9to5 seating Neo Lite User manual

ASSEMBLY
INSTRUCTIONS
Neo Lite
INS-P3150-Y1-PAC
Base (x1)
Back (x1) Seat (x1)
Cylinder (x1) Casters (x5)
Missing parts or hardware? Call 888.925.SEAT
Bolts (x3)
(attached to the
seat back)
Allen Wrench (x1)
(attached to the
bag with casters)
PARTS
HARDWARE
TOOLS STEP 1
Attach the casters and cylinder to the 5-star base.
1A. Firmly press the stems
of 5 casters into the 5 holes
in the base.
1B. Insert cylinder into
the center hole.
All hardware comes pre-attached in the back and/or seat.

STEP 3
Join the back and seat with the cylinder and base.
3211 Jack Northrop Ave. Hawthorne, CA 90250
PHONE 888.925.SEAT FAX 866.925.SEAT 9to5seating.com
©2021 9to5 Seating
Insert the assembled back/seat unit onto the cylinder,
which was placed in the base in Step 1. Press down
firmly to secure.
STEP 2
Attach the back to the seat.
2B. Place the back plate under the seat as shown,
aligning the holes. Using the Allen wrench, reattach
the screws from the top. If you have difficulty inserting
the back, you may try loosening the 4 bolts for the
mechanism. Attach the back, then retighten the back
bolts followed by the mechanism bolts.
2A. Using the Allen
wrench, remove the
3 bolts from the back.
Updated 2/16/2021