A1 Touch AOD190 User manual

Page 1
USER’S MANUAL
AOD/ATS 190 metal case (touch) computer
Type: All in one A1Touch H370-I5-9400/AOD190-…..
Standard type,
also available as:
A1Touch Solution BV  : [phone]
 : [phone]
Hogeweg 21
NL-6367 BA Voerendaal : [e-mail]
The Netherlands :www.A1TouchSolution.nl
19 inch Rackmount
Black panelmount
RVS panelmount
Rear Mount

Page 2
Contents:
1. (Touch) Computer User’s Manual
1.0. Connection to the computer
1.1. Installation
1.2. Features
1.3. Plug and play function
1.4. Safety Precaution
1.5. OSD (On-Screen-Menu)
1.6. OSD Menu
1.7. Specifications
1.8. Contents of the retail package
1.9. Troubleshooting

Page 3
1.(Touch) Computer User’s Manual
1.0 Connection To the Computer:
1.1 Installation
•Mount the unit in position as desired.
You can adjust the connection for your PC environment via I/O panel of computer:
•Plug the DC cord of the AC adapter to the power connector and the plug
the end of AC adapter to and electrical outlet socket(110V/220V)
•Connect DC cord of adapter 12V DC (option 24v or 220v) to the computer

Page 4
1.2 Features
•AOD190 has 19” LCD and support up to 75Hz.
•Mini ITX format Computer with 6 core 6 threads Intel Core i5-9400 2.9 Ghz processor Active cooled
•Second connection external monitor via Displayport (Digital) possible.
•Microphone and speaker integration possible (option).
•You can adjust brightness, contrast, horizontal & vertical positions by OSD
•Menus and use auto adjust function for instant adjustment.
•High-qualified LCD Controller inside
•Robust design and power saving mode
•100% compatible with Windows PC environment without the installation of
•driver CD or software program.
1.3 Plug and Play Function
AOD150 is installed with OS on demand. These units are completely installed with activation completed and
with latest drivers for plug and play functionality.
1.4 Safety Precaution
We strongly recommend that you carefully read this User’s Manual before operating
your computer. FOLLOW INSTRUCTIONS in this manual.
Please read and comprehend all using directives before use this machine.
•Power
Use the type of power indicated on the marking label.
•Adapter
Only use an adapter designed of the LCD monitor.
•Plug
Do not remove any of the prongs of the monitor's three-pronged power plug.
Disconnect the power plug from the AC outlet if you will not use it for an indefinite period of time.
•Power and extension cord
•Use the proper power cord with ground conductor
Do not overload wall outlets or power cords. Ensure that the total of all units plugged
into the wall outlet does not exceed 7 amperes.
Do not allow anything to rest on the power cord. Do not locate this product where persons will walk on the
cord.
•Care and maintenance
Slots and openings in the cabinet are provided for ventilation. Do not block or cover these openings. Do
not push objects of any kind into cabinet slots or openings. The screen surface is easily scratched. Do not
use paper towels to clean the display. Avoid touching it with your fingers, pens, or pencils.
•Turn off the AC adapter and the monitor over long periods when not in use.

Page 5
1.5 OSD (On-Screen-Menu)
menu select down up power
Button
Function
Status
POWER
Power ON or OFF
ON/OFF
LED
Indicate working status
Green: On
Red: Stand-by
Orange: No signal
UP
Launch OSD Menu or
add value
Move to OSD Menu
DOWN
Launch OSD Menu or
add value
Move to OSD Menu
SELECT
Select OSD Menu
MENU
On /Off OSD Menu
1.6 OSD Menu
ITEM
Sub Menu
Description
Value
Color
Contrast
0 ~ 100
50
Brightness
0 ~ 100
100
Color Adjust
Adjust color of red, green, blue
Color Temp
9300,6500,5800, sRGB, User
USER
Image Setting
Clock
0 ~ 100
50
RGB ONLY
Phase
0 ~ 100
50
Sharpness
0 ~ 4
2
H Position
0 ~ 100
50
V Position
0 ~ 100
50
OSD Menu
OSD H. Pos.
0 ~ 100
50
OSD V, Pos.
0 ~ 100
50
OSD timer
3 ~ 60
10
Language
English,Francais,Deutsh, Espanol
English
Signal Source
-
D-SUB, DVI, Auto Search
Auto Search
Audio
-
Setup
Reset
Reset to factory settings
Backlight
0 ~ 100
100
SET ID
ON, OFF
ON
Aspect Ratio
Fixed Aspect, 4BY3, 5BY4, Full Screen
Full Screen

