80/20 Xtreme DIY User manual

XDIY1708

YOUR
CLEAR
CLUTTER
Woodgrain Panel
Top Shelf
Hangers
Wire-Mesh
Watch the Xtreme DIY video for tips and tricks on
creating your own custom Entryway Bench.
• Black Anodize Provides Modern Look
• Mesh Allows Air and Moisture Flow
• Floor Glides Help Level Any Surface
• Durable and Long-Lasting Solution
• Design Tailored to Space
BENEFITS
HOW-TO VIDEO
Organize Any Entry
The entryway bench provides a central location to
store and organize shoes, coats, bags and more. Use
this in breezeways and mudrooms, or even inside the
house – its contemporary look transforms cluttered
entries. A woodgrain bench panel complements the
black anodize proles while the oor glides can be
used on a range of surfaces, from concrete to carpet.
Adaptable to Your Area
Design your entryway bench to t your space,
preferences and capacity requirements. Add
additional shelves, move hooks, incorporate drawers
or even turn the bench into a storage chest. This
solution is completely adaptable to your needs.

x1
x2
x2
x2
x2
x2
x2
x4
x2
x2
x7
1515-ULS-Black – 72.625”
1515-ULS-Black – 55.500”
1515-ULS-Black – 16.625”
1515-ULS-Black – 14.000”
counterbores only
1515-ULS-Black – 43.000”
1515-ULS-Black – 43.000”
1575-Black-FB – 43.000”
1575-Black-FB – 14.000”
9820 – 55.500”
9820 – 8.000”
A
G
H
D
E
F
B
I
J
C
• Panel Gasket x2
• Furniture Glides x4
• Economy Leveling Feet x10
• Anchor Fastener x24
• 5/16-18 x .625” FBHSCS x14
• 5/16-18 x .750” FHSCS x12
• 1/4-20 Drop-In T-nut x10
• 3/16 Hex Wrench
• 1/4 Hex Wrench
Important:
The maximum weight capacity for
bottom wire mesh panel is 50 pounds.
The maximum capacity for the bench top
panel is 400 pounds. The top shelf panel
has a maximum capacity of 100 pounds.
Hardware Accessories Tools Needed
x1
48.000” x 10.000”
48.000” x 18.000”
Panel M
Panel L
x1
43.750” x 14.750”
Panel K
18.000”
48.000”
10.000”
74.000”

ASSEMBLY INSTRUCTIONS
A
G
G
D
D
F
H
E
Panel K
Furniture Glides
Next build the front bench subassembly.
Connect prole E (2) using prole G (1) and
anchor fasteners (2). Attach bottom support
prole D (1) using anchor fasteners (2).
Install panel gasket into T-slot of all four
sides for bottom shelf. Slide panel K (1) into
same T-slots on back bench subassembly.
Bring two subassemblies together attaching
front of bench using anchor fasteners (4).
Thread furniture glides (4) into bottom of
assembly and stand it up. See gure 2.
Build the back of the bench connecting prole A
(2) using prole G (1) and anchor fasteners (2).
Next, connect bottom support prole D (1)
to same proles using anchor fasteners (2).
Attach prole H(2) to adjacent T-slot of proles
A using anchor fastener (2). Slide prole F (2) to
bottom of proles A using anchor fasteners (2).
See gure 1 for reference.
Figure 1
Figure 2
1
2

ASSEMBLY INSTRUCTIONS
I
C
J
B
G
Panel M
Panel L
Build the hanger section of the bench
by attaching prole C (2) together using
prole J (7) and FBHSCS (14). Connect
the hanger section between A proles
using anchor fasteners (4) and tighten
down at desired height.
Cap off A proles with prole G (1) using
anchor fasteners (2).
Attach panel M (1) to top of build using
FHSCS (6). See gure 4.
Figure 3
Figure 4
For the bench top subassembly
attach prole B (2) and prole I (2) to
each side of panel L (1) using FHSCS
(4). Connect B proles using prole G
(1) and anchor fasteners (2).
Connect subassembly to build using
FHSCS (2) in front uprights of bench.
See gure 3.
3
4
Important:
The maximum weight capacity for bottom wire mesh
panel is 50 pounds. The maximum capacity for the
bench top panel is 400 pounds. The top shelf panel has
a maximum capacity of 100 pounds.