A1 Touch AOD/ATS 170 User manual

USER’S MANUAL
AOD/ATS 170 metal case (touch) computer
Type J3455
Standard type,
also available as:
A1Touch Solution BV  : [phone]
 : [phone]
Hogeweg 21
NL-6367 BA Voerendaal : [e-mail]
The Netherlands  :www.A1TouchSolution.nl
PCAP panelmount 19 inch Rackmount Black panelmount RVS panelmount Hinges

Contents:
1. (Touch) Computer User’s Manual
1.0. Connection to the computer
1.1. Installation
1.2. Features
1.3. Plug and play function
1.4. Safety Precaution
1.5. OSD (On-Screen-Menu)
1.6. OSD Menu
1.7. Specifications
1.8. Contents of the retail package
1.9. Troubleshooting

1. (Touch) Computer User’s Manual
1.0 Connection To the Computer:
1.1 Installation
•Mount the unit in position as desired.
You can adjust the connection for your PC environment via I/O panel of computer:
•Plug the DC cord of the AC adapter to the power connector and the plug

the end of AC adapter to and electrical outlet socket(110V/220V)
•Connect DC cord of adapter 12V DC (option 24v or 220v) to the computer
1.2 Features
•AOD170 has 17” LCD and support up to 75Hz.
•Mini ITX format Computer with quad core Intel J3455 upto 2.3 Ghz processor Passive cooled !
•Second connection external monitor via DVI (Digital) possible.
•Microphone and speaker integration possible (option).
•You can adjust brightness, contrast, horizontal & vertical positions by OSD
•menus and use auto adjust function for instant adjustment.
•High-qualified LCD Controller inside
•Robust design and power saving mode
•100% compatible with Windows PC environment without the installation of
•driver CD or software program.
1.3 Plug and Play Function
AOD170 is installed with OS on demand. These units are completely installed with activation completed and
with latest drivers for plug and play functionality.
1.4 Safety Precaution
We strongly recommend that you carefully read this User’s Manual before operating
your computer. FOLLOW INSTRUCTIONS in this manual.
Please read and comprehend all using directives before use this machine.
•Power
Use the type of power indicated on the marking label.
•Adapter
Only use an adapter designed of the LCD monitor.
•Plug
Do not remove any of the prongs of the monitor's three-pronged power plug.
Disconnect the power plug from the AC outlet if you will not use it for an indefinite period of time.
•Power and extension cord
•Use the proper power cord with ground conductor
Do not overload wall outlets or power cords. Ensure that the total of all units plugged
into the wall outlet does not exceed 7 amperes.
Do not allow anything to rest on the power cord. Do not locate this product where persons will walk on the
cord.
•Care and maintenance
Slots and openings in the cabinet are provided for ventilation. Do not block or cover these openings. Do
not push objects of any kind into cabinet slots or openings. The screen surface is easily scratched. Do not
use paper towels to clean the display. Avoid touching it with your fingers, pens, or pencils.
•Turn off the AC adapter and the monitor over long periods when not in use.
1.5 OSD (On-Screen-Menu)

menu select down up power
Button Function Status Hot Key
POWER Power ON or OFF
LED Indicate operation status
Green : Normal operation
Red : Off Mode
Amber : No valid input, Sleep mode
Green Blinking: No Signal
-
UP Select next menu item
Increase slider value Auto Configuration on no
menu status
DOWN Select previous menu item
Decrease slider value Auto Configuration on no
menu status
SELECT Select Highlighted function Input Source Change on
no menu status
MENU On /Off OSD Menu
1.6 OSD Menu
OSD STRUCTURE

