to ensure a better build experience. First, allow
yourself plenty of space to unbox and layout all your proles and other products. Most importantly, nd
a large at work surface, either oor or table, to build on. This will ensure all connections and structures
are square and as strong as possible.
Included Tools: Racing Simulator Keyboard Arm
3/16” Hex Wrench 1/4” Hex Wrench5/32” Hex Wrench
As you start the build process, we encourage you to watch the assembly video on our YouTube channel
and follow along. This video will show how an 80/20 builder use each of the connection methods as the
build comes together.
If you have any questions about the assembly process and need assistance please contact 80/20’s
YouTube
Assembly Video
Dynamic Pivot
Fastener Video
80/20
Product Page
2
MATERIALS
ASSEMBLY
x1
x1
1530-UL - 22.00”
20.00” x 8.00”
Black ABS Haircell
1530-UL
A
B
Proles
Panels
Hardware
Racing Simulator Keyboard Arm
Living Hinge with
Brackets (1)
1/4-20 x .50”
FHSCS (2)
1/4-20 Standard
T-Nut (2)
Push-in for
End Cap (2)
1530 End Cap
(1)
The weight capacity for the keyboard
arm is 30 pounds evenly distributed.
This is not meant to climb or stand on.
3
AA
BB
GG
* Referenced
tag from racing
simulator instruction
manual (DIY1805-K1).
Copyright © 2022 80/20® LLC All rights reserved.
IMPORTANT SAFETY INSTRUCTIONS
Your safety and the safety of others are very important. Read instructions
thoroughly prior to assembly. Please follow assembly instructions. Check
for all parts before beginning assembly using the provided parts list to
verify that all parts required to assemble the product are included. This
kit contains parts that can be damaged if assembled incorrectly or in the
wrong sequence. 80/20 shall not be responsible for replacing parts lost or
damaged due to incorrect assembly. [Assistance is required during parts
of the assembly].
Warning: Not intended for use by children. Do not stack. Maximum load
is 30 lbs for the keyboard arm evenly distributed. Not intended for storage
of ammable or caustic chemicals. Ensure the arm is level. Do not climb,
sit or stand on.
80/20 QUALITY POLICY
80/20 is dedicated to providing its products free of actual defects in
material and workmanship. 80/20 will replace or repair, at 80/20’s option,
any product which, upon 80/20’s inspection is found to have a defect in
material and/or workmanship provided such defect is reported to 80/20
in writing within one (1) year of the date of shipment from 80/20’s factory
(“Quality Policy”).
This Quality Policy does not cover failures due to abuse, accidental
damages, or when repairs have been made or attempted by anyone other
than 80/20.
Should replacement of the defective items be unavailable, 80/20 reserves
the right to substitute items of 80/20’s choice with items of similar style,
color and quality. The terms of this Quality Policy are subject to change
without notice.
This Quality Policy is subject to the limitations set forth above. In
addition, this Quality Policy is made to the original purchaser only and
is effective only if items are purchased from 80/20 or one of 80/20’s
authorized distributors. 80/20’s obligations under the Quality Policy is
non-transferrable.
DISCLAIMER OF IMPLIED WARRANTIES
No warranty is made by 80/20, express or implied, that 80/20 products as
used in a customer’s design and specications are t for that customer’s
specic purpose.
APART FROM THE ABOVE QUALITY POLICY, THERE ARE NO
WARRANTIES, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING,
WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, WHICH EXTEND BEYOND THE
DESCRIPTION ON THE FACE HEREOF.
LIMITATION OF REMEDIES
YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS QUALITY
POLICY SHALL BE PRODUCT REPAIR OR REPLACEMENT AS
PROVIDED HEREIN. 80/20 SHALL NOT BE LIABLE FOR SPECIFIC,
INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
USE OF 80/20 PRODUCTS.
This quality policy provides customer with specic legal rights, and
customer may have other rights which may vary according to relevant
state laws.
MAINTENANCE
Regularly check fastener hardware for tightness.
CONTACT INFORMATION
For assistance in the U.S.A, call 1-260-248-8030. If you need further
assistance, you can write 80/20 with any questions or comments at
1701 South 400 East, Columbia City, IN 46725. Visit us on the web at
www.8020.net
1701 S 400 E, Columbia City, IN 46725 • PH: 260-248-8030 • FAX: 260-248-8029 • www.8020.net
Subscribe and catch all new 80/20 videos
4
