9to5 seating Strata User manual

ASSEMBLY
INSTRUCTIONS
Strata
INS-P1560-Y2-PAC
Base (x1)
Back (x1) Seat (x1)
Cylinder (x1) Casters (x5)
Missing parts or hardware? Call 888.925.SEAT
Bolts (x3)
(attached to the
seat back)
Allen Wrench (x1)
(attached to the
bag with casters)
PARTS
HARDWARE
TOOLS
STEP 1
Attach the casters and cylinder to the 5-star base.
1A. Firmly press the stems
of 5 casters into the 5 holes
in the base.
1B. Insert cylinder into
the center hole.
All hardware comes pre-attached in the back and/or seat.

STEP 3
Join the back and seat with the cylinder and base.
3211 Jack Northrop Ave. Hawthorne, CA 90250
PHONE 888.925.SEAT FAX 866.925.SEAT 9to5seating.com
©2021 9to5 Seating
STEP 2
Attach the back to the seat.
2B. Using the Allen
wrench, remove the 3 bolts
from the back.
2A. On the underside
of the seat, remove the
plastic cover, exposing
the mechanism.
2C. Place the back plate
under the seat as shown,
aligning the holes. Using
the Allen wrench, reattach
the bolts from the top.
Reattach the plastic cover.
Insert the assembled back/seat unit onto the cylinder,
which was placed in the base in Step 1. Press down
firmly to secure.
Updated 2/16/2021