Aaeon OPD-215A User manual

LCD Display OPD-212A/215A/217A
OPD-212A/215A/217A
Open Frame
Industrial LCD Displays
OPD-212A/ 215A/ 217A Manual 4th Ed
January 2009

LCD Display OPD-212A/215A/217A
i
Copyright Notice
This document is copyrighted, 2009. All rights are reserved. The
original manufacturer reserves the right to make improvements to
the products described in this manual at any time without notice.
No part of this manual may be reproduced, copied, translated, or
transmitted in any form or by any means without the prior written
permission of the original manufacturer. Information provided in this
manual is intended to be accurate and reliable. However, the
original manufacturer assumes no responsibility for its use, nor for
any infringements upon the rights of third parties, which may result
from its use.
The material in this document is for product information only and is
subject to change without notice. While reasonable efforts have
been made in the preparation of this document to assure its
accuracy, AAEON, assumes no liabilities resulting from errors or
omissions in this document, or from the use of the information
contained herein.
AAEON reserves the right to make changes in the product design
without notice to its users.

LCD Display OPD-212A/215A/217A
ii
Acknowledgments
 Intel®is registered trademarks of Intel®Corporation.
 IBM, PC/AT, PS/2 are trademarks of International Business
Machines Corporation.
 Microsoft®Windows is a registered trademark of Microsoft®
Corporation.
 RTL is a trademark of Realtek Semi-Conductor Co., Ltd.
 C&T is a trademark of Chips and Technologies, Inc.
 UMC is a trademark of United Microelectronics Corporation.
 ITE is a trademark of Integrated Technology Express, Inc.
 SiS is a trademark of Silicon Integrated Systems Corp.
 VIA is a trademark of VIATechnology, Inc.
All other product names or trademarks are properties of their
respective owners.

LCD Display OPD-212A/215A/217A
iii
Packing List
The LCD monitor comes with the following standard parts shown
as below. Check and make sure they are included and in good
condition. If anything is missing or damaged, contact the dealer
immediately.
 1 Industrial Display Panel
 1 Utility CD-ROM
Contains User’s Manual (in PDF format), Drivers and
Utilities
 1 Power Adapter
 1 VGA Cable 1.8m
 1 DVI Cable 1.8m
 Panel Mounting Kits
 Screws Bag
 Adapter Cable Saddle
 Waterproof Sponge
 Cable, RS-232 (optional)
If any of these items are missing or damaged, you should contact your
distributor or sales representative immediately.

LCD Display OPD-212A/215A/217A
iv
Safety & Warranty
1. Read these safety instructions carefully.
2. Keep this user's manual for later reference.
3. Disconnect this equipment from any AC outlet before cleaning. Do
not use liquid or spray detergents for cleaning. Use a damp cloth.
4. For pluggable equipment, the power outlet must be installed near
the equipment and must be easily accessible.
5. Keep this equipment away from humidity.
6. Put this equipment on a reliable surface during installation.
Dropping it or letting it fall could cause damage.
7. The openings on the enclosure are for air convection. Protect the
equipment from overheating. DO NOT COVER THE OPENINGS.
8. Make sure the voltage of the power source is correct before
connecting the equipment to the power outlet.
9. Position the power cord so that people cannot step on it. Do not
place anything over the power cord.
10. All cautions and warnings on the equipment should be noted.
11. If the equipment is not used for a long time, disconnect it from the
power source to avoid damage by transient over-voltage.
12. Never pour any liquid into an opening. This could cause fire or
electrical shock.
13. Never open the equipment. For safety reasons, only qualified
service personnel should open the equipment.

LCD Display OPD-212A/215A/217A
v
14. If any of the following situations arises, get the equipment
checked by service personnel:
a. The power cord or plug is damaged.
b. Liquid has penetrated into the equipment.
c. The equipment has been exposed to moisture.
d. The equipment does not work well, or you cannot get it to
work according to the users manual.
e. The equipment has been dropped and damaged.
f. The equipment has obvious signs of breakage.
15. DO NOT LEAVE THIS EQUIPMENT IN AN UNCONTROLLED
ENVIRONMENT WHERE THE STORAGE TEMPERATURE IS
BELOW -20° C (-4°F) OR ABOVE 60° C (140° F). IT MAY
DAMAGE THE EQUIPMENT.
FCC
This device complies with Part 15 FCC Rules.
Operation is subject to the following two
conditions: (1) this device may not cause
harmful interference, and (2) this device
must accept any interference received
including interference that may cause
undesired operation.
Caution:
It may cause the danger of explosion if battery is incorrectly
replaced. Replace only with same or equivalent type
recommended by the manufacturer.

