AARC Systems AARC-EVAC User manual

aarcsystems.com
AARC-EVAC Indoor Standalone
Wireless Linked Message Player
& Message Player/Repeater Units
Installation & Operation Manual
Components Supplied
1 x ARX43E72-FB
Message Player
Unit with
Flashing Beacons
OR
Message Player/Repeater Unit
with Flashing Beacons
2 Speaker
1 x ARX43E40-FB
Flashing Beacons
No Audio
Also available:
3 Speaker
1 x 15 VDC Power Supply
2 x 15 Watt Speakers*
1 x ARX43E72-FB-R
1 x AARC Antenna
1 x ARX43E73-FB
Message Player
Unit with
Flashing Beacons
OR
Message Player/Repeater Unit
with Flashing Beacons
1 x 15 VDC Power Supply
3 x 15 Watt Speakers*
1 x ARX43E73-FB-R
1 x AARC Antenna
1 x ARX43E74-FB
Message Player
Unit with
Flashing Beacons
OR
Message Player/Repeater Unit
with Flashing Beacons
1 x 15 VDC Power Supply
4 x 15 Watt Speakers*
1 x ARX43E74-FB-R
1 x AARC Antenna
*A combination of Horn and Box Speakers as required.
4 Speaker

Installation Diagram
aarcsystems.com
AARC-EVAC Wireless Alert Transmitters
Installation & Operation Manual
2
Plastic Screw Locks
Speaker Connection SPK1
Speaker Connection SPK2
Speaker Connection SPK3
Speaker Connection SPK4
Speaker Volume Control SPK1
Speaker Volume Control SPK2
Speaker Volume Control SPK3
Speaker Volume Control SPK4
1 of 4 Wall Mounting holes, these are pre-drilled.
Cable gland entry for L/H & R/H Speakers
Power Supply input
On/Off Switch
LED Status Indicator
Antenna Connection or pre-installed antenna
(‘N’ Type Socket)
Alarm Buzzer (sounds if battery requires servicing)
AARC-EVAC TXANT443N Antenna

aarcsystems.com
AARC-EVAC Wireless Alert Transmitters
Installation & Operation Manual
3
Installation Instructions
1. Removing Front Cover
2. Fixing to the wall
3. Connecting to Power Supply
4. Alert to Evac Auto-Changeover
5. Attaching the antenna
Note:
6. Fitting the external speakers
Note:
7. Turning the unit on
a)
Note:
b)
c)
d)
Note:
e)
f)
8. Replacing the lid
Specifications
Digital Data Radio Receiver
Audio File Format
Audio Data Storage Device
Audio Output
Internal UPS Battery Backup
Power Supply
Dimensions
Antenna

aarcsystems.com
AARC-EVAC Wireless Alert Transmitters
Installation & Operation Manual
4
Maintenance
The UPS Battery condition should be checked regularly for correct operation. This can be done
by observing the battery condition indicator on the bottom of the unit (see below for details).
This procedure should be added to your company or organisation’s maintenance schedule.
AC Power & UPS Battery Condition Indicator
The LED light in the clear lens at the bottom of the box will indicate the condition of the UPS
battery/AC power supply to the unit.
Constant Green
Battery Voltage good, AC Power Supply connected, system running.
Replacement Battery: 7Ah 12V Sealed Lead Acid (SLA) Battery
Green Slow Flash
Battery Voltage good, AC Power Supply off line system running
on UPS.
Green Rapid Flash
Power supply connected, unit internal power switch ( ) is in
the off position (system switched off).
Red Constant
AC Power connected Battery charging Condition, system off,
whilst Battery Low.
Red Rapid Flash
Battery test failed but battery serviceable, AC Power Supply
Red Flash once every 15s, Buzzer sounds every 60s
Green Constant with Brief Red Flash and Buzzer every 4s
AC Power Supply connected, system running, UPS Battery
Voltage Low, not serviceable and battery replacement required.
10