ITEM
Sub Menu
Description
Value
Picture
Brightness
Adjust the backlight level of screen
50(0~100)
Contrast
Increase/ decrease picture contrast
50(0~100)
Sharpness
Control the clarity of details of pictures
2(0 ~ 4)
H Position
Adjust picture horizontal position
50(0~100)
RGB
ONLY
V Position
Adjust picture vertical position
50(0~100)
Clock
Adjust picture width
50(0~100)
Phase
Adjust picture focus quality
30(0~100)
Color
Color Status
Management
Select the color of picture mode User(User, Warm, Normal,
Cl)
Red
Adjust color of red rate
50(0~100)
RGB
ONLY
Green
Adjust color of green rate
50(0~100)
Blue
Adjust color of blue rate
50(0~100)
Auto Color
Auto color calibration
To Start
OSD
Language Select OSD menu language
English(English, Deutsh,
Francais, Italiano, Espanol,
H Position
Adjust the OSD horizontal position
50(0~100)
V Position
Adjust the OSD vertical position
50(0~100)
Transparency
Select the transparency of the OSD
33 (0~100)
OSD Time
Adjust the OSD menu timeout
10(3~30)
SETUP
Source
Select the input signal Source
RGB, DVI, AUTO
Factory reset
Reset to factory settings
To Start
Aspect
On/ Off the fit to screen
Off(On/Off)
Backlight DIM
On/ Off the backlight Dimming(PWM)
Off(On/Off)
Set ID
On/ Off the RS232 control
Off(On/Off)
Optional
Volume
Adjust the audio volume
62(0~100)
Optional
Mute
On/ Off the audio output
Off(On/Off)
Optional

Page 7
1.7 Specifications
Name: AOD / ATS 17" (touch) Computer J3455
Monitor specs:
Color:
Black powder Coated (other colors on request)
Model:
17 inch XGA TFT LCD Monitor
Type:
17 inch Color Active Matrix TFT LCD (AUO M170ETN01.1)
Resolution (max):
1280 x 1024 (WVGA)
Color:
16,2 million
Pixel:
0.264 x 0.264 mm
Brightness:
300 cd/m²
Contrast ratio:
1000:1
Viewing angle:
88°/88° horizontal & 85°/85° vertical
Response time
5 ms
Active area:
337,9 (H) x 270,3 (V) mm
Computer specs:
Type computerboard
Intel J3455 Quad core upto 2.3 Ghz, passive cooled
Chipset
No seperate chipset
Memory
2 x DDR3/DDR3L SO-DIMM Slots
Bios
- 64Mb AMI UEFI Legal BIOS with GUI support
- Supports Plug and Play
- ACPI 5.0 compliant wake up events
- Supports jumperfree
- SMBIOS 3.0 support
Processor
Intel J3455 Quad core upto 2.3Ghz processor
Flashmodule/ Harddisk
Sata SSD and SATA Harddisk possible
Graphics
- Integrated Intel® HD Graphics 500: 12 EUs inside (Up to 750MHz)
- DirectX 12, Pixel Shader 5.0
- Three graphics output options: D-Sub, DVI-D and HDMI
- Supports Triple Monitor
- Supports HDMI 2.0 with max. resolution up to 4K x 2K (4096x2160) @ 60Hz
- Supports DVI-D with max. resolution up to 1920x1200 @ 60Hz
- Supports D-Sub with max. resolution up to 2048x1536 @ 60Hz
- Supports Auto Lip Sync, xvYCC and HBR (High Bit Rate Audio) with HDMI
2.0 Port (Compliant HDMI 2.0 monitor is required)
- Supports HW Accelerated Decoders: H.264 @ level 5.2, HEVC (H.265) 10b
@MP level 5.1 (GPU accelerated), JPEG, VP8, VP9
- Supports HDCP with DVI-D and HDMI 2.0 Ports
- Supports Full HD 1080p Blu-ray (BD) playback with DVI-D and HDMI 2.0
Ports
LAN (RJ-45)
- PCIE x1 Gigabit LAN 10/100/1000 Mb/s
- Realtek RTL8111GR
- Supports Wake-On-WAN
- Supports Wake-On-LAN
- Supports Lightning/ESD Protection (ASRock Full Spike Protection)
- Supports LAN Cable Detection
- Supports Energy Efficient Ethernet 802.3az

