Aaeon OPD-212A User manual

LCD Displays OPD-212A/215A/217A
Industry LCD Display User’s Manual i
OPD-
212A/215A/217A
Open Frame
Industrial LCD Displays

LCD Displays OPD-212A/215A/217A
Industry LCD Display User’s Manual 1
Copyright Notice
Thisdocument iscopyrighted 2002,byAAEONTechnologyIn.All rights are
reserved. The original manufacturer reserves the right to make improvements
to the products described in this manual at any time without notice.
No part of this manual may be reproduced, copied, translated, or transmitted
in any form or by any means without the prior written permission of the
original manufacturer. Information provided in this manual is intended to be
accurate and reliable. However, the original manufacturer assumes no
responsibility for its use, nor for any infringements upon the rights of third
parties, which may result from its use.
The material in this document is for product information only and is subject
to change without notice.

LCD Displays OPD-212A/215A/217A
Industry LCD Display User’s Manual 2
Packing List
The LCD monitor comes with the following standard parts shown as
below. Check and make sure they are included and in good condition.
If anything is missing or damaged, contact the dealer immediately.
1. Industrial DisplayPanel x 1 pc
2. Industrial Display Panel User’s Manual CD-ROM x 1 pc
3. Power adapter x 1 pc
4. VGA Cable 1.8M x 1 pc
5. Panel Mounting Kits
6. Screws bag
7. Adapter cable saddle (For OPD series only)
It is better for you to keep the carton and the packing materials in
case you might need them for packing or moving in the future.

LCD Displays OPD-212A/215A/217A
Industry LCD Display User’s Manual 3
Safety & Warranty
1. Read these safety instructions carefully.
2. Keep this user's manual for later reference.
3. Disconnect this equipment from any AC outlet before cleaning. Do
not use liquid or spray detergents for cleaning. Use a damp cloth.
4. For pluggable equipment, the power outlet must be installed near the
equipment and must be easily accessible.
5. Keep this equipment away from humidity.
6. Put this equipment on a reliable surface during installation. Dropping
it or letting it fall could cause damage.
7. The openings on the enclosure are for air convection. Protect the
equipment from overheating. DO NOT COVER THE OPENINGS.
8. Make sure the voltage of the power source is correct before
connecting the equipment to the power outlet.
9. Position the power cord so that people cannot step on it. Do not place
anything over the power cord.
10. All cautions and warnings on the equipment should be noted.
11. If the equipment is not used for a long time, disconnect it from the
power source to avoid damage by transient over-voltage.
12. Never pour any liquid into an opening. This could cause fire or
electrical shock.
13. Never open the equipment. For safety reasons, only qualified service
personnel should open the equipment.
14. If any of the following situations arises, get the equipment checked by
service personnel:
a. The power cord or plug is damaged.
b. Liquid has penetrated into the equipment.
c. The equipment has been exposed to moisture.

LCD Displays OPD-212A/215A/217A
Industry LCD Display User’s Manual 4
d. The equipment does not work well, or you cannot get it to
work according to the users manual.
e. The equipment has been dropped and damaged.
f. The equipment has obvious signs of breakage.
15. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT
WHERE THE STORAGE TEMPERATURE IS BELOW-20°
C(-4°F) OR ABOVE 60° C (140° F). IT MAY DAMAGE THE
EQUIPMENT.

LCD Displays OPD-212A/215A/217A
Industry LCD Display User’s Manual 5
Contents
Copyright Notice ........................................................................................1
Packing List ..................................................................................................2
Safety & Warranty ......................................................................................3
Chapter 1 General Information
Introduction...............................................................................................8
Open Frame Structure Illustration......................................................... 9
Features of Display Panels.......................................................................10
Dimension...................................................................................................15
Chapter 2 Hardware Installation
Before Unpacking.......................................................................................17
Connecting Power..................................................................................... 18
Connecting the Computer.........................................................................19
VGA Port Connector.................................................................................20
Serial Ports Connector for Touch............................................................21
Panel Mounting....................................... ...................................................22
Chapter 3 On Screen Display Control
On Screen Display (OSD) Controller......................................................26
Chapter 4 DriversInstallation
Display Driver Installation.........................................................................35
Touchscreen Driver Installation...............................................................47
Specifications...............................................................................................48
Troubleshooting..........................................................................................51
Exploded Diagram......................................................................................21

LCD Displays OPD-212A/215A/217A
Industry LCD Display User’s Manual 6
General
Information
Chapter
1

LCD Displays OPD-212A/215A/217A
Industry LCD Display User’s Manual 7
Introduction
Congratulations on your purchase of the Industry Display Panel
TFT LCD monitor -a marvelous contribution of cutting edge
technology.
The LCD monitor has been designed with serious thoughts to
present the best performance for most applications. Symbol of
elegance, its compact and slim profile is well suited in working
locations where space is at a premium.
The TFT LCD monitor displays sharper, more brilliant, crisper and
flicker-free images. Complying with the power management
regulations of VESA DPMS, the LCD monitor is extremely energy
efficient and a power saver. Plus, the LCD monitor hasextremely low
radiation emissions and near zero electromagnetic fields which are
supreme benefits.
Fully compatible with PC system, the LCD monitor provides full
interface for all sorts of related standards. Supported by “Plug &
Play”complyingwith DDC1/DDC2B, installing the LCD monitor is
absolutely trouble free.
The On Screen Display menu providesuser a convenient interface to
make right adjustment for optimum display performance.

LCD Displays OPD-212A/215A/217A
Industry LCD Display User’s Manual 8
Open Frame Structure Illustration

LCD Displays OPD-212A/215A/217A
Industry LCD Display User’s Manual 9
Features of Display Panels
This menu provides full range of analog interface LCD panels, which
are 12.1”(SVGA), 15”(XGA) and 17”(SXGA) high-brightness, long
lifetime TFT LCD monitors.
nStainless steel open-frame architecture
n12.1” SVGA (800x600 resolution)
15” XGA (1024x768 resolution)
17”SXGA (1280x1024resolution) colorTFT
LCD display
nAnalog RGB signals directly input with A/D
board interface offering multi-scan function
nRS-232, Adapter, VGA terminals and AV input
nOSD (On Screen Display) function for display
adjustment
nTouchscreen (Optional)
nAC-in /DC-out external power adapter
nSwivel ARM: VESA 75/100 Standard
nAluminum front bezel (Optional)
nAuto detect NTSC and Secam
nAdapter holder

LCD Displays OPD-212A/215A/217A
Industry LCD Display User’s Manual 10
General Specifications
nConstruction:Stainless steel open-frame architecture
nMounting: Panel mount or Swivel ARM
nInput signal: RGB, Composite video, S-Video
nControl: OSD (On Screen Display) on the rear panel
nPower Supply: external power adapter
nDimension:
OPD-212A:
350(W) x 275(H) x 48.7(D) mm
without bezel
366(W) x 291(H) x 49.7(D) mm
with standard bezel
483(W) x 310(H) x 49.7(D) mm
with rack mount bezel
OPD-215A:
428(W) x 320(H) x 53.3(D) mm
without bezel
444(W) x 336(H) x 54.3(D) mm
with standard bezel
483(W) x 354.80(H) x 54.3(D) mm
with rack mount bezel
OPD-217A:
482(W) x 398(H) x 57.2(D) mm
without bezel
483(W) x 399(H) x 58.2(D) mm
with standard bezel
483(W) x 399(H) x 58.2(D) mm
with rack mount bezel

LCD Displays OPD-212A/215A/217A
Industry LCD Display User’s Manual 11
nNet Weight:
OPD-212A: 5.5Kg
OPD-215A: 6.5Kg
OPD-217A: 15.36Kg
Touchscreen (Optional)
nType: 8-wire or 5-wire.Analog resistive
Resolution:
Ø1024x1024 for OPD-212A/OPD-215A
Ø4096x4096 for OPD-217A
nLight transmission:
l75% or higher
nOperating pressure:
Model OPD-212A OPD-215A OPD-217A
For Finger (grams) 50 50 113
Stylus pen (grams) 25 25 -
Contact bounce (ms) <10 <10 -
nController: RS-232 interface
nController Power consumption: 8mA@5V, 4MHz
nOS support: MS DOS, Windows 98, Windows NT,
Windows 2000.