LCD Display OPD-212A/215A/217A
vi
Below Table for China RoHS Requirements
产品中有毒有害物质或元素名称及含量
AAEON Display
有毒有害物质或元素
部件名称 铅
(Pb)
汞
(Hg)
镉
(Cd)
六价铬
(Cr(VI))
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
印刷电路板
及其电子组件 ×○○○○○
外部信号
连接器及线材 ×○○○○○
外壳 ×○○○○○
液晶模块 ×○○○○○
触控模块 ×○○○○○
电源 ×○○○○○
O：表示该有毒有害物质在该部件所有均质材料中的含量均在
SJ/T 11363-2006 标准规定的限量要求以下。
X：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出
SJ/T 11363-2006 标准规定的限量要求。
备注：
一、此产品所标示之环保使用期限，系指在一般正常使用状况下。
二、上述部件物质触控模块为选购品。

LCD Display OPD-212A/215A/217A
vii
Contents
Chapter 1 General Information
1.1 Introduction................................................................1-2
1.2 Open Frame Structure Illustration.............................1-3
1.3 Features of Display Panels.......................................1-4
1.4 General Specification................................................1-5
1.5 Detailed Specification of OPD-212A/215A/217A......1-7
1.6 Dimension .................................................................1-10
1.7 Waterproof Sponge Position.....................................1-12
1.8 Exploded Diagram.....................................................1-14
Chapter 2 Hardware Installation
2.1 Before Unpacking......................................................2-2
2.2 Connecting Power.....................................................2-3
2.3 Connecting to the Computer.....................................2-4
2.4 VGA Port Connector..................................................2-5
2.5 Serial Port Connector for Touch................................2-6
2.6 Panel Mounting .........................................................2-7
2.7 Rack Mounting (Optional) .........................................2-9
2.8 VESA Wall Mounting.................................................2-10
Chapter 3 On Screen Display Control
3.1 On Screen Display (OSD) Board Description . .........3-2
3.2 LED Function ............................................................3-3

LCD Display OPD-212A/215A/217A
viii
3.3 OSD Main Menu: Push the MENU key ....................3-3
3.4 Select input source ...................................................3-4
3.5 Contrast/ Brightness-Submenu ................................3-5
3.6 Geometry Menu ........................................................3-6
3.7 Color Temperature-Submenu . .................................3-7
3.8 Color Temperature-Submenu (Select video input) . .3-8
3.9 RGB Color-Submenu . ..............................................3-9
3.10 Language-Submenu................................................3-10
3.11 OSD Manager-Submenu.........................................3-11
3.12 Auto Config-Submenu.............................................3-12
3.13 Mode Information-Submenu....................................3-13
3.14 Memory Recall-Submenu........................................3-14
3.15 Exit Menu-Submenu................................................3-15
Chapter 4 Driver Installation
4.1 Display Driver Installation..........................................4-2
4.2 TouchScreen Driver Installation................................4-11
Appendix A Troubleshooting
A.1 Troubleshooting.....................................................A-2

LCD Display OPD-212A/215A/217A
Chapter 1 General Information 1-1
General
Chapter
1
Information

LCD Display OPD-212A/215A/217A
Chapter 1 General Information 1-2
1.1 Introduction
Thank you for purchasing of the Industry Display Panel TFT LCD
monitor - a marvelous contribution of cutting edge technology.
The LCD monitor has been designed with serious thoughts to
present the best performance for most applications. Symbol of
elegance, its compact and slim profile is well suited in working
locations where space is at a premium.
The TFT LCD monitor displays sharper, more brilliant, crisper and
flicker-free images. Complying with the power management
regulations of VESA DPMS, the LCD monitor is extremely energy
efficient and a power saver. Plus, the LCD monitor has extremely
low radiation emissions and near zero electromagnetic fields which
are supreme benefits.
Fully compatible with PC system, the LCD monitor provides full
interface for all sorts of related standards. Supported by “Plug &
Play” complying with DDC1/DDC2B, installing the LCD monitor is
absolutely trouble free.
The On Screen Display menu provides user a convenient interface
to make right adjustment for optimum display performance.

LCD Display OPD-212A/215A/217A
Chapter 1 General Information 1-3
1.2 Open Frame Structure Illustration

LCD Display OPD-212A/215A/217A
Chapter 1 General Information 1-4
1.3 Features of Display Panels
This menu provides full range of analog interface LCD panels,
which are 12.1”(SVGA), 15”(XGA) and 17” (SXGA) high-brightness,
long lifetime TFT LCD monitors.
 Stainless steel open-frame architecture
 12.1” SVGA (1024 x 768 resolution)
15” XGA (1024 x 768 resolution)
17” SXGA (1280 x 1024 resolution) color TFT LCD display
 Analog RGB signals directly input with A/D board interface
offering multi-scan function
 RS-232, adapter, VGA terminals and AV+S Video input + DVI
input
 OSD (On Screen Display) function for display adjustment
 Touchscreen (Optional)
 AC-in/ DC-out external power adapter
 Swivel ARM: VESA 75/100 standard (OPD-212A/ 215A:
VESA 75 only, OPD-217A: VESA 75/100)
 Aluminum front bezel (Optional)
 Auto detect NTSC, PAL
 Adapter holder