Page 8
- Supports PXE
Audio
- 7.1 CH HD Audio with Content Protection (Realtek ALC892 Audio Codec)*
- Premium Blu-ray Audio support
- Supports Surge Protection (ASRock Full Spike Protection)
- ELNA Audio Caps
IDE, SATA, Flash
2 x SATA2 3.0 Gb/s Connectors, supporting NCQ, AHCI and
Hot Plug
Hardware Monitor + Power
Management
Temperature, Voltage, Case open function, Watch Dog timer (manufacturing
option)
Operating system
Windows 7, 8, 10 Linux, Win CE, Win7emb, Win10IOT.
I/O system:
- 1 x PS/2 Mouse Port
- 1 x PS/2 Keyboard Port
- 1 x D-Sub Port (occupied)
- 1 x DVI-D Port
- 1 x HDMI Port
- 1 x Optical SPDIF Out Port
- 2 x USB 2.0 Ports (Supports ESD Protection (ASRock Full Spike Protection))
- 2 x USB 3.1 Gen1 Ports (Supports ESD Protection (ASRock Full Spike
Protection))
- 1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED LED)
- HD Audio Jacks: Side Speaker / Rear Speaker / Central / Bass / Line in / Front
Speaker / Microphone
Internal I/O:
- 1 x PCI Express 2.0 x1 Slot
- 1 x M.2 Socket (Key E), supports type 2230 WiFi/BT module
- 1 x COM Port Header
- 1 x TPM Header
- 1 x Chassis Intrusion and Speaker Header
- 1 x CPU Fan Connector (3-pin)
- 1 x Chassis Fan Connector (3-pin)
- 1 x 24 pin ATX Power Connector
- 1 x Front Panel Audio Connector
- 2 x USB 2.0 Headers (Support 3 USB 2.0 ports) (Supports ESD Protection
(ASRock Full Spike Protection))
- 1 x USB 3.1 Gen1 Header (Supports 2 USB 3.1 Gen1 ports) (Supports ESD
Protection (ASRock Full Spike Protection))
Energy requirements
35W normal use; 80 W max.; 5 W stand by.
Power
Power supply 84 W External
Weight
4 Kg
Mounting:
VESA 100mm; (Bracket/ stand is optional; See: mounting_brackets)
Dimensions system(B x H x D)
380x312x87 mm (model without bezel)
Options:
Functionality:
With or without touch
- without touch:
Acrylic or glass
- with touch for option
"Mounting behind glass = YES":
Type of Touch:
Projected Capacitive A1touch and Zytronic.
Not sure what to use? Call us at [phone] or send us contactform
+ Projected Capacitive
(
A1touch):
-For glass upto 5mm or Acrylic glass upto 2.5mm.
-Touchable with finger, glove and pcap stylus.
-10 points touch
-activation force less than 1 gramm.

Page 9
+ Projected Capacitive
(
Zytronic):
-For glass upto 20mm or Acrylic glass upto 10mm.
-Touchable with finger, glove and pcap stylus.
-2 points touch
-activation force less than 1 gramm.
- with touch for option
"Mounting behind glass = NO":
5 wire resitive, Surface Accoustic Wave or Projected Capacitive
- 5 wire resistive :
-Standard non-glare.
-Touchable with finger, glove and stylus.
-Single touch
-activation force less than 40 gramm.
- SAW:
-Standard glare.
-Touchable with finger and glove.
-Single touch
-activation force less than 85 gramm.
- Projected Capacitive:
-Standard glare.
-Touchable with finger, glove and pcap stylus.
-10 points touch
-activation force less than 1 gramm.
External protection:
Standard IP44 or IP65 or higher (not for SAW)
Memory capacity:
No memory (standard), 2, 4 or 8 Gb SoDimm
Storage capacity Sata:
No storage (standard), Harddisk 500 Gb or SSD in 120/240/480 GB or 1TB.
Operating system:
NO OS (standard), Win7 embedded WSP7 multilangual, Win7Pro, Win8Home and Pro,
Win10Home or Pro, Windows 10 IOT (embedded), Linux
Input equipment:
None (standard) or wireless keyboard/mouse
Accoustic options:
No speakers/ microfone (standard), Soundbar 2x2Watt integrated, Soundbar +
microfone integrated.
1.8 Contents of Package
Computer system

Page
10
AC/DC Adapter Power cord Drivers cd Other Cables (option)
1.9 Troubleshooting
TO REDUCE THE RISK OF ELECTRIC SHOK, DO NOT REMOVE COVER.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONELLE.
•The system does not respond after you turn on the system :
-Make sure that the monitor is turned on via OSD button.
-Turn off the power and check the system’s power cord, AC adapter,
for proper connection.
•Appear the “ No Input the Signal" :
-Check the connecting of the vga cable on I/O panel computer and power on computer.
•Appear the “ Input Not the Supported" :
-Input signal are insuperable, reset the video mode and adjust video driver settings.
•The appearance is not at the screen center.:
-Use “AUTO ADJUST”, refer to the Controls section.
•The characters on the screen are too dim or too bright
-Choose fit color temperature, use “AUTO COLOUR ADJUST or manually adjust
“RGB ADJUSTMENT, refer to the Control section.