LCD Displays OPD-212A/215A/217A
Industry LCD Display User’s Manual 12
Environmental Specifications
nOperating temperature:0°C to 45°C (32~113°F)
nVibration: 10~150Hz 0.15mm 10cycle 1G
nShock:15G peak acceleration (11 msec. Duration)
nEMI:FCC / CE Class A

LCD Displays OPD-212A/215A/217A
Industry LCD Display User’s Manual 13
Dimensions
483.0
OPD-212A
330.0
350.0100.0
Front Bezel Size
100.070.0
30.0
57.2
310.4
88.9 88.9
Chassis Cutout Size:333*258 mm
255.0 275.0
115.0
75.0
70.0
75.0
Unit:mm
85.7
48.7
291.0
366.0
186.9
248.4
LCD Cutout Size:248.4*186.9 mm
OPD-215A
402.0
120.0
444.0
Front Bezel Size
336.0
88.0
483.0
354.8
76.2
101.6 101.6
Cutout Size:405*299 mm
296.0
79.0 320.0
88.0120.0
79.0
75.0
75.0
30.0
Unit:mm
90.3
53.3
428.0
6.0 6.0 59.3

LCD Displays OPD-212A/215A/217A
Industry LCD Display User’s Manual 14
101.6
399.0
483.0
Front Bezel Size
101.5 120.6
OPD-217A
362.0
398.0
85.0
482.0
85.085.0
90.075.0 90.0 90.0 75.0
Cutout Size:449*365 mm
85.0 57.2
94.2
446.0
Unit:mm
6.0 6.0

LCD Displays OPD-212A/215A/217A
Industry LCD Display User’s Manual 15
Hardware
Installation
Chapter
2

LCD Displays OPD-212A/215A/217A
Industry LCD Display User’s Manual 16
Before Unpacking
It is very important to locate the LCD monitor in a suitable
environment.
§The surface for placing the LCD monitor should be stable and
level.
§Make sure the place has good ventilation, and out of direct
sunlight;awayform sourcesof excessivedust,dirt, heat,water,
moisture and vibration.
§Convenience for connecting the LCD monitor to the related
facilities should be well considered too.

LCD Displays OPD-212A/215A/217A
Industry LCD Display User’s Manual 17
Connecting Power
TopowerontheLCDmonitor,usetheprovidedAC-DC adapter and
thepowercordtoconnecttothepoweroutput socketofthemonitor.
Fasten the connections securely.
A ”Surge Protection” device plugged between the AC-DC adapter
and the wall outlet is recommended to prevent the effects of sudden
current variations from reaching the LCD monitor. The sudden
peaks of electricity may harm the LCD monitor.

LCD Displays OPD-212A/215A/217A
Industry LCD Display User’s Manual 18
Connecting to the Computer
nTurn off the computer and the LCD monitor before connecting
them.
nUse the Monitor-to-PC VGA cable to connect the LCD monitor to
your computer. The cable heads are the same on either side.
nFasten the connections securely.

LCD Displays OPD-212A/215A/217A
Industry LCD Display User’s Manual 19
VGA Port Connector
It is a DB-15 VGA connector. The following table shows the
pin-out assignments of this connector.
Signal Name Pin # Pin # Signal Name
Red 12Green
Blue 34N.C.
GND 56GND
GND 78GND
N.C. 910 GND
N.C. 11 12 SDA
HSYNC 13 14 VSYNC
SCL 15