LCD Display OPD-212A/215A/217A
Chapter 1 General Information 1-5
1.4 General Specification
 Construction Stainless steel open-frame architecture
 Mounting Panelmount or Swivel ARM
 Input signal RGB, Composite video, S-Video, DVI
 Control OSD (On Screen Display) on the rear panel
 Power Supply External power adapter
 Dimension OPD-212A:
350(W) x 275(H) x 48.7(D) mm
without bezel
366(W) x 291(H) x 54.7(D) mm
with standard bezel
483(W) x 310(H) x 54.7(D) mm
with rackmount bezel
OPD-215A:
428(W) x 320(H) x 53.3(D) mm
without bezel
444(W) x 336(H) x 59.3(D) mm
with standard bezel
483(W) x 354.8(H) x 59.3(D) mm
with rackmount bezel
OPD-217A:
482(W) x 398(H) x 57.2(D) mm
without bezel
483(W) x 399(H) x 63.2(D) mm
with standard bezel
483(W) x 399(H) x 63.2(D) mm
with rackmount bezel
 Gross Weight OPD-212A: 7.7Kg
OPD-215A: 11.9Kg

LCD Display OPD-212A/215A/217A
Chapter 1 General Information 1-6
OPD-217A: 14.8Kg
TouchScreen (Optional)
 Type 5-wire, Analog resistive
 Resolution 2048 x 2048
 Light
transmission OPD-212A/OPD-215A: 80% ±2%
OPD-217A: 80% ±2%
 Controller RS-232 interface (optional)
Environmental
 Operating
temperature 32°F ~113°F (0°C to 45°C)
 Vibration 5-500Hz, 1G random vibration
 Shock 15G peak acceleration (11 msec. Duration)
 EMC FCC / CE Class A
 Safety UL (for OPD-215-E series only)

LCD Display OPD-212A/215A/217A
Chapter 1 General Information 1-7
1.5 Detailed Specification of OPD-212A/215A/217A
OPD-212A
Panel
 Type Color TFT
 Size Diagonal “12.1”
 Brightness 150 cd/m2(TYP.)
 Back light MTBF 50,000 hrs
 Pixel Pitch 0.3075(H) x 0.3075(V) mm
 Viewing Angle
(Horizontal)
140o
 Viewing Angle (Vertical) 120o
 Resolution 800 x 600
 Display Modes Full Screen in 640x480,
800x600, 1024x768 Modes
 Color 262K
Power Consumption
 Input Voltage AC 100-240V~1.8A, 50~60Hz
 Output DC 12V / 5A(Max)

LCD Display OPD-212A/215A/217A
Chapter 1 General Information 1-8
OPD-215A
Panel
 Type Color TFT
 Size Diagonal “15”
 Brightness 250 cd/m2(TYP.)
 Back light MTBF 50,000 hrs
 Pixel Pitch 0.297(H) x 0.297(V) mm
 Viewing Angle
(Horizontal)
150o
 Viewing Angle (Vertical) 145o
 Resolution 1024 x 768
 Display Modes Full Screen in 640x480,
800x600, 1024x768 Mode
 Color 16.2M
Power Consumption
 Input Voltage AC 100-240V~1.8A, 50~60Hz
 Output DC 12V / 5A(Max)

LCD Display OPD-212A/215A/217A
Chapter 1 General Information 1-9
OPD-217A
Panel
 Type Color TFT
 Size Diagonal 17”
 Brightness 300 cd/m2 (TYP.)
 Back light MTBF 50,000hrs
 Contrast Ratio 400: 1
 Pixel Pitch 0.264(H) x 0.264(V) mm
 Viewing Angle
(Horizontal)
140o
 Viewing Angle (Vertical) 140o
 Resolution 1280 x 1024
 Display Modes Full Screen in 640x480,
800x600, 1024x768,
1280x1024 Mode
 Color 16.2M
Power Consumption
 Input Voltage AC 100-240V~1.8A, 50~60Hz
 Output DC 12V / 5A(Max)

LCD Display OPD-212A/215A/217A
Chapter 1 General Information 1-10
1.6 Dimension
483.0
OPD-212A
330.0
350.0100.0
Front Bezel Size
100.070.0
30.0
57.2
310.4
88.988.9
Chassis Cutout Size:333*258 mm
255.0 275.0
115.0
75.0
70.0
75.0
Unit:mm
85.7
48.7
291.0
366.0
186.9
248.4
LCD Cutout Size:248.4*186.9 mm
OPD-215A
402.0
120.0
444.0
Front Bezel Size
336.0
88.0
483.0
354.8
76.2
101.6101.6
Cutout Size:405*299 mm
296.0
79.0320.0
88.0120.0
79.0
75.0
75.0
30.0
Unit:mm
90.3
53.3
428.0
6.0 6.0 59.3

LCD Display OPD-212A/215A/217A
Chapter 1 General Information 1-11
101.6
399.0
483.0
101.5 120.6
OPD-217A
364.0
398.0
85.0
482.0
85.085.0
90.0
75.0 90.0 90.0 75.0
Chassis Cutout Size:449*367 mm
85.0 57.2
94.2
446.0
Unit:mm
6.0
483.0
Front Bezel Size
399.0
LCD Cutout Size:342*274.4 mm
342.0
274.4
30.0 57.2