Page 6
1.7 Specifications
Monitor specs:
Color:
Black powder Coated (other colors on request)
Model:
19 inch XGA TFT LCD Monitor
Type:
Resolution (max):
19 inch Color Active Matrix TFT LCD (LG LM190EOA)
1280 x 1024 (SXGA)
Color:
16,7 million
Pixel:
0.0976 x 0.2928 mm
Brightness:
300 cd/m²
Contrast ratio:
800:1
Viewing angle:
89°/89° horizontal & 89°/89° vertical
Response time
8 ms
Active area:
376,32 (H) x 301,056 (V) mm
Computer specs:
Type
computerboard:
Intel H370-I
Chipset:
Intel® H370
Processor:
Processor Intel Core i5 9400, 55W, 9th gen. 2.9Ghz, 6 core, 6 thread, UHD
Graphics 630,
Memory
Supported memory types
DDR4-SDRAM
Amount of memory slots
2
Memory slot type
DIMM
Memory Channel
Dual
Non-ECC
yes
Supported memory clock speeds
2133,2400,2666 MHz
Maximum internal memory
32 GB
Not gebufferd memory
Ja
Bios
BIOS type
UEFI AMI
BIOS-memory size
128 Mbit
ACPI version
6.1
Clear CMOS jumper
Ja
Plug and play
Ja
System Management BIOS (SMBIOS)
version
3.1
Graphics
Maximum memory grafical adapter
1024 MB
Built-in grafical adapter
Ja
Grafical adapter-family
Intel
Maximum resolution
4096 x 2304 Pixels
Network
Ethernet LAN
yes
Ethernet interface type
Gigabit Ethernet
LAN controller
Intel I219V,Realtek RTL8111H
Wi-Fi
yes
Wi-Fi-standards
802.11a,Wi-Fi 5
(802.11ac),802.11b,802.11g,Wi-Fi
4 (802.11n)

Page 7
Bluetooth
yes
Bluetooth-version
5.0
Audio
7.1 CH HD (Realtek S1220A) - ROG SupremeFX
IDE, SATA, Flash
4 x SATA3 Connectors, 2x M.2 (M) slots, supporting NCQ, AHCI and
Hot Plug
RAID:
0, 1, 5, 10
Operating system
Windows 7, 8, 10 Linux, Win CE, Win7emb, Win10IOT.
I/O connections
back:
USB 3.2 Gen 1 (3.1 Gen 1) Type A
: 3
USB 3.2 Gen 1 (3.1 Gen 1) Type C
: 1
USB 3.2 Gen 2 (3.1 Gen 2) Type A
: 2
Ethernet LAN (RJ-45)-ports
: 2
HDMI-ports
: 1
DisplayPorts
: 1
DisplayPort version
: 1.2
S/PDIF-out
: yes
Digital audio, optical out
: 1
WiFi-AP antenna jack
: 2
Internal I/O:
PCI Express x16 (Gen 3.x) slots
: 1
USB 2.0 connections
: 1
USB 3.2 Gen 1 (3.1 Gen 1)-connections
: 1
Amount of SATA III connectors
: 4
Audioconnector
: yes
General:
Energy requirements
35W normal use; 80 W max.; 5 W stand by.
Power
Power supply 84 W External
Weight
4 Kg
Mounting:
VESA 100mm; (Bracket/ stand is optional; See: mounting_brackets)
Dimensions system
(BxHxD)
424x350x88 mm (model without bezel)
Options:
Functionality:
With or without touch
- without touch:
Acrylic or glass
- with touch for
option "Mounting
behind glass = YES":
Type of Touch:
Projected Capacitive A1touch and Zytronic.
Not sure what to use? Call us at [phone] or send us contactform
+ Projected
Capacitive
(A1touch):
-For glass upto 5mm or Acrylic glass upto 2.5mm.
-Touchable with finger, glove and pcap stylus.
-10 points touch
-activation force less than 1 gramm.
+ Projected
Capacitive (Zytronic):
-For glass upto 20mm or Acrylic glass upto 10mm.
-Touchable with finger, glove and pcap stylus.
-2 points touch
-activation force less than 1 gramm.
- with touch for
option "Mounting
behind glass = NO":
5 wire resitive, Surface Accoustic Wave or Projected Capacitive

Page 8
- 5 wire resistive :
-Standard non-glare.
-Touchable with finger, glove and stylus.
-Single touch
-activation force less than 40 gramm.
- SAW:
-Standard glare.
-Touchable with finger and glove.
-Single touch
-activation force less than 85 gramm.
- Projected
Capacitive:
-Standard glare.
-Touchable with finger, glove and pcap stylus.
-10 points touch
-activation force less than 1 gramm.
External protection:
Standard IP44 or IP65 or higher (not for SAW)
Memory capacity:
No memory (standard), 2, 4 or 8 Gb SoDimm
Storage capacity
Sata:
No storage (standard), Harddisk 500 Gb or SSD in 120/240/480 GB or 1TB.
Operating system:
NO OS (standard), Win7 embedded WSP7 multilangual, Win7Pro,
Win8Home and Pro, Win10Home or Pro, Windows 10 IOT (embedded),
Linux
Input equipment:
None (standard) or wireless keyboard/mouse
Accoustic options:
No speakers/ microfone (standard), Soundbar 2x2Watt integrated, Soundbar
+ microfone integrated.
1.8 Contents of Package
Computer system
AC/DC Adapter Power cord Other Cables (option)

Page 9
1.9 Troubleshooting
TO REDUCE THE RISK OF ELECTRIC SHOK, DO NOT REMOVE COVER.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONELLE.
•The system does not respond after you turn on the system :
-Make sure that the monitor is turned on via OSD button.
-Turn off the power and check the system’s power cord, AC adapter,
for proper connection.
•Appear the “ No Input the Signal" :
-Check the connecting of the vga cable on I/O panel computer and power on computer.
•Appear the “ Input Not the Supported" :
-Input signal are insuperable, reset the video mode and adjust video driver settings.
•The appearance is not at the screen center.:
-Use “AUTO ADJUST”, refer to the Controls section.
•The characters on the screen are too dim or too bright
-Choose fit color temperature, use “AUTO COLOUR ADJUST or manually adjust
“RGB ADJUSTMENT, refer to the